User Manual
Table Of Contents
- Table of Contents
- Overview
- Preparations
- Recording
- Basic Operation Procedure
- Selecting the Video Format
- Switching the ND Filters
- Using the 5600K CC Filter
- Adjusting the White Balance
- Adjusting the Black Balance
- Displaying the Markers and Zebra Patterns
- Setting the Gain
- Setting the Electronic Shutter
- Adjusting the Iris
- Adjusting the Zoom
- Adjusting the Focus
- Reducing Flickers
- Setting the Time Data
- Recording Audio Signals
- Outputting the Color Bars and Reference Tone
- Recording Shot Marks
- Adding the OK Mark
- Rec Review
- Changing Functions of the Assignable Buttons
- Interval Recording
- Frame Recording
- Picture Cache Recording
- Slow & Quick Motion Recording
- Freeze Mix: Image Alignment
- Picture Profiles
- Deleting Clips
- Operating Planning Metadata
- Playback
- Thumbnail Screens
- Playing Back Clips
- Clip Operations
- Clip Operation Menus
- Basic Operations of the Clip Operation Menus
- Displaying the Detailed Information of a Clip
- Adding/Deleting the OK Mark to/from a Clip (HD Mode Only)
- Copying Clips
- Deleting Clips
- Displaying the EXPAND CLIP Screen
- Displaying the SHOT MARK Screen (HD Mode Only)
- Adding/Deleting Shot Marks (HD Mode Only)
- Changing the Index Frame (HD Mode Only)
- Dividing a Clip (HD Mode Only)
- Status Displays
- Menu Configuration and Detailed Settings
- Storing/Retrieving the Setting Data
- Connecting External Devices
- Appendixes
Setup Menu List
110
Menu Configuration and Detailed Settings
The functions and available settings of menus are listed below.
The default settings set at the factory are shown in bold face (example:
Speed).
Note
The items and setting values that cannot be selected at the time depending on the version of the camcorder,
the input or output statuses and the setting status of other menu items, are shaded.
Setup Menu List
CAMERA SET Menu
CAMERA SET
Menu items Subitems and setting values Contents
Auto Black
Bal.
Adjusting the
black balance
automatically
Execute/Cancel Select “Execute” to start the automatic black balance
adjustment.
Gain Setup
Assigning gain
levels to the three
GAIN switch
positions
Low
–3 / 0 / 3 / 6 / 9 /12 /18 dB
Set the gain level to be used when the switch is set to the L
position.
Mid
–3 / 0 / 3 / 6 / 9 /12 /18 dB
Set the gain level to be used when the switch is set to the M
position.
High
–3 / 0 / 3 / 6 / 9 / 12 / 18 dB
Set the gain level to be used when the switch is set to the H
position.
Shutter
Specifying
operating
conditions of the
electrical shutter
Mode
Speed / Angle / ECS
Select modes of the Electronic Shutter.
Shutter Speed
1/100
Set the shutter speed when Speed mode is selected.
The available setting values vary depending on the frame rate
of the video format selected (see page 48).
Shutter Angle
11.25º / 22.5º / 45º / 72º / 86.4º /
90º / 144º / 150º / 172.8º /180º /
216.0º
Set the shutter angle when Angle mode is selected.
When the frame rate is set to a value in the range of 1 to 16 in
Slow & Quick Motion mode, you cannot select 72º, 86.4º, 144º,
150º, 172.8º, and 216.0º.
ECS Frequency
60.00
Set the ECS frequency when ECS mode is selected.
The available setting values vary depending on the frame rate
of the video format selected.
Slow Shutter
Setting the
Slow Shutter mode
Setting
On / Off
Turn Slow Shutter mode on/off.
Number of Frames
2 to 8
Set the number of frames to accumulate.
Color Bar Type
Selecting the types
of color bar
Multi / 75% / 100% Select the type of color bars displayed when you press the
BARS/CAM button.
Multi: To output multiformat color bars
75%: To output 75% color bars
100%: To output 100% color bars