User Manual
Table Of Contents
- Table of Contents
- Overview
- Preparations
- Recording
- Basic Operation Procedure
- Selecting the Video Format
- Switching the ND Filters
- Using the 5600K CC Filter
- Adjusting the White Balance
- Adjusting the Black Balance
- Displaying the Markers and Zebra Patterns
- Setting the Gain
- Setting the Electronic Shutter
- Adjusting the Iris
- Adjusting the Zoom
- Adjusting the Focus
- Reducing Flickers
- Setting the Time Data
- Recording Audio Signals
- Outputting the Color Bars and Reference Tone
- Recording Shot Marks
- Adding the OK Mark
- Rec Review
- Changing Functions of the Assignable Buttons
- Interval Recording
- Frame Recording
- Picture Cache Recording
- Slow & Quick Motion Recording
- Freeze Mix: Image Alignment
- Picture Profiles
- Deleting Clips
- Operating Planning Metadata
- Playback
- Thumbnail Screens
- Playing Back Clips
- Clip Operations
- Clip Operation Menus
- Basic Operations of the Clip Operation Menus
- Displaying the Detailed Information of a Clip
- Adding/Deleting the OK Mark to/from a Clip (HD Mode Only)
- Copying Clips
- Deleting Clips
- Displaying the EXPAND CLIP Screen
- Displaying the SHOT MARK Screen (HD Mode Only)
- Adding/Deleting Shot Marks (HD Mode Only)
- Changing the Index Frame (HD Mode Only)
- Dividing a Clip (HD Mode Only)
- Status Displays
- Menu Configuration and Detailed Settings
- Storing/Retrieving the Setting Data
- Connecting External Devices
- Appendixes
![](/manual/sony/pmw-f3k/user-manual-english/images/img-30.png)
Attaching a Lens
30
Preparations
If you have attached an aberration correction
lens
The aberration correction function is activated
automatically. Starting the camcorder with an
aberration correction lens may require more time
than normally because of data loading at start-up.
The lenses supplied with the PMW-F3K are
aberration correction lenses.
Contact a Sony service representative for
information about other aberration correction
lenses.
Adjusting the flange focal length
Adjustment of the flange focal length (distance
between the lens mount attachment plane and the
imaging plane) is necessary in the following
situations:
• The first time a lens is attached
• When changing lenses
• If the focus is not sharp at both telephoto and
wide angle with a zoom lens
The flange focal length for this camcorder can be
adjusted by rotating the adjustment screw.
Use an Allen wrench (sized 7/64 inch) for the
adjustment.
Counterclockwise rotation lengthens the flange
focal length and clockwise rotation shortens it.
Removing the lens
Proceed as follows:
1 While holding the lens, turn the lens
mount frame counterclockwise.
2 Pull the lens forward to remove.
Note
When another lens is not immediately attached,
attach the lens mount cap to its original position
and secure it by turning the lens mount frame
clockwise.
By your storing the data (such as compensation
data) specific to the lenses in files, required
adjustments and compensation can be performed
merely by retrieving the appropriate file when
changing lenses.
For details on the lens files, see “Lens Files” on
page 132.
P
L
A
Y
/
P
A
U
S
E
F
F
W
D
Adjustment screw of flange focal length
Using Lens Files