User Manual
Table Of Contents
- Table of Contents
- Overview
- Preparations
- Recording
- Basic Operation Procedure
- Selecting the Video Format
- Switching the ND Filters
- Using the 5600K CC Filter
- Adjusting the White Balance
- Adjusting the Black Balance
- Displaying the Markers and Zebra Patterns
- Setting the Gain
- Setting the Electronic Shutter
- Adjusting the Iris
- Adjusting the Zoom
- Adjusting the Focus
- Reducing Flickers
- Setting the Time Data
- Recording Audio Signals
- Outputting the Color Bars and Reference Tone
- Recording Shot Marks
- Adding the OK Mark
- Rec Review
- Changing Functions of the Assignable Buttons
- Interval Recording
- Frame Recording
- Picture Cache Recording
- Slow & Quick Motion Recording
- Freeze Mix: Image Alignment
- Picture Profiles
- Deleting Clips
- Operating Planning Metadata
- Playback
- Thumbnail Screens
- Playing Back Clips
- Clip Operations
- Clip Operation Menus
- Basic Operations of the Clip Operation Menus
- Displaying the Detailed Information of a Clip
- Adding/Deleting the OK Mark to/from a Clip (HD Mode Only)
- Copying Clips
- Deleting Clips
- Displaying the EXPAND CLIP Screen
- Displaying the SHOT MARK Screen (HD Mode Only)
- Adding/Deleting Shot Marks (HD Mode Only)
- Changing the Index Frame (HD Mode Only)
- Dividing a Clip (HD Mode Only)
- Status Displays
- Menu Configuration and Detailed Settings
- Storing/Retrieving the Setting Data
- Connecting External Devices
- Appendixes
![](/manual/sony/pmw-f3k/user-manual-english/images/img-35.png)
Handling SxS Memory Cards
35
Preparations
Note
Do not operate the write-protect switch of an SxS
memory card while it is set in the camcorder.
Temporarily remove the card from the camcorder
before changing the switch setting.
Inserting an SxS memory card
1 Open the cover.
2 Insert the SxS memory card into the
slot.
The access lamp lights in red then changes to
green once the memory card is ready for use.
3 Close the cover.
Status indications by the access lamps
Card slots A and B are accompanied by the
respective access lamps to indicate their statuses.
Removing an SxS memory card
1 Open the cover, once press the eject
button to release the lock, then pull the
button out.
Inserting/Removing an SxS
Memory Card
Write-protect switch
SLOT SELECT
ON OFF
AB
SLOT SELECT button
Card slots
Access lamps
Eject buttons
Cover
Lamp Slot statuses
Lights in
red
Accessing the loaded SxS memory card
(writing/reading data)
Lights in
green
Standby (ready for recording or
playback using the loaded SxS memory
card)
Off • No SxS memory card is loaded.
• The loaded card is invalid.
• An SxS memory card is loaded, but
another slot is active.
MENU
SEL/SET
CAN
O
N
S
L
O
T
S
E
L
E
C
T
O
FF
PICTURE P
A
B
D
C
IN
With the label facing right
MENU
SEL/SET
CAN
O
N
S
L
O
T
S
E
L
E
C
T
O
FF
PICTURE P
A
B
D
C
IN
Press and unlock the button.