User Manual
Table Of Contents
- Table of Contents
- Overview
- Preparations
- Recording
- Basic Operation Procedure
- Selecting the Video Format
- Switching the ND Filters
- Using the 5600K CC Filter
- Adjusting the White Balance
- Adjusting the Black Balance
- Displaying the Markers and Zebra Patterns
- Setting the Gain
- Setting the Electronic Shutter
- Adjusting the Iris
- Adjusting the Zoom
- Adjusting the Focus
- Reducing Flickers
- Setting the Time Data
- Recording Audio Signals
- Outputting the Color Bars and Reference Tone
- Recording Shot Marks
- Adding the OK Mark
- Rec Review
- Changing Functions of the Assignable Buttons
- Interval Recording
- Frame Recording
- Picture Cache Recording
- Slow & Quick Motion Recording
- Freeze Mix: Image Alignment
- Picture Profiles
- Deleting Clips
- Operating Planning Metadata
- Playback
- Thumbnail Screens
- Playing Back Clips
- Clip Operations
- Clip Operation Menus
- Basic Operations of the Clip Operation Menus
- Displaying the Detailed Information of a Clip
- Adding/Deleting the OK Mark to/from a Clip (HD Mode Only)
- Copying Clips
- Deleting Clips
- Displaying the EXPAND CLIP Screen
- Displaying the SHOT MARK Screen (HD Mode Only)
- Adding/Deleting Shot Marks (HD Mode Only)
- Changing the Index Frame (HD Mode Only)
- Dividing a Clip (HD Mode Only)
- Status Displays
- Menu Configuration and Detailed Settings
- Storing/Retrieving the Setting Data
- Connecting External Devices
- Appendixes
Adjusting the Iris
50
Recording
Notes
• Slow Shutter cannot be used when the video
format is SP 1440/23.98P, the camcorder is in
Slow & Quick Motion mode, or “Auto Shutter”
is “On.”
• When a format of the interlace system is
selected, the Slow Shutter On/Off setting
cannot be changed in the following conditions:
—Recording is in progress.
—Cache Rec is On.
—A setting which includes “HDV” or
“DVCAM” is selected with “SDI/HDMI/
i.LINK I/O Select” of the VIDEO SET
menu.
Adjust the iris opening using the iris ring of the
lens according to the brightness of the subject.
For operations of the lens, refer to the operation
guide of the lens.
For lens which supports the iris position
indication, the current setting is displayed on the
screen when you press the DISPLAY/BATT
INFO button.
When the “TLCS” (total level control) setting of
the CAMERA SET menu has been changed, the
current setting is indicated with a symbol before
the iris value.
++: Approx. one stop further open
+: Approx. half a stop further open
No symbol: Standard
–
: Approx. half a stop further closed
– –
: Approx. one stop further closed
For details on TLCS, see “TLCS” (page 112) in
“Setup Menu List.”
Adjusting the Iris
TLCS
.
M
F
∗
ATW 4300K
PPOFF
++
T1.6
18dB
1 1.5 2 3 4 5 7 10