User Manual
Table Of Contents
- Table of Contents
- Overview
- Preparations
- Recording
- Basic Operation Procedure
- Selecting the Video Format
- Switching the ND Filters
- Using the 5600K CC Filter
- Adjusting the White Balance
- Adjusting the Black Balance
- Displaying the Markers and Zebra Patterns
- Setting the Gain
- Setting the Electronic Shutter
- Adjusting the Iris
- Adjusting the Zoom
- Adjusting the Focus
- Reducing Flickers
- Setting the Time Data
- Recording Audio Signals
- Outputting the Color Bars and Reference Tone
- Recording Shot Marks
- Adding the OK Mark
- Rec Review
- Changing Functions of the Assignable Buttons
- Interval Recording
- Frame Recording
- Picture Cache Recording
- Slow & Quick Motion Recording
- Freeze Mix: Image Alignment
- Picture Profiles
- Deleting Clips
- Operating Planning Metadata
- Playback
- Thumbnail Screens
- Playing Back Clips
- Clip Operations
- Clip Operation Menus
- Basic Operations of the Clip Operation Menus
- Displaying the Detailed Information of a Clip
- Adding/Deleting the OK Mark to/from a Clip (HD Mode Only)
- Copying Clips
- Deleting Clips
- Displaying the EXPAND CLIP Screen
- Displaying the SHOT MARK Screen (HD Mode Only)
- Adding/Deleting Shot Marks (HD Mode Only)
- Changing the Index Frame (HD Mode Only)
- Dividing a Clip (HD Mode Only)
- Status Displays
- Menu Configuration and Detailed Settings
- Storing/Retrieving the Setting Data
- Connecting External Devices
- Appendixes
Setting the Time Data
54
Recording
mode selected with the TC/UB SET menu is
restored.
Specify the timecode to be recorded with
“Timecode” and “TC Format” of the TC/UB SET
menu.
For details on menu operations, see “Basic Menu
Operations” on page 107.
Setting the timecode to a desired value
1 Set “Mode” of “Timecode” to “Preset.”
2 Specify the timecode value on the
Setting line and select “SET.”
Resetting the timecode
You can reset the timecode to be recorded in
running modes to “00:00:00:00.”
1 Select “Reset” of “Timecode.”
2 Select “Execute.”
Using the actual time as the timecode
Set “Mode” of “Time Code” to “Clock.”
The time of the built-in clock is recorded as the
timecode.
Switching between DF and NDF of the
timecode
Using “TC Format” of the TC/UB SET menu, DF
(drop-frame mode) and NDF (non-drop frame
mode) of the timecode can be switched.
Note, however, that the mode is fixed either to DF
or NDF regardless of the TC Format setting,
depending on the current frame-rate setting.
Restrictions on the timecode
The timecode setting is restricted by the current
video format.
1)The frame digits in “Setting” is limited to 00, 04, 08,
12, 16, and 20.
The frame at the beginning of recording is limited to
00, 04, 08, 12, 16, or 20.
As the SDI OUT connector output becomes 60i
because of the 2-3 pull-down process except when
“23.98P Output” (page 116) is set to “23.98PsF” for
1920/23.98P in E-E Display/Recording mode, the
frame digits of the timecode added to the SDI OUT
connector output are changed to values in the range of
00 to 29.
2)Even in Clock mode, the timecode is gradually
shifted, because it is counted by NDF.
As any output becomes 2-3 pulled-down video except
those from the SDI OUT and HDMI OUT connectors
with “23.98P Output” (page 116) set to “23.98PsF”
Setting the Timecode
00:00
Ti
m
ecode
U
sers
Bit
TC
For
m
at:
DF
TC/UB
SET
M
ode
:
Preset
R
un
:
Rec
Run
Setting:
00:00:00:00
R
eset
TC Out :
Auto
B
B
Video formats Frame
setting
TC Format
HQ 1920/59.94i
HQ 1920/29.97P
HQ 1440/59.94i
HQ 1440/29.97P
SP 1440/59.94i
DVCAM59.94i SQ
DVCAM59.94i EC
DVCAM29.97P SQ
DVCAM29.97P EC
00 to 29 DF/NDF switchable
(Fixed to DF in
Clock mode)
HQ 1920/50i
HQ 1920/25P
HQ 1440/50i
HQ 1440/25P
SP 1440/50i
DVCAM50i SQ
DVCAM50i EC
DVCAM25P SQ
DVCAM25P EC
00 to 24 Fixed to NDF
HQ 1920/23.98P
HQ 1440/23.98P
HQ 1280/23.98P
00 to 23
1)
Fixed to NDF
2)
SP 1440/23.98P
00 to 29
3)
DF/NDF switchable
(Fixed to DF in
Clock mode)
HQ 1280/59.94P 00 to 29
(double
count)
DF/NDF switchable
(Fixed to DF in
Clock mode)
HQ 1280/50P 00 to 24
(double
count)
Fixed to NDF
HQ 1280/29.97P 00 to 29 DF/NDF switchable
(Fixed to DF in
Clock mode)
HQ 1280/25P 00 to 24 Fixed to NDF