User Manual
Table Of Contents
- Table of Contents
- Overview
- Preparations
- Recording
- Basic Operation Procedure
- Selecting the Video Format
- Switching the ND Filters
- Using the 5600K CC Filter
- Adjusting the White Balance
- Adjusting the Black Balance
- Displaying the Markers and Zebra Patterns
- Setting the Gain
- Setting the Electronic Shutter
- Adjusting the Iris
- Adjusting the Zoom
- Adjusting the Focus
- Reducing Flickers
- Setting the Time Data
- Recording Audio Signals
- Outputting the Color Bars and Reference Tone
- Recording Shot Marks
- Adding the OK Mark
- Rec Review
- Changing Functions of the Assignable Buttons
- Interval Recording
- Frame Recording
- Picture Cache Recording
- Slow & Quick Motion Recording
- Freeze Mix: Image Alignment
- Picture Profiles
- Deleting Clips
- Operating Planning Metadata
- Playback
- Thumbnail Screens
- Playing Back Clips
- Clip Operations
- Clip Operation Menus
- Basic Operations of the Clip Operation Menus
- Displaying the Detailed Information of a Clip
- Adding/Deleting the OK Mark to/from a Clip (HD Mode Only)
- Copying Clips
- Deleting Clips
- Displaying the EXPAND CLIP Screen
- Displaying the SHOT MARK Screen (HD Mode Only)
- Adding/Deleting Shot Marks (HD Mode Only)
- Changing the Index Frame (HD Mode Only)
- Dividing a Clip (HD Mode Only)
- Status Displays
- Menu Configuration and Detailed Settings
- Storing/Retrieving the Setting Data
- Connecting External Devices
- Appendixes
Picture Cache Recording
66
Recording
The Picture Cache Recording is enabled and
the CACHE REC lamp lights.
The Setting On/Off operation can be
alternatively made by using an assignable
button if you assign the Picture Cache
function to the button.
For function assignment, see “Changing
Functions of the Assignable Buttons” on page
61.
3 Set the time to cache video with “Rec
Time.”
You can select the time from among 0-2 sec,
2-4 sec, 4-6 sec, 6-8 sec, 8-10 sec, and 13-15
sec.
(The actual time to trace back to start
recording may vary within the selected time
range depending on conditions.)
4 Exit the menu.
The special recording/operation status indication
block on the screen shows “
zCACHE.” (z in
green).
Starting Picture Cache Recording
Check that the CACHE REC lamp is lit and
press the REC START/STOP button on the
handle or the grip.
Recording begins, and stored video in the cache
memory is written first to the SxS memory card.
The on-screen “
zCACHE” indication changes to
“
zREC.”
Stopping Picture Cache Recording
Press the REC START/STOP button on the
handle or the grip.
Canceling Picture Cache function
Set “Setting” of “P.Cache Rec” of the CAMERA
SET menu to “Off” or press the assignable button
to which you assigned the Picture Cache function.
Notes
• If you change the recording format, the cached
data are cleared and caching is newly started.
Therefore, data cached before you changed the
format cannot be recorded if you start Picture
Cache Recording immediately after changing
the format.
• If you start/stop Picture Cache Recording
immediately after you insert an SxS memory
card, data may not be recorded on the card.
• Picture caching starts when you activate the
Picture Cache function. Therefore, video before
the function is activated cannot be recorded
with Picture Cache Recording.
• Picture Cache Recording is invalid for external
input signal (HDV).
• As picture caching is disabled while an SxS
memory card is being accessed, such as during
playback, Rec Review, or thumbnail screen
display, Picture Cache Recording of such a
period cannot be made.
• Although you can change the “Rec Time”
setting on the menu even while recording is in
progress, any new value becomes valid in such
a case only after recording is stopped.
Performing Picture Cache
Recording
CACHE
REC
CACHE REC lamp