User Manual
Table Of Contents
- Table of Contents
- Overview
- Preparations
- Recording
- Basic Operation Procedure
- Selecting the Video Format
- Switching the ND Filters
- Using the 5600K CC Filter
- Adjusting the White Balance
- Adjusting the Black Balance
- Displaying the Markers and Zebra Patterns
- Setting the Gain
- Setting the Electronic Shutter
- Adjusting the Iris
- Adjusting the Zoom
- Adjusting the Focus
- Reducing Flickers
- Setting the Time Data
- Recording Audio Signals
- Outputting the Color Bars and Reference Tone
- Recording Shot Marks
- Adding the OK Mark
- Rec Review
- Changing Functions of the Assignable Buttons
- Interval Recording
- Frame Recording
- Picture Cache Recording
- Slow & Quick Motion Recording
- Freeze Mix: Image Alignment
- Picture Profiles
- Deleting Clips
- Operating Planning Metadata
- Playback
- Thumbnail Screens
- Playing Back Clips
- Clip Operations
- Clip Operation Menus
- Basic Operations of the Clip Operation Menus
- Displaying the Detailed Information of a Clip
- Adding/Deleting the OK Mark to/from a Clip (HD Mode Only)
- Copying Clips
- Deleting Clips
- Displaying the EXPAND CLIP Screen
- Displaying the SHOT MARK Screen (HD Mode Only)
- Adding/Deleting Shot Marks (HD Mode Only)
- Changing the Index Frame (HD Mode Only)
- Dividing a Clip (HD Mode Only)
- Status Displays
- Menu Configuration and Detailed Settings
- Storing/Retrieving the Setting Data
- Connecting External Devices
- Appendixes
Slow & Quick Motion Recording
68
Recording
In Slow & Quick Motion mode, the frame rate can
be varied by rotating the S&Q dial.
When the special recording mode indication on
the screen is active, “S&Q Motion” is displayed
on the screen and [Recording frame rate]/
[Playback frame rate] fps is displayed under
“S&Q Motion.”
Starting recording
When the preparatory settings are completed, you
can start recording.
Press the REC START/STOP button on the
handle or the grip.
Slow & Quick Motion recording begins.
Notes
• You cannot change the “On Format” and “S&Q
Ratio” settings while Slow & Quick Motion
recording is in progress. To change them, pause
the recording.
• The timecode is recorded in Rec Run mode
during Slow & Quick Motion recording (page
53).
Stopping recording
Press the REC START/STOP button on the
handle or the grip.
Slow & Quick Motion recording stops.
Note
When recording at a low-speed frame rate, it may
take time until recording stops after you press the
REC START/STOP button.
Canceling Slow & Quick Motion mode
Press the S&Q dial.
Note
Slow & Quick Motion mode is automatically
canceled when you set the power switch to OFF,
while the “On Format” and “S&Q Ratio” settings
are maintained.
Recording in Slow & Quick Motion
Mode
S&Q
CACHE
REC
S&Q dial
TCG 00:00:00:00
H
Q
1920/23.98P
S&
Q
M
otion
29/24fps
REC