4-169-963-11(1) Portable CD/DVD Player Operating Instructions US Manual de instrucciones ES DVP-FX950 © 2010 Sony Corporation
WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. The AC power cord must be changed only at a qualified service shop. Batteries or batteries installed apparatus shall not be exposed to excessive heat such as sunshine, fire or the like. CAUTION The use of optical instruments with this product will increase eye hazard.
outlet, consult an electrician for replacement of the obsolete outlet. 10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11) Only use attachments/ accessories specified by the manufacturer. 12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.
Table of Contents WARNING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Guide to Parts and Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Rotating and Folding Down the LCD Panel . . . . . . . . . . . . . . . . . . . . . 8 Preparations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Checking the Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Charging the Battery Pack . .
A LCD panel (page 8) Guide to Parts and Controls B VOL (sound volume) +/– Adjusts the volume. For more information, see the pages indicated in parentheses. Player Operate with a single touch of + or – on the player. You can also adjust the volume by sliding your finger along the touch slider. Sliding toward + from center increases volume; sliding toward – from center decreases volume. (The same operation in “LCD Mode” can be used to adjust the picture quality level. See page 18.
D DISPLAY Displays the playback information. • When playing a DVD: Displays the playback information and changes the playback mode. See page 15. • When playing a CD: Each time you press the button, the time information switches. E MENU • When playing a DVD: Displays the menu. • When playing a CD: Each time you press the button, switches Repeat Play, Random Play, and Play. • When playing a JPEG file: Displays the list of thumbnails and plays a slideshow. See page 16. RETURN Returns to the previous display.
T INPUT SELECT button (page 12) Each time you press the button, the LCD screen image switches as follows: • Disc mode (default): When playing an inserted disc. • USB mode: When playing DATA files on a connected USB device. Appears “USB” on the LCD screen when you select this mode. • Line In mode: When inputting a playback signal from connected A/V equipment. Appears “Line In” on the LCD screen when you select this mode. U Number buttons Enters the title/chapter numbers, etc.
AUDIO button Changes the audio signal. • When playing a DVD VIDEO: Each time you press the button, the language of the sound track switches. Depending on the disc, the choice of language varies. • When playing a DVD VR: Each time you press the button, the type of sound tracks recorded on a disc switches between main, sub and main/sub sound. • When playing a CD: Each time you press the button, the mode switches between stereo and monaural (left/ right).
Preparations Check that you have the following items: • Battery pack (NP-FX110) (1) • AC power adaptor (1) • Car battery adaptor (1) • Audio/video cord (mini plug × 2 y phono plug × 3) (1) • Remote (1) • Size AA (R6) batteries (2) Charge the battery pack (supplied) before using the player for the first time, or when the battery is depleted. 1 Attach the battery pack to the Preparations Checking the Accessories Charging the Battery Pack player.
2 Connect the AC power adaptor. When charging begins, the CHARGE indicator lights up in orange. INPUT SELECT POWER OFF ON HOLD PHONES A DC IN 9.5V B AUDIO IN/ OUT VIDEO IN/ OUT DC IN 9.5V To check the battery level When the player is stopped, the battery indicator is displayed. When the battery is empty, is displayed or the CHARGE indicator flashes. Set the POWER switch to “OFF,” connect the AC power adaptor, and recharge the battery.
After using the player in a car Using the Car Battery Adaptor 1 Start the engine. 2 Connect the car battery adaptor. INPUT SELECT POWER OFF ON HOLD PHONES A B AUDIO IN/ OUT VIDEO IN/ OUT Turn off the player. Disconnect the car battery adaptor. Turn off the engine. b • Do not disconnect the car battery adaptor or turn off the car engine before you turn off the player. Doing so may damage the player. • Disconnect the car battery adaptor after use.
Connecting to Other Equipment By connecting the player to your TV or other equipment, you can increase your viewing options. b • Refer to the instructions supplied with the equipment to be connected. • Before connecting, turn off the player and the equipment to be connected, then unplug from their wall sockets. z • When you play back a disc after enjoying images by “Line In” or “USB,” press INPUT SELECT repeatedly to select the disc mode. See page 7.
4 Insert the disc to be played. Place with the playback side down and push gently until it clicks. Playback Playing Discs Playback Depending on the disc, some operations may be different or restricted. Refer to the operating instructions supplied with the disc. Connect the AC power adaptor or attach the battery pack. Playback side facing down 5 Push the PUSH CLOSE on the x disc lid to shut the disc lid. X 6 Press N.
To resume playback from the point where you stopped the disc (Resume Play) When you press N again after you stop playback, the player starts playback from the point when you pressed x. z • To play from the beginning of the disc, press x twice, and press N. • When turning power on again after power off, resume play starts automatically. b • Depending on the stop point, Resume play may not start from exactly the same point. • The resume point is cleared when: – you open the disc lid. – you press INPUT SELECT.
Using the Playback Information Display • 1 • • Press DISPLAY while playing a DVD. • The current playback information appears. Example: When playing a DVD VIDEO Items Current playback information* 3 Playback While playing a DVD, you can check the current playback information. The playback information display also allows you to set a title/chapter or change sound/ subtitle, and so on. When entering the numbers, operate the number buttons on the remote. pressing ENTER.
Playing MP3 and JPEG Files You can play MP3 and JPEG files. For details on playable files, see “Playable Media” (page 27). When you set a DATA media, a list of albums appears. DATA CDs recorded in KODAK Picture CD format automatically start playing when inserted. press ENTER. Playback starts from the selected file. To go to the next or previous file Press > or .. To stop playback Press x. The display will return to the list of files. To pause playback (MP3 only) Press X.
Playing data on a USB device 3 4 5 6 7 8 9 10 11 Slide Show You can play back DATA files on a USB device. 12 Prev Press INPUT SELECT repeatedly to select “USB.” 2 Connect a USB device to the USB jack. • To go to the previous or next list of thumbnails, select “bPrev” or “NextB” at the bottom of the screen, and press ENTER. • To exit the list of thumbnails, press MENU. DIS NU RE TU RN OP TIO NS INPUT SELECT IN DC V 9.
Adjusting the Picture Size and Quality You can adjust the picture displayed on the LCD screen. VOL +/– RETURN C/X/x/c ENTER OPTIONS VOL DISPLAY MENU RETURN POWER OPTIONS CHARGE 1 Press OPTIONS. The menu display appears. 2 Press X/x to select “LCD Mode” and press ENTER. The “LCD Mode” display appears. items LCD Mode LCD Aspect : Full Backlight : 10 Contrast : 10 Hue : 0 Color : 10 Default 3 Press X/x to select items and press ENTER. • LCD Aspect: Change the picture size.
Settings and Adjustments Using the Setup Display RETURN x C/X/x/c ENTER OPTIONS VOL DISPLAY MENU RETURN 4 Select and adjust each of the following items by pressing X/x and ENTER. OPTIONS To turn off the setup display POWER CHARGE Press OPTIONS or RETURN twice. 1 Press OPTIONS when the player General Setup is in stop mode. The default settings are underlined. The menu display appears. During Resume Play, you cannot use the setup display. Press x twice to clear Resume Play, and press OPTIONS.
4:3 Pan Scan Audio Setup The default setting is underlined. 4:3 Letter Box ◆ Audio DRC (Dynamic Range Control) (DVD only) Makes the sound clear when the volume is turned down when playing a DVD that conforms to “Audio DRC.” 16:9 b Depending on the disc, “4:3 Letter Box” may be selected automatically instead of “4:3 Pan Scan” or vice versa. ◆ Angle Mark (DVD VIDEO only) Displays the angle mark when you can change the viewing angles during playback of DVDs recorded with multi-angles.
Parental Control You can limit playback of a DVD that has the parental control function. When you operate this setting, use the remote. ◆ Password (DVD VIDEO only) Set the limitation level. The lower the value, the stricter the limitation. To set the parental control, you need to set the password first. To set the parental control (limited playback) 1 Press X/x to select “Parental Control,” and press ENTER. 2 Press X/x to select the limitation level, and press ENTER.
Sound Additional Information Troubleshooting If you experience any of the following difficulties while using the player, use this troubleshooting guide to help remedy the problem before requesting repairs. Should any problem persist, consult your nearest Sony dealer. Power The power is not turned on. , Check that the AC power adaptor is connected securely (page 9). , Check that the battery pack is attached securely (page 9). , Check that the battery pack is sufficiently charged (page 10).
auto pause signal. The disc does not start playing from the beginning. , Repeat Play or Random Play is selected (page 14). , Resume play has taken effect (page 14). , The Playlist of the created disc is automatically played. To play original titles, press TOP MENU to set “Original” (page 7). Playback may take time to start. Playback freezes. , When the playback layer of a DVD+R DL/-R DL disc changes, playback may freeze. C/c does not work on menu display.
Hookup There is no picture or sound on the connected equipment. , Re-connect the connecting cord securely (page 12). , The connecting cord is damaged. , Check the setting of a connected TV or amplifier. , When “USB” or “Line In” is displayed, press INPUT SELECT repeatedly to select the disc mode (page 7). There is no picture or sound from a connected equipment. , Press INPUT SELECT to select “Line In” (page 12). USB The player does not recognize a USB device connected to the player.
On temperature increases Heat may build up inside the player during charging or if it is being used for a long time. This is not a malfunction. On placement On operation • If the player is brought directly from a cold to a warm location, or is placed in a very damp room, moisture may condense on the lenses inside the player. Should this occur, the player may not operate properly. In this case, remove the disc and leave the player for about half an hour until the moisture evaporates.
• Do not touch the metal parts, as it may cause a short and damage the adaptors, especially if touched by other metal objects. On adjusting volume Do not turn up the volume while listening to a section with very low level inputs or no audio signals. If you do, the speakers may be damaged when a peak level section is played. On cleaning discs, disc/lens cleaners Do not use cleaning discs or disc/lens cleaners (including wet or spray types). These may cause the apparatus to malfunction.
Playable Media Type Disc Logo Icon Characteristics • Commercial DVD • DVD+RWs/DVD+Rs/ DVD+R DLs in +VR mode • DVD-RWs/DVD-Rs/ DVD-R DLs in video mode DVD • Music CDs • CD-Rs/CD-RWs in music CD format CD DATA disc or USB — b • Notes about recordable media Some recordable media cannot be played on the player due to the recording quality or physical condition of the media, or the characteristics of the recording device and authoring software.
Notes on MP3 and JPEG files The player can play the following files: • MP3 files with the extension “.mp3”*1. • JPEG files with the extension “.jpg”*2. • JPEG image files that conform to the DCF (Design rule for Camera File system) image file format. • DATA CDs must be recorded according to ISO 9660 Level 1, or its extended format, Joliet. • DATA DVDs must be recorded according to UDF (Universal Disk Format). *1 Files in mp3PRO format cannot be played. *2 Files with the extension “.jpe” or “.
Specifications System Laser: Semiconductor laser Signal format system: NTSC Inputs/Outputs VIDEO (video input/output): Minijack AUDIO (audio input/output): Stereo minijack PHONES (headphones) A/B: Stereo minijack USB: USB jack Type A (For connecting USB memory) Panel size: 9 inches wide (diagonal) Driving system: TFT active matrix Resolution: 800 × 480 (effective pixel rate: more than 99.99%) General Power requirements: DC 9.5 V (AC power Adaptor/Car battery adaptor) DC 7.
Index Numerics Screen Saver 14, 20 Setup 19 Slide Show 17 Subtitle 8, 20 16:9 19 4:3 Letter Box 19 4:3 Pan Scan 19 T A U Angle Mark 7, 20 Audio 8, 20 Audio DRC 20 Audio Setup 20 C CD 13, 27 Charging time and playing time 10 D DATA 16, 27 Disc Menu 20 DVD 13, 27 G General Setup 19 J JPEG 16, 28 L Language Setup 20 LCD Aspect 18 LCD Mode 18 M MP3 16, 28 O OSD (On-Screen Display) 20 P Parental Control 21 Password 21 Playable Media 27 Playback Information Display 15 R Random Play 14 Region co
Índice Este manual explica los preparativos y el funcionamiento básico del reproductor portátil de CD/DVD. Para obtener más información, consulte el Manual de Instrucciones en inglés. Preparativos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Control de accesorios . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Carga de la batería . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Preparativos Compruebe que dispone de los siguientes elementos: • Batería (NP-FX110) (1) • Adaptador de alimentación de CA (1) • Adaptador para batería de automóvil (1) • Cable de audio/video (clavija mini × 2 y clavija fono × 3) (1) • Control remoto (1) • Pilas R6 (tamaño AA) (2) Cargue la batería (suministrada) antes de utilizar el reproductor por primera vez o cuando la batería esté agotada. 1 Sujete la batería al reproductor.
2 Conecte el adaptador de alimentación de CA. Cuando comienza el proceso de carga, se enciende la luz naranja del indicador CHARGE. Tiempo de carga y tiempo de reproducción Tiempo de carga: aproximadamente 6 horas Tiempo de reproducción: aproximadamente 7.5 horas INPUT SELECT POWER OFF ON HOLD PHONES A DC IN 9.5V B AUDIO IN/ OUT VIDEO IN/ OUT Los tiempos indicados dependen de las siguientes condiciones: DC IN 9.
Uso del adaptador para batería de automóvil • Use el adaptador para batería de automóvil con el motor del vehículo en funcionamiento. Si se utiliza con el motor del vehículo apagado, la batería del automóvil puede agotarse. Después de usar el reproductor en el vehículo 1 2 Apague el reproductor. 1 Arranque el motor. 2 Conecte el adaptador para 3 Apague el motor. batería de automóvil. INPUT SELECT POWER OFF ON HOLD PHONES A B AUDIO IN/ OUT VIDEO IN/ OUT DC IN 9.5V DC IN 9.
4 Inserte el disco a reproducir. Ubíquelo con la cara de reproducción hacia abajo y empuje suavemente hasta que se ajuste con un clic. Reproducción Reproducción de discos De acuerdo con el disco, algunas operaciones pueden ser diferentes o estar restringidas. Consulte las instrucciones de operación proporcionadas con el disco. Conecte el adaptador de alimentación de CA o la batería. La cara de reproducción debe mirar hacia abajo 5 Presione el PUSH CLOSE en la x X tapa del disco para cerrarla.
Para reanudar la reproducción desde donde detuvo el disco (Reanudar reproducción) Cuando vuelve a presionar N después de detener la reproducción, el reproductor comienza con la reproducción desde donde presionó x. z • Para iniciar la reproducción desde el principio del disco, presione x dos veces y luego N. • Al encender nuevamente el reproductor después de apagarlo, la reproducción se reanuda automáticamente.
Para Operación Reproducir el CD en retroceso o avance rápido (Reproducción rápida) Presione C/c repetidamente en el reproductor para seleccionar la velocidad. * DVD VIDEO solamente Rotación y plegado del panel LCD Abra el panel LCD en la posición vertical y luego rótelo lentamente 180 grados siguiendo la dirección que indica la flecha (en sentido de las agujas del reloj). Después de rotar el panel LCD 180 grados en sentido horario, empuje el panel LCD hacia abajo sobre la carcasa del reproductor.
4-169-963-11(1) Sony Corporation Printed in China
