User Manual
Table Of Contents
- Read this first
- About upgrade licenses and firmware versions
- Identifying parts and controls
- Screen indicators
- Table of Contents
- Getting Started
- Step 1: Checking supplied items
- Step 2: Using a battery pack or AC Adapter
- Step 3: Attaching the lens
- Step 4: Attaching the handle, accessory shoe, microphone, LCD screen, and grip
- Step 5: Turning on the camcorder and setting the date and time
- Step 6: Adjusting the LCD screen and viewfinder
- Step 7: Adjusting the angle of the grip
- Step 8: Inserting a memory card
- Recording
- Recording
- Adjusting the focus
- Changing the recording setting/image size
- Adjusting the brightness
- Adjusting the color tone
- High Dynamic Range (HDR)
- Using Direct Menu
- Slow & Quick Motion/Super Slow Motion recording
- Slow-Motion recording at High Frame Rate (HFR)
- Recording in RAW format using a RAW recorder (sold separately)
- MPEG HD recording
- Preparing to record in MPEG HD
- Recording in MPEG HD
- Slow & Quick Motion Recording
- Super Slow Motion Recording
- Playback in MPEG HD
- MPEG HD output formats
- Recommended memory cards
- Estimated recording time of movies
- Proxy recording supported formats
- Streaming supported formats
- About the MPEG format
- Specifications
- Audio setup
- Assigning functions to the ASSIGN buttons/dial
- Using the Wi-Fi function
- What you can do with the Wi-Fi function of the camcorder
- Downloading “Content Browser Mobile”
- Connecting the camcorder to an Android smartphone equipped with the NFC function using One-touch connection
- Using a smartphone as a camcorder remote control
- Connecting without using the NFC function (Android)
- Connecting without using the NFC function (iPhone/iPad)
- Using network functions
- Useful functions
- Selecting suitable settings automatically (full auto mode setting)
- Customizing the picture quality (Picture profile)
- Using the gamma display assist function
- Setting time data
- Preventing accidental operation (HOLD switch)
- Reviewing the most recently recorded scene (Last Scene Review)
- Inverting the LCD screen display
- GPS function
- Playback
- Editing
- Using the Menu
- Troubleshooting
- Additional Information
37
Getting Started
1 Move the grip rotate lever to the
position shown below, and turn
the grip while pressing the lever.
2 Release the grip rotate lever when
the grip is near the desired
position.
3 Move the grip slightly until it
clicks into the locked position.
When the grip is locked, move the grip
rotate lever back to its original position.
b Notes
• When finished, always check that the grip is
locked in position.
• The angle cannot be adjusted beyond the
adjustment range. Do not use force to try and
rotate the grip.
The recommended way of holding and
operating the grip is shown below.
Using the ASSIGN5/Fn button and
multi-selector
AOperate the ASSIGN dial using your index
finger.
BOperate the multi-selector and ASSIGN5
button using your thumb.
CHold the grip firmly using your middle
finger, ring finger, and little finger.
Zooming in/out
AOperate the zoom lever using your index
finger and middle finger.
BHold the grip firmly using your thumb.
Holding the grip (recommended
method)
Continued ,