User Manual

156
Wi-Fi Setting
Makes settings for
wireless LAN connection.
Notes
• The IFU-WLM3 USB
Wireless LAN Module is
required.
• Menus other than “Wi-
Fi” and “Wi-Fi Remote”
are not used when using
the CBK-WA101
Wireless Adapter.
• This item is disabled
(grayed out) during
recording and play.
For details about wireless
LAN connection, see
“Connecting the
Camcorder to Devices
using the IFU-WLM3 USB
Wireless LAN Module”
(page 81).
Scan Networks Execute/Cancel When “Wi-Fi” is set to “Enable,” scan
the available network connection.
SSID Network name Sets the network name of up to 32
characters.
Network Type Infra/Adhoc Selects the connection mode.
Infra: Infrastructure mode
Adhoc: Ad hoc mode
Ch 1 to 11 When “Network Type” is set to
“Adhoc,” set the wireless channel.
Authentication Open/Shared/WPA/
WPA2
Selects the network authentication.
Open: Open system authentication
Shared: Shared key authentication
WPA: WPA (Wi-Fi Protected Access)
authentication
WPA2: WPA2 (Wi-Fi Protected
Access 2) authentication when
“Network Type” is set to “Infra”
Encryption Disable/WEP/TKIP/
AES
Selects whether to apply data
encryption and the type of data
encryption.
Disable: Do not apply data encryption.
WEP: Apply WEP (Wired Equivalent
Privacy) when “Authentication” is
set to “Open” or “Shared”
TKIP: Apply TKIP (Temporal Key
Integrity Protocol) when
“Authentication” is set to “WPA”
or “WPA2”
AES: Apply AES (Advanced
Encryption Standard) when
“Authentication” is set to “WPA”
or “WPA2”
WEP Key Index 1/2/3/4 When “Encryption” is “WEP,” selects
the key index.
Input Select When “Encryption” is
set to “WEP”
ASCII5,
ASCII13,
HEX10,
HEX26
When “Encryption” is
set to “TKIP” or
“AES”
ASCII8-63,
HEX64
Selects the input format depending on
the network key (or security key).
ASCII5: Five characters ASCII format
ASCII13: 13 characters ASCII format
HEX10: 10 hexadecimal digits
HEX26: 26 hexadecimal digits
ASCII8-63: 8 to 63 characters ASCII
8-bit format
HEX64: 64 hexadecimal digits
Key Sets the network key (or security key).
Set Enables settings for “Wi-Fi Setting”
when “Wi-Fi” is set to “Enable”
(execute using Execute).
MAINTENANCE
Item Sub-item Setting Description