User Manual
Table Of Contents
- Table of Contents
- Foreword
- Chapter 1: Overview
- Chapter 2: Preparations
- Chapter 3: Adjustments and Settings
- Chapter 4: Shooting
- Handling SxS Memory Cards
- Using a Media Adaptor
- Handling USB Flash Drives
- Operating via the REMOTE Connector
- Functions That Can Be Controlled from the RM-B170/B750
- Functions That Can Be Controlled from the RCP-1001/1501
- Connecting the Camcorder to Devices using the IFU-WLM3 USB Wireless LAN Module
- Connecting the Camcorder to Devices using the CBK-WA101 Wireless Adapter
- Basic Operations
- Advanced Operations
- Recording Shot Marks
- Setting OK Marks
- Recording Cached Video (Picture Cache Rec Function)
- Recording Time-lapse Video (Interval Rec Function)
- Shooting Stop Motion Animations (Frame Rec Function)
- Shooting with Slow & Quick Motion
- Recording with the Clip Continuous Rec Function
- Recording to 2 Slots Simultaneously (2-Slot Simul Rec Function)
- Framing Shots with the Freeze Mix Function
- Planning Metadata Operations
- Chapter 5: Clip Operations
- Clip Playback
- Thumbnail Operations
- THUMBNAIL Menu Configuration
- Basic THUMBNAIL Menu Operations
- Changing the Thumbnail Screen Type
- Displaying Clip Properties
- Adding/Deleting a Flag (UDF, exFAT Modes)
- Adding/Deleting the OK Mark (FAT-HD Mode Only)
- Copying Clips
- Deleting Clips
- Displaying the Expand Thumbnail Screen (UDF/exFAT/FAT-HD Mode only)
- Displaying the Shot Mark Thumbnail Screen (UDF/exFAT/FAT-HD Mode Only)
- Adding and Deleting Shot Marks (UDF/exFAT/FAT-HD Mode Only)
- Changing Clip Index Pictures (UDF/exFAT/FAT-HD Mode Only)
- Dividing Clips (FAT-HD Mode Only)
- Chapter 6: Menu and Detailed Settings
- Chapter 7: Saving and Loading User Setting Data
- Chapter 8: Connecting External Devices
- Chapter 9: Maintenance
- Appendix
- Important Notes on Operation
- Exchanging the Battery of the Internal Clock
- Output Formats and Limitations
- Output Signals and Operation Restrictions When a Camcorder System is Configured (in HD Mode Only)
- Software Downloads
- Specifications
- Peripheral Devices and Accessories
- About License
- About Bitmap Fonts
- About OpenSSL
- About JQuery,Sizzle.js
- Index
75
Black
Gamma
Black Gamma On/Off Turns black gamma correction on or
off.
Yes Yes
Gamma Level –99 to ±0 to +99 Specifies the master black gamma
level.
Yes
b)
Ye s
Range Low/L.Mid/
H.Mid/High
Selects the black gamma correction
effective range.
Yes
b)
Yes
b)
Knee Knee On/Off Turns knee correction on or off. Yes Yes
b)
Knee Point 50% to 90.0% to
109% (1% steps)
Specifies the knee point. Yes Yes
b)
Knee Slope –99 to ±0 to +99 Specifies the knee slope. Yes
b)
Yes
b)
Knee Saturation On/Off Turns the knee saturation function
on or off.
Yes
b)
Yes
b)
Knee Saturation
Level
–99 to ±0 to +99 Specifies the knee saturation level. Yes
b)
Yes
b)
White Clip White Clip On/Off Turns white clipping adjustment on
or off (Off = fixed as 109%).
Yes
b)
Yes
b)
White Clip
Level
Country is set to
other than PAL
Area
90.0% to
108.0% to
109.0%
Specifies the white clip level. Yes
b)
Yes
b)
Country is set to
PAL Area
90.0% to
105.0% to
109.0%
Detail(HD
mode)/
Detail(SD
mode)
Detail On/Off Turns detail adjustment on or off. Yes Yes
b)
Level –99 to ±0 to +99 Specifies the detail level. Yes Yes
H/V Ratio –99 to ±0 to +99 Specifies the mix ratio between the
H detail level and the V detail level.
Yes
b)
Yes
b)
Crispening –99 to ±0 to +99 Specifies the crispening level. Yes
b)
Yes
b)
Level Depend On/Off Turns the level dependence
adjustment function on/off.
Yes
b)
Yes
b)
Level Depend
Level
–99 to ±0 to +99 Specifies the level dependence level. Yes
b)
Yes
b)
Frequency –99 to ±0 to +99 Specifies the central frequency for H
detail signal. Larger values give
finer details.
Yes
b)
Yes
b)
Knee Aperture On/Off Turns the linear knee aperture
function on or off.
Yes
b)
Yes
b)
Knee Aperture
Level
–99 to ±0 to +99 Specifies the knee aperture level. Yes
b)
Yes
b)
Limit –99 to ±0 to +99 Specifies the detail limiter values for
both the white-side and black-side
direction.
Yes
b)
Yes
b)
White Limit –99 to ±0 to +99 Specifies the white-side detail
limiter value.
Yes
b)
Yes
b)
Black Limit –99 to ±0 to +99 Specifies the black-side detail
limiter value.
Yes
b)
Yes
b)
Item Sub-item Setting Description RM-B170 RM-B750