User Manual

94
Knee
Knee correction
settings
Setting
On / Off
Turns the knee correction function on/off.
(Enabled when Gamma >Gamma Category is set to STD)
Auto Knee
On / Off
Turns the auto knee function on/off.
Point
75% to 109% (90%)
Sets the knee point.
Slope
–99 to +99 (±0)
Sets the knee slope.
Knee Saturation
On / Off
Enables/disables knee saturation adjustment (adjusts coloring
above the knee point).
Knee Saturation Level
–99 to +99 (±0)
Sets the level for adjusting the coloring above the knee point
(knee saturation).
White Clip
White clip
adjustment settings
Setting
On / Off
Turns white clipping adjustment function on/off.
Level
90.0% to 109.0%
Sets the white clip level.
Detail(QFHD)
Detail adjustment
settings (QFHD)
Manual Setting
On / Off
Turns the detail adjustment function on/off.
Level
–99 to +99 (±0)
Sets the detail level.
Frequency
–99 to +99 (±0)
Sets the center frequency of the detail (detail thickness). The
detail is thinner the higher the center frequency, and thicker
the lower the center frequency.
Knee Aperture
On / Off
Turns the knee aperture correction function on/off.
Knee Aperture Level
–99 to +99 (±0)
Sets the knee aperture level.
White Limit
–99 to +99 (±0)
Sets the white-side detail limiter.
Black Limit
–99 to +99 (±0)
Sets the black-side detail limiter.
V Detail Creation
NAM / Y / G / G+R
Sets the signal source for creating the V detail to NAM (G or
R, whichever is higher), Y, G, or G+R.
Paint
Item Sub-items and Settings Description