User Manual

96
Aperture
Aperture
correction settings
Setting
On / Off
Enables/disables aperture correction (processing that
improves resolution by adding a high-frequency aperture
signal to the video signal to correct deterioration due to high-
frequency characteristics).
Level
–99 to +99 (±0)
Sets the aperture correction level.
Matrix
Matrix correction
settings
Setting
On / Off
Turns the matrix correction function on/off.
Adaptive Matrix
On / Off
Turns the adaptive matrix function on/off.
Preset Matrix
On / Off
Turns the preset matrix function on/off.
Preset Select
1:SMPTE 240M /
2:ITU-709 / 3:SMPTE Wide /
4:NTSC / 5:EBU / 6:PAL
Selects a preset matrix.
Maintenance
Maintenance
settings
Test Saw
On / Off
Turns the test signal on/off.
Paint
Item Sub-items and Settings Description
Audio menu
Audio
Item Sub-items and Settings Description
Audio Input
Audio input
settings
CH2 EXT Input Select
INPUT1 / INPUT2
Selects the input for recording on channel 2. Enabled only
when the EXT audio source is selected.
CH3 Input Select
Off / INPUT1 / Internal MIC /
Shoe CH1
Selects the input for recording on channel 3.
CH4 Input Select
Off / INPUT1 / INPUT2 /
Internal MIC / Shoe CH2
Selects the input for recording on channel 4.
INPUT1 MIC Reference
–80dB / –70dB / –60dB /
–50dB / –40dB / –30dB
Selects the reference input level when the INPUT1 switch is
set to MIC.
INPUT2 MIC Reference
–80dB / –70dB / –60dB /
–50dB / –40dB / –30dB
Selects the reference input level when the INPUT2 switch is
set to MIC.
Internal MIC Level
–12dB / –6dB / 0dB / +6dB /
+12dB
Selects the level of the internal microphone. You can select the
level regardless of the AUDIO LEVEL dial setting.
Line Input Reference
+4dB / 0dB / –3dB / EBUL
Selects the reference input level when the INPUT1/INPUT2
switch is set to LINE.
Reference Level
–20dB / –18dB / –16dB /
–12dB / EBUL
Selects the recording level of the 1 kHz reference tone signal.
CH1 Wind Filter
On / Off
Turns the wind noise reduction filter for recording on channel
1 on/off.