User Manual

141
1)“Media(B)” for the card in slot B.
The following caution and operation messages may appear in the center of the screen. Follow the
instructions provided to resolve the issue.
Clips Near Full Intermittent Flashing The number of additional clips that can be recorded
on the SxS memory card is getting low.
Replace at the earliest convenience.
Clips Full Continuous High-speed
flashing
The maximum number of clips that can be recorded
on an SxS memory card has been reached.
Recording or copying more clips is not possible.
Replace immediately.
Last Clip Recording Intermittent Flashing The clip currently recording is the last clip that can
be recorded, as the maximum number of clips has
been reached.
Prepare a new SxS memory card.
Media(A) Near Full
1)
Intermittent Flashing When using the Simul Rec function
Media(A) Full
1)
Continuous High-speed
flashing
When using the Simul Rec function
Media(A) Clips Near Full
1)
Intermittent Flashing When using the Simul Rec function
Media(A) Clips Full
1)
Continuous High-speed
flashing
When using the Simul Rec function
Media(A) Last Clip Rec
1)
Intermittent Flashing When using the Simul Rec function
Warning indication on
LCD/viewfinder
Warning
sound
Recording/
tally lamp
Cause and Solution
Caution and operation messages
Display message Cause and Solution
Battery Error
Please Change Battery
An error was detected in the battery pack.
Replace with a normal battery pack.
Unknown Media(A)
1)
Please Change
A memory card that has been partitioned or a memory card containing
more clips that can be handled by the camcorder was inserted.
The card cannot be used in the camcorder, and must be replaced.
Cannot Use Media(A)
1)
Unsupported File System
A card using a different file system or an unformatted card was inserted.
The card cannot be used in the camcorder, and must be replaced or
formatted using the camcorder.
Media Error
Media(A) Needs to be Restored
1)
An error occurred on the memory card, and the card must be restored.
Restore the memory card.
Media Error
Cannot Record to Media(A)
1)
The memory card may be damaged, and can no longer be used for
recording.
Playback may be possible, so making a copy and replacing the memory
card is recommended.
Media Error
Cannot Use Media(A)
1)
The memory card may be damaged, and can no longer be used for
recording or playback.
The card cannot be used in the camcorder, and must be replaced.
Media(A) Error
1)
Recording Halted
Playback Halted
Recording and playback was stopped because an error occurred while
using the memory card.
If the problem persists, replace the memory card.
Media Reached Rewriting Limit
Change Media(A)
1)
The memory card has reached the end of its life.
Make a backup, and replace the card immediately. If you continue using
the card, the card may not be able to record or play.
For details, refer to the operating instructions for the memory card.