User Manual

40
Notes
• Rec Review is not supported if the video format is
changed after recording a clip.
• The setup menus cannot be operated during Rec
Review.
• Rec Review is not available when the thumbnail screen
displays the filtered clip thumbnail screen.
There are ten assignable buttons (page 7) on the
camcorder to which you can assign functions.
Changing functions
Use Assignable Button (page 121) in the System
menu.
You can view the assigned functions on the
Assignable Button Status screen (page 15).
Default assigned functions
Button 1 Zebra
Button 2 Peaking
Button 3 Video Signal Monitor
Button 4 Network Client Mode
Button 5 Off
Button 6 Off
Button 7 Direct Menu
Button 8 Focus Magnifier
Button 9 Off
Button 10 Push Auto Iris
Assignable functions
For details about each function, see page 121.
•Off
• Push AF/Push MF
• Face Detection AF
• ND Filter Position
• Auto ND Filter
• Push Auto ND
• Push Auto Iris
• Turbo Gain
•AGC
•Shutter
• Auto Exposure Level
• Spotlight
• Backlight
• Flash Band Reduce
• Digital Extender ×2
• Handle Zoom
• Color Bars
• Preset White Select
•ATW
•ATW Hold
• Marker
•Zebra
• Peaking
• Video Signal Monitor
• Focus Magnifier
•Lens Info
•LCD/VF Adjust
• VF Mode
• Gamma Display Assist
•Display
•Rec
• S&Q Motion
• Clip Continuous Rec
• Picture Cache Rec
• Proxy Rec Start/Stop
• Rec Review
• Last Clip Delete
• Thumbnail
• Shot Mark1
• Shot Mark2
•Clip Flag OK
•Clip Flag NG
• Clip Flag Keep
•NFC
• Network Client Mode
•Streaming
• Auto Upload (Proxy)
• Direct Menu
• User Menu
•Menu
You can automatically record images at set
intervals by setting the number of frames per take
(Number of Frames) and the shooting interval
(Interval Time).
This function is an effective way to shoot slow-
moving subjects.
Assignable buttons
Interval recording (Interval Rec)