Warning RM-03 English To prevent fire or shock hazard, do not expose the unit to rain or moisture, To avoid electrical shock, do not o cabinet. Refer servicing to qualifier the personnel only. ASK OF ELECTRIC SHOCK 50 NOT FEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOOK, DO NOT REMOVE COVER (OR BACK), HO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
For the customers in the U.S.A. INFORMATION This equipment generates and uses radio frequency energy and if not installed and used properly, that is, in strict accordance with the manufacturer's instructions, may cause interference to radio and television reception.
NOTICE FOR THE CUSTOMERS IN THE UNITED KINGDOM IMPORTANT The wires in this mains lead are colored in accordance with the following code: Bite: Neutral Brown: Live As the colors of the wires in fie mains lead of this apparatus may not correspond with ihe colored markings identifying the germinal in your plug proceed as folios: The wire which is colored blue must be connected to the terminate which is marked with the letter N or colored black.
bie of Contents introduction Quinine and Features Precautions Location and Friction of Controls . o Operations Remote Contort Operations Preparations and Connections .
Outline and Features The RM-KID is the remote control, dimer, and digital outputting adapter kit for the digital audio taps-corer TC D-D3. W et 03K connected to TC D-D3.
| On satiety +Before connecting the RM R-D3 remote control adapter 1o the wall pullet, check to be sure that the uni's operating voltage is the same as your local parer supply (see “Specifications™}, Use only the supplied power cord and no other type. Ware purchaser Operating voltage United States, Canada 120V AC, 80Hz United Kingdom 240V AC, Shiraz Continental European nutritious. 220/230V AC, 50Hz »The nameplate indicating operating voltage.
| ovation and Function of Control Remote Control Adapter RM R-D3 {Front} Refer 1o the pages indicated in @ for details. Remote sensor INPUT SELECT selector P06 Selects the input signal of the T CO-D3 {either digital or analog). TIMER selector § POWER switch and Indicator o operate the TC D-U3 by ram ate control, tum to either STANDBY o ON. 7o use the outputting Antarctica o 1o meek characterized recording or playback, 1 0 ON.
i i (Rear) DIGITAL INPUT selector B0€ COAXIAL INPUT @ (coaxial digital input) connector COAXIAL OUTPUT {coaxial digital output) connector @ Power supply cord Optical outputting connectors @ OPTICAL OUTPUT (optical digital output) connector OPTICAL INPUT {optical digital input) connector Special connector *Whichever position is selected on the DIGITAL INPUT selector, the signal is output simultaneously trim the OPTICAL OUTPUT and COAXIAL OUTPUT connectors
Location and Function of Control Remote Commander R MT-D3 START ID AUTO/ WRITE/ COUNTER MODE/RESET ERASE/ and other RENUMBER ‘operation buttons @ buttons {for writing or (nave the same erasing a start 1D function as the TG and renumbering D3 buttons. High program numbers} sped cue/raview . during playback Numeric buttons/CLEAR! ok e MUSIC SCAN be made.
Remote Control Operations You can operate the TC D-D3 by remote contort when the RM R-D3 15 connected 1o the tape-corer’ Preparations and Connections 2 To a wall outlet ’j AC power adapter (supplied with the TC D-D3) I T @ Tum e TC-b3s | power switch to on DTo the REMOTE DIGITAL 1O connector Power source of the TED-03 Use the supplied AC power adapter especially when making cultivated recording of playback.
Remote Control Operations Power source of the commander To install batteries insert two AA (R6) batteries. Battery replacement As the batteries become weak, the maximum control distance of commander lessens. When this effect becomes noticeable, pert he two batteries with new ones.
Direct Selecting When you have marked the beginning of each defection on your tape with the program number, you can play the desired selection simply by entering the number on the remote commander. {Example: direct selecting and playback of the 3rd selection) Operation Result During playback of stop | Display window of the, TC D-D3 mode e ST 1 Press the 3 button, L Flashing 2 Press the MUSIC SCAN or b button. Searching the 3rd selection (‘E{v Erie] g Flashing ate Program numbers scanned.
Remote Control Operations l Music Scanning You can listen to the first 8 seconds of each selection successive This MUSIC SCAN unction allows you to check the recorded selections, Operation Result Outing playback or stop mode 1 Press the MUSIC BAN button. Display window of the TC D-I33 2 Press the 14«4 or Hutton.
Record Muting While recording, you can make a sound-muted period {a pried on which a recording has been made but with has sound muted) between the selections. The sound-muted periods are useful during after playback or editing of the gate. Operation Result During cording Display window of TC D-D3 1 Press the O button when you want to record the sound muted. Flashing A four-secant sound-muted period is automatically recorded on the tape.
Remote Control Operations CD Synchronized Recording By using the commander together with a remote-control Sony CD player, you can start recording on the TC D-D3 and playback of the CO player simultaneously. Operation Result 1 Turn on the power of the TC 0-U3 and insert a cassette. 2 set a compact disc in the CD player. 3 Press CD SYNCHRONY STANDBY on the commander. The CD player enters pause mode, ready for playback. The TC D-D3 also enters pause mode, ready for retarding.
Wei ting the Start ID You can write the start i) with the commander in the same way as you do with the TC D-D3, To write the start 1D during recording Press the WRITE button at whatever point in the retarding you wish 10 mark with a start ID. > Start 1D is written. To write the start 1D during playback 1 Press the WRITE button at the point you wish to write a start 10 -+ The TC D-DS plays back the several-seconds period beginning at the designated point—Rehearsal function.
Digital Input and Output Connector The RM R-D3 has both optical and coaxial digital outputting connectors. You can enjoy recording and playback via these digit connectors by connecting your unit to other digital audio equip me Connecting o the TC D-D3 @) Tum the POWER switch 10 ON, &St the DIGITAL INPUT selector to: OPTICAL.
Connecting 1o other audio equipment GO player, DAT deck, digital ; POCONO, COP-10, amplifier, and other COP-15 ot supplied) ‘equipment having | ey e OPTICAL digital ’ = outputting o oo To digital output To Optical A A To OPTICAL INPUT T Y out Put rear of o the R MA-D3 COAXIAL ) To digital OUTPUT | 18D player, DAT o digital output deck, digital :‘j‘ > | To digital VAC-13, VAC-28 | COAXIAL digital input {not supplied} | outputting | connectors | 42 the flow of the digital signals When recording the signal via
Timer-Activated Recording and Playback To make a dimer-activated recording of playback, connect the RMR D3 to an audio dimer, not supplied. o timer | 0 a wall outlet " AC power | adapter DIGITAL INPUT selector Note: Be sure to connect the AG power adapter of the TO-03 o2 wall outset, Never connect it t an audio timer 3 Turn on the power of the TED-03. @ Tum the POWER switch of the R MA-D3 to ON. @Set the TIMER selector to REC for timer-activated recording or o PLAY for timer-activated playback.
The power source of the TC D-D3 Be sure that the TED-03 is powered by the supervened AC power adapter. If you use rechargeable batteries, the TO-D3's auto power off function will be activated and the TC D-D3 wilt automatically auras oft during standby made. Power source of an FM tuner being used as a sound source for timer-activated recording We recommend you {6 plug the parer cord of the FM tuner into the audio timer.