User's Manual

Appendix

Specifications

TALLY/CONTACT connector (connector plug,

9-pin)

Using the VISCA RS-422 connector

plug

Grasp both ends of the VISCA RS-422 connector

plug and pull it out as shown in the illustration.

Insert a wire (AWG Nos. 28 to 18) into the desired

wire opening on the plug, and tighten the screw for

that wire using a flat-head screwdriver.

Insert the VISCA RS-422 connector plug into the

VISCA RS-422 connector.

Notes

• In order to stabilize the voltage level of the signal,

connect both ends to GND.

• The maximum connection distance with the VISCA

RS-422 connection is approximately 1,200 m (3,937

feet).

Pin No. Function

1 CAMERA1

2 CAMERA2

3 CAMERA3

4 CAMERA4

5 CAMERA5

6 CAMERA6

7 CAMERA7

8 GND

9 GND

TALLY/CONTACT

Wire

Flat-head screwdriver