User's Manual

ManualsBrandsSony ManualsCamcorder & Camera PeripheralsIP Remote Controller for BRC Cameras

Overview

Location and Function of Parts

R SHIFT button and indicators

When pressing the SHIFT button, the lower

indicator lights and the GROUP/POSITION

buttons can be used for group/position numbers 9 to

16. If you release the SHIFT button, the upper

indicator will light and the GROUP/POSITION

buttons can be used for group/position numbers 1 to

S SELECT button

The camera group number can be changed by

pressing the GROUP/POSITION button while this

button is pressed. To select camera group numbers

9 to 16, press and hold the SHIFT button (the lower

indicator lights).

The SELECT button works only for the LAN

connection.

T POWER button

Press this button to light the CAMERA button(s)

corresponding to the status of the connected

camera(s).

Ye ll ow : The power of the camera is on.

Green: The camera is in standby mode.

Off: No camera is connected.

Hold down this button and press CAMERA buttons

1 to 7 to turn on/off the power of the camera

corresponding to the pressed button.

U CAMERA buttons

Press one of the buttons to select the camera from

among those connected. The selected CAMERA

button lights in yellow.

V GROUP/POSITION buttons

You can store various camera settings such as the

pan, tilt and zoom positions to the memory of the

camera corresponding to each GROUP/POSITION

button, and load the settings in the memory.

This buttons are also used for selecting the camera

group number when connecting over a LAN.

Rear

W MODE selector

Select the position corresponding to the camera to

be connected.

Note

Use positions 7 to 9, A, and B when all the

connected cameras are of the same model. In other

cases, use position 0.

X LAN connector (RJ-45 8-pin)

For LAN connection.

Connect a LAN HUB (10BASE-T/100BASE-TX),

using a LAN cable (category 5 or higher).

When a link is established, the green indicator

lights, and it flashes during communication. While

connected with 100BASE-TX, the yellow indicator

also lights.

Switch position Camera mode

0 Automatically selected (default)

1 Not used

2 Not used

3 Not used

4 Not used

5 Not used

6 Not used

7 BRC-Z700

8 BRC-Z330

9 BRC-H900

A BRC-X1000/H800/H780

B BRC-X400/X401, SRG-X400/

201M2/X120/HD1M2

C Not used

D Not used

E Not used

F Not used

MODE

VISCA

1919

RS-422

TALLY/CONTACT

RS-232C

DC 12V

LAN

;