User's Manual

9GB
E:\DATA\4577101111\4577101111RSXGS9UC\01GB-RSXGS9UC\040CD.fm masterpage: Right
RSX-GS9
4-577-101-11(1)
Resetting the Unit
Before operating the unit for the first time, after
replacing the car battery, or changing the
connections, you must reset the unit.
Notes
ˎ Pressing the reset button will erase the clock setting
and some stored contents.
ˎ No sound will be output for about 1 minute until the
reset of the unit is complete.
Setting the Clock
Use the remote commander to perform the
following.
1 Press and hold MENU, press a or { to
select [General], then press ENTER.
2 Press a or { to select [Clock Adjust],
then press ENTER.
The hour indication flashes.
3 Press a or { to set the hour and minute.
To move the digital indication, press R or C.
4 After setting the minute, press and hold
MENU.
The setup is complete and the clock starts.
To display the clock
Press DSPL.
Preparing a BLUETOOTH Device
You can enjoy music, or perform handsfree calling
depending on the BLUETOOTH compatible device
such as a smartphone, cellular phone and audio
device (hereafter “BLUETOOTH device” if not
otherwise specified). For details on connecting,
refer to the operating instructions supplied with the
device.
There are two ways for connecting the BLUETOOTH
device:
ˋ One-touch connection for the NFC compatible
BLUETOOTH device.
ˋ Manual connection.
Before connecting the device, turn down the
volume of this unit; otherwise, loud sound may
result.
By touching the N-Mark on the unit with an NFC*
compatible smartphone, the unit is paired and
connected with the smartphone automatically.
* NFC (Near Field Communication) is a technology
enabling short-range wireless communication
between various devices, such as mobile phones and
IC tags. Thanks to the NFC function, data
communication can be achieved easily just by
touching the relevant symbol or designated location
on NFC compatible devices.
For a smartphone with Android OS 4.0 or lower
installed, downloading the app “NFC Easy Connect”
available at Google Play™ is required. The app may
not be downloadable in some countries/regions.
1 Press and hold ā on the unit for more
than 2 seconds.
Alternatively, press and hold MENU on the
remote commander, select [BT setting] q [BT
Signal], then press ENTER.
The BLUETOOTH indicator on the unit flashes
(while the unit is in pairing standby mode).
2 Activate the NFC function on the
smartphone.
For details, refer to the operating instructions
supplied with the smartphone.
3 Touch the N-Mark part of the unit with
the N-Mark part of the smartphone.
Make sure the BLUETOOTH indicator on the unit
lights up.
To disconnect by One touch
Touch the N-Mark part of the unit with the N-Mark
part of the smartphone again.
Notes
ˎ When making the connection, handle the
smartphone carefully to prevent scratches.
ˎ One touch connection is not possible when the unit is
already connected to another NFC compatible device.
In this case, disconnect the other device, and make
connection with the smartphone again.
Getting Started
Connecting with a Smartphone by One
touch (NFC)
010COV.book Page 9 Thursday, July 2, 2015 2:07 PM