Operating Instructions
Table Of Contents
-  WARNING
- Compliance Information
- Before first use
- Connection/Installation
- Preparing the app and the batteries
- Mounting the RTK kit on the aircraft and assembling the aircraft
- Installing the base station
- Preparing the remote controller and the aircraft
- Preparing a camera
- Mounting the gimbal on the aircraft
- Mounting a camera on the gimbal (when using the GBL-PX1)
- Mounting a camera on the gimbal (when using the GBL-T3)
- Settings/Operation
- Storing
- Flight Information and Specifications
- Compliance Information
14
[2] Removing the connection hub from the aircraft
1 Remove the cables from the aircraft.
Remove the cables from the connection hub on the aircraft.
Power cable
(aircraft — gimbal)
USB Type-C® cable
(aircraft — gimbal)
Control cable
(aircraft — gimbal)
Front of aircraft
Remove the control cable (aircraft — gimbal) from the control port.
Rear of aircraft
Remove the power cable (aircraft — gimbal) from the POWER port.
Remove the USB Type-C® cable (aircraft — gimbal) from the USB port. If the USB Type-C®
cable (aircraft — gimbal) is connected to the EXT port, remove the cable from the EXT
port.