Operating Instructions
Table Of Contents
-  WARNING
- Compliance Information
- Before first use
- Connection/Installation
- Preparing the app and the batteries
- Mounting the RTK kit on the aircraft and assembling the aircraft
- Installing the base station
- Preparing the remote controller and the aircraft
- Preparing a camera
- Mounting the gimbal on the aircraft
- Mounting a camera on the gimbal (when using the GBL-PX1)
- Mounting a camera on the gimbal (when using the GBL-T3)
- Settings/Operation
- Storing
- Flight Information and Specifications
- Compliance Information
19
Connection/Installation
[5] Attaching the damping plate and antenna units for aircraft to the
aircraft
Note
Be sure to attach the damping plate and antenna units for aircraft according to the following procedure.
Installing them in the wrong order may cause deformation or damage to the parts. Also, the antenna units for
aircraft may not be in the correct position, which may affect the aircraft's attitude control.
1 Confirm the orientation of the damping plate and place it on the
aircraft.
With the quick-release arrow surface face-down and the arrow pointing toward the front of
the aircraft, place the damping plate on the aircraft. Be careful not to get the cables caught
between the damping plate and the aircraft.
Quick-release arrow
2 Fold the antenna units for aircraft.
Hold the lock slides on both sides of the antenna units for aircraft and slide them toward the
top of the antenna units for aircraft to unlock and fold the antenna units for aircraft.
POWER
STATUS
Lock slide