Operating Instructions
Table Of Contents
-  WARNING
- Compliance Information
- Before first use
- Connection/Installation
- Preparing the app and the batteries
- Mounting the RTK kit on the aircraft and assembling the aircraft
- Installing the base station
- Preparing the remote controller and the aircraft
- Preparing a camera
- Mounting the gimbal on the aircraft
- Mounting a camera on the gimbal (when using the GBL-PX1)
- Mounting a camera on the gimbal (when using the GBL-T3)
- Settings/Operation
- Storing
- Flight Information and Specifications
- Compliance Information
31
Connection/Installation
Preparing the remote controller and the aircraft
When you use the ARS-S1 for the first time, refer to the Startup Guide included with the ARS-S1
and follow the steps below.
“Setup” chapter
• “Attaching a mobile device to the remote controller”
• “Loading battery packs in the aircraft”
• “Linking/setting up the remote controller and aircraft”
Preparing a camera
Prepare the camera before mounting it on the gimbal. (Both the camera and gimbal are sold
separately.)
[1] Inserting a battery pack and memory card
Insert a battery pack and memory card in the camera in advance. (ILCE-7RM5 is used in this
example.)
Battery pack
Memory card
Notes
• During flights, cameras consume battery power as you shoot. Always charge the camera battery sufficiently
before mounting on the gimbal.
• Use memory cards with sufficient free space for recording images.
• Make sure that the camera's battery cover is securely closed and locked.