Operating Instructions
Table Of Contents
-  WARNING
- Compliance Information
- Before first use
- Connection/Installation
- Preparing the app and the batteries
- Mounting the RTK kit on the aircraft and assembling the aircraft
- Installing the base station
- Preparing the remote controller and the aircraft
- Preparing a camera
- Mounting the gimbal on the aircraft
- Mounting a camera on the gimbal (when using the GBL-PX1)
- Mounting a camera on the gimbal (when using the GBL-T3)
- Settings/Operation
- Storing
- Flight Information and Specifications
- Compliance Information
34
Mounting a camera on the gimbal
(when using the GBL-PX1)
The installation procedure differs depending on the gimbal. Mount the camera on the gimbal
according to the instructions for your gimbal.
[1] Attach the L-Bracket to the camera
Note
Be careful not to get your fingers caught when operating the lever.
1 Remove the shoulder strap attachment from the camera.
Shoulder strap attachment
Note
Store the shoulder strap attachment securely so as not to lose it.
2 Remove the L-Bracket from the gimbal.
Loosen the lever, and move the L-Bracket forward to remove it while pressing the release
button at the bottom.
Lever
L-Bracket
Release button