Operating Instructions
Table Of Contents
-  WARNING
- Compliance Information
- Before first use
- Connection/Installation
- Preparing the app and the batteries
- Mounting the RTK kit on the aircraft and assembling the aircraft
- Installing the base station
- Preparing the remote controller and the aircraft
- Preparing a camera
- Mounting the gimbal on the aircraft
- Mounting a camera on the gimbal (when using the GBL-PX1)
- Mounting a camera on the gimbal (when using the GBL-T3)
- Settings/Operation
- Storing
- Flight Information and Specifications
- Compliance Information
35
Connection/Installation
3 Loosen the camera fixing screw, and temporarily attach the tripod
screw on the L-Bracket to the tripod socket on the bottom of the
camera.
Make sure there is a gap of about 1 mm (0.04 in.) between the L-Bracket and the bottom of
the camera.
Tripod socket L-Bracket
Tripod screw
Camera fixing screw
4 Pass the camera fixing screw through the hook for the shoulder strap
on the camera and secure it.
Hook for the shoulder strap
Camera fixing screw
5 Use a coin, etc. to fully tighten the tripod screw.
Notes
• Before flights, make sure the camera is firmly secured to the L-Bracket with the tripod screw and camera
fixing screw.
• When removing the camera from the L-Bracket, perform the reverse procedure.