Operating Instructions
Table Of Contents
-  WARNING
- Compliance Information
- Before first use
- Connection/Installation
- Preparing the app and the batteries
- Mounting the RTK kit on the aircraft and assembling the aircraft
- Installing the base station
- Preparing the remote controller and the aircraft
- Preparing a camera
- Mounting the gimbal on the aircraft
- Mounting a camera on the gimbal (when using the GBL-PX1)
- Mounting a camera on the gimbal (when using the GBL-T3)
- Settings/Operation
- Storing
- Flight Information and Specifications
- Compliance Information
37
Connection/Installation
[3] Connecting cables between the camera and gimbal
1 Connect the USB Type-C® cable (gimbal — camera) to the camera and
the gimbal.
Insert the plug of the USB Type-C® cable (gimbal — camera) included with the aircraft in the
camera USB port.
Insert the other end of the USB Type-C® cable (gimbal — camera) connected to the camera in
the gimbal USB port.
USB Type-C® cable
(gimbal — camera)
2 Make sure that the USB Type-C® cable (gimbal — camera) is properly
connected.
Make sure that the USB Type-C® cable (gimbal — camera) is wired in an S shape so as not to
interfere with the gimbal.
Note
If you wire the USB Type-C® cable (gimbal — camera) in a U shape, there is a possibility of it coming into contact
with the frame while the aircraft is in use. Wire the USB Type-C® cable (gimbal — camera) so that it forms an S
shape.