Operating Instructions
Table Of Contents
-  WARNING
- Compliance Information
- Before first use
- Connection/Installation
- Preparing the app and the batteries
- Mounting the RTK kit on the aircraft and assembling the aircraft
- Installing the base station
- Preparing the remote controller and the aircraft
- Preparing a camera
- Mounting the gimbal on the aircraft
- Mounting a camera on the gimbal (when using the GBL-PX1)
- Mounting a camera on the gimbal (when using the GBL-T3)
- Settings/Operation
- Storing
- Flight Information and Specifications
- Compliance Information
44
3 Attach the hot shoe cable included with this product to the camera.
Hot shoe cable
Notes
• When using the gimbal GBL-T3 set (sold separately), be sure to use the hot shoe attachment. Otherwise, the
camera may not be secured properly on the gimbal.
• If the hot shoe attachment has become detached from the hot shoe cable, insert the opening of the hot shoe
attachment into the thread of the hot shoe cable by turning it clockwise.
Hot shoe attachment
To use a camera with a short height
When using a camera with a short height such as the ILME-FX3 or ILCE-7C, attach the hot
shoe extension to the hot shoe cable. The hot shoe extension is included in the gimbal set
(sold separately).
Hot shoe extension