Operating Instructions
Table Of Contents
-  WARNING
- Compliance Information
- Before first use
- Connection/Installation
- Preparing the app and the batteries
- Mounting the RTK kit on the aircraft and assembling the aircraft
- Installing the base station
- Preparing the remote controller and the aircraft
- Preparing a camera
- Mounting the gimbal on the aircraft
- Mounting a camera on the gimbal (when using the GBL-PX1)
- Mounting a camera on the gimbal (when using the GBL-T3)
- Settings/Operation
- Storing
- Flight Information and Specifications
- Compliance Information
47
Connection/Installation
[4] Connecting cables between the camera and gimbal
Connect the flash sync relay cable to the hot shoe cable, and connect the camera and the gimbal
with the USB cable included with the aircraft.
1 Connect the flash sync relay cable to the hot shoe cable.
Connect the hot shoe cable to the connector of the flash sync relay cable.
Hot shoe cable
Flash sync relay cable
2 Connect the USB cable to the camera and the gimbal.
Insert the plug of the USB Type-C® cable (gimbal — camera) included with the aircraft or
micro USB cable (gimbal — camera) into the camera USB port. Connect the USB cable that
matches your camera port.
Insert the other end of the USB cable connected to the camera in the gimbal USB port.
USB cable