Operating Instructions

54
Flight Information and
Specifications
Flight Precautions
• Be careful not to cover the GNSS antenna
parts of the antenna units for aircraft
and the antenna unit for base station by
mistake. Doing so may affect the attitude
control of the aircraft.
• Do not fly the aircraft without the antenna
units for aircraft raised. Doing so may affect
the attitude control of the aircraft or cause
damage to the antenna units for aircraft.
• Check the version numbers of the “Airpeak
Flight” app and system software of the
aircraft and remote controller to confirm
that they are up to date.
• When using the GNSS correction
service instead of the antenna unit
for base station, use the mobile data
communication function of the tablet
or other mobile device mounted on the
remote controller. Turn off the Wi-Fi® and
Bluetooth® functions and do not use them.
Notes on use
About heat generation
The interface unit and the inserted SD
memory card may become hot during
operation, but this does not affect operation.
Carrying components
Do not carry the aircraft by holding the GNSS
antenna section of the antenna units for
aircraft installed on the aircraft. Doing so
may damage the GNSS antenna and cause
damage or injury if the aircraft is dropped.
Installing external devices
The USB port of this product can supply up
to 900 mA of current (if the external device
supports USB 3.2). If overcurrent conditions
exceeding 900 mA occur while an external
device is installed, it may affect flight
performance.
Maintenance and storage
• The recommended ambient temperature
range for storage is 18 °C (64 °F) to 30 °C
(86 °F).
• Thoroughly wipe off any water that has
adhered to the aircraft and this product
before storing them.
• Gently wipe off any dirt or dust on this
product with a soft, dry cloth.
• Do not use volatile substances such as
alcohol or paint thinner, as they may
damage the parts and cause deterioration.