Operating Instructions

57
Flight Information and Specifications
Specifications
Model
RTK-1
Dimensions
Interface unit: Approx. 19 mm (0.75 in.) ×
86mm (3.5 in.) × 64 mm (2.63 in.) (H × W ×
D)
Antenna unit for aircraft: Approx. 191 mm
(7.63 in.) × 130 mm (5.13 in.) × 56 mm
(2.25in.) (H × W × D)
Antenna unit for base station: Approx.
152mm (6.0 in.) × 41 mm (1.63 in.) × 41 mm
(1.63 in.) (H × W × D)
Mass
Interface unit: Approx. 55 g (2.0 oz)
Antenna unit for aircraft: Approx. 84 g (3.0
oz)/per unit
Antenna unit for base station: Approx. 105
g (3.7 oz)
Operating Temperature
-10 °C (14 °F) — 40 °C (104 °F)
Hovering Accuracy (*1)
Vertical: ±0.1 m (0.3 ft), Horizontal: ±0.1 m
(0.3 ft)
(RTK enabled)
Vertical: ±0.1 m (0.3 ft), Horizontal: ±0.1 m
(0.3 ft)
(GNSS (*2) and Vision Positioning
enabled)
Vertical: ±0.5 m (1.6 ft), Horizontal: ±0.5 m
(1.6 ft)
(GNSS (*2) enabled and Vision
Positioning disabled)
*1 When the RTK kit is attached to the aircraft
*2 When not using the RTK function of the
RTK kit and performing GNSS single point
positioning
RTK positioning accuracy*
Horizontal: 1 cm + 1 ppm, Vertical: 1.5 cm +
1ppm
* When the RTK function is available
GNSS
GPS, GLONASS, Galileo, BeiDou, QZSS
Supported correction data formats
RTCM 3.1, RTCM 3.2 MSM3, RTCM3.2 MSM4,
RTCM 3.2 MSM5, RTCM 3.2 MSM7
Recording media
SD memory card (UHS-I compatible) slot
• Design and specifications are subject to change
without notice.
• Product performance is subject to environmental
factors and usage conditions.