Operating Instructions
Table Of Contents
-  WARNING
- Compliance Information
- Before first use
- Connection/Installation
- Preparing the app and the batteries
- Mounting the RTK kit on the aircraft and assembling the aircraft
- Installing the base station
- Preparing the remote controller and the aircraft
- Preparing a camera
- Mounting the gimbal on the aircraft
- Mounting a camera on the gimbal (when using the GBL-PX1)
- Mounting a camera on the gimbal (when using the GBL-T3)
- Settings/Operation
- Storing
- Flight Information and Specifications
- Compliance Information
7
Before first use
• When using the GNSS correction service
You can also connect to the GNSS correction service* by configuring the network RTK function
in the “Airpeak Flight” app on your mobile device.
You cannot use an antenna unit for base station when using the GNSS correction service.
Interface unit
Antenna units for
aircraft
GNSS correction
service
Internet
Connect to the GNSS correction service via the
internet from your mobile device attached to the
remote controller (sold separately)
Install the interface unit and antenna units
for aircraft on the aircraft (sold separately)
* The GNSS correction service requires a contract with the distributor. For information such as
service contents and usage methods, please contact the distributor.
Supported devices
For cameras and lenses supported by this product, please check our Customer Support Website.
Select so that the total mass including this product is within the max takeoff mass of the aircraft.
https://electronics.sony.com/airpeak/support/compatibility