Micro Satellite System Operating Manual de instrucciones Owner's The model Instructions Record and serial numbers are located number in the space provided below. Sony dealer regarding this product. Model No. SA-VI_315/VE312 SA- VE315 SA- VE312 @2000 Sony Corporation on the rear of the unit. Refer to them whenever Record the serial you call upon Serial No.
To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. Do not install the appliance in a confined such as a bookcase or built-in cabinet. NOTICE FOR THE CUSTOMERS USA ¢ALmOq:_O REDUCETHE _K space. IN THE O_ ELECTRICSe_CK DO NOT REMO_E COVE_ 03A BACX3 NO US_R.SS_V_J_.
Table of Contents Hooking up the system Positioning Listening ..................... the speakers to the sound Adjusting the sound Precautions Specifications ..................... 7 ........................... 8 ............................. ............................................ Troubleshooting 4 8 10 ................................... ........................................
Hooking up the system Connect the speaker system to the speaker Make sure power to all components hook-up. Hookup A (for This configuration other videodevices. (included Rear (Right) 4 GB terminals of an amplifier.
Hookup B (for SA-VE315) Try this configuration instead of "Hookup A" in the following -- When there are no jacks on the amplifier -- Wllenyou want a strongerbass situations: fora subwoofer. sound from thesubwoofer.
Hooking Hookup up the system C (for SA-VE312) This configuration deck, orotheraudio Front (continued) is used when devices. tile amplifier is connected to a CD player, MD deck, cassette (Right) Front (Left) Subwoofer I Terminal connections @ @ OI @ @, @ Notes • Make sure the plus (+) and the minus (-) terminals and minus (-) terminals on the amplifier. • Be sure to tighten the screws • Make sure all connections short-circuit. of the speaker are firm.
Setting Positioning the speakers the speakers To prevent speaker vibration or movement while listening,attach the supplied foot pads to the bottom four corners of the center speaker*, front speakers, and rear speakers*. Location speaker of each *SA-VE315 only Center* Subwoofer io O Foot pads (Left) iv , ) Setting o?, "% (Left) (SA-VE315 ]o .// the center speaker only) Set the center speaker firmly on top o f the TV set, making sure it is completely level.
Listening to the sound Adjusting the sound Slight adjustments to the system can enhance your sound enjoyment. Adjusting subwoofer POWER the POWER indicator First, turn down the volume on the amplifier. The volume should be set to minimum before you begin playing 1 Turn on the amplifier program 2 the program on the subwoofer. The POWERindicator 3 and select the MODE LEVEL source. Press POWER lights source. on the subwoofer up green. Play the program source.
Setting your amplifier to enjoy movies (SA-VE315 only) For the Dolby Digital (AC-3) lfyour amplifier is connected internally or externally with a Dolby Digital (AC-3) processor, you should use thesetup menus for tile amplifier to specify tile parameters of your speaker system. For the Dolby Pro Logic Ifyouramplifieris connected internally or externally with a Dolby Pro Logic processor, you should set the surround effect mode to "NORMAL" on the amplifier for your particularspeakersystem.
Precautions If you encounter color nearby TV screen On This speaker system is magnetically shielded to allow it to be installed near a YV set. However, color irregularities may still be observed on certain types of TV sets. safety • Before operating the system, be sure that the operating voltage of the system is identical with that of your local power supply.
Troubleshooting Specifications Should you encounter a problem with your speaker system, check the following list and take the indicated measures. If the problem persists, consult your nearest Sony dealer. SA-VE315/VE312 There is no sound from the speaker system. • Make sure all the connections have been correctly made. • Make sure the volume on the amplifier has been turned up properly. There is distortion are connected. them. in the subwoofer AUDIO POWER If sound output.
SA-WMS315 (subwoofer) System Speaker system Speaker Active subwoofer, magnetically shielded Woofer: 16 cm (6 3/s in.), cone type Advanced SAW type output (8 ohms, 20 - 150 Hz, 0.