Manual

Hooking up the system (continued)

Hookup C (for SA-VE312)

This configuration is used when tile amplifier is connected to a CD player, MD deck, cassette

deck, orotheraudio devices.

Front (Right) Front (Left)

Subwoofer

Terminal connections

Notes

• Make sure the plus (+) and the minus (-) terminals on the speakers are matched to the corresponding plus (+)

and minus (-) terminals on the amplifier.

• Be sure to tighten the screws of the speaker terminals securely as loose screws may become a source of noise.

• Make sure all connections are firm. Contact between bare speaker wires at the speaker terminals may cause a

short-circuit.

• Do not connect the subwoofer to the amplifier's CENTER output terminal (which is for Dolby Pro Logic or

Dolby Digital (AC-3)). No bass sound will output from the subwoofer if you do.

• For details regarding the connections on the amplifier side, refer to the manual that was provided with your

amplifier.

Tip

All striped wires are minus (-) in polarity, and should be connected to the minus (-) speaker terminals.

6 GB