User guide Stereo Bluetooth® Headset SBH60
Contents Introduction...................................................................................3 Function overview.............................................................................3 Hardware overview........................................................................... 3 Basics.............................................................................................5 Charging the battery.........................................................................
Introduction Function overview Your Stereo Bluetooth® Headset SBH60 is designed to make life more convenient when you're on the go. You can use it together with an Android™ powered device such as a phone or tablet, or with a Bluetooth® compatible device such as a nonAndroid phone, a computer or a music player. When paired with a compatible device, you can use your headset to control incoming and outgoing phone calls or to listen to music.
7 Power key Press and hold down to turn the headset on or off. When the headset is on, briefly press to activate a notification light which shows the battery level by displaying different colours. Flashing red light: Low battery level Yellow light: Medium battery level Green light: High battery level 8 Microphone 9 NFC detection area Touch other devices to this area during NFC pairing. 4 This is an internet version of this publication. © Print only for private use.
Basics Charging the battery Before using the Stereo Bluetooth® Headset SBH60 for the first time, you need to charge it for approximately 1 hour. Sony chargers are recommended. To charge your headset 1 2 3 Plug one end of the USB cable into the charger. Plug the other end of the cable into the Micro USB port of your Stereo Bluetooth® Headset SBH60. After your headset is fully charged, the notification light turns to green.
To perform a factory reset 1 2 • Turn off the headset, then connect the charger so that the headset starts to charge. Press and hold down the Call key until a white notification light starts flashing. To force your headset to restart Press and hold down the Power key for at least 10 seconds until your headset restarts.
Getting started Preparing to use your headset with a Bluetooth® device Before you can start using your headset with a Bluetooth® device, you need to pair the headset with the Bluetooth® device manually using Bluetooth® or automatically using NFC. To manually pair your headset with a Bluetooth® device 1 2 3 4 5 Bluetooth® device: Make sure the Bluetooth® function is turned on. Turn off your headset. Headset: Press and hold down the Power key until a blue notification light starts flashing rapidly.
Using your headset Using your headset to handle phone calls Use the headset to handle incoming calls, for example, to answer or reject a call. You can also switch between different ongoing calls. The number of ongoing calls supported can vary depending on the phone operator or network. • To answer a call with the headset When you hear an incoming call signal, press the Call key. • To end a call During an ongoing call, press the Call key.
To switch to Multipoint mode 1 2 Make sure that the headset is turned on. Press and hold down both the Power key and the Volume up key until a purple notification light flashes twice. To manually pair your headset with two Bluetooth® devices 1 2 3 4 5 Make sure that the headset is in Multipoint mode and is paired successfully with the first Bluetooth® device. Turn off the headset. Headset: Press and hold down the Power key until a blue notification light starts flashing rapidly.
Troubleshooting Music from another device does not play in the headset • • • Make sure that the music-playing device is connected with the headset. Restart the music player application on the music-playing device. Make sure that the correct music source is selected. The headset turns off automatically • If the headset beeps several times shortly or a red notification light starts flashing rapidly before turning off, the battery level is low. Charge the battery.
Legal information Sony SBH60 Prior to use, please read the Important information leaflet separately provided. This User guide is published by Sony Mobile Communications Inc. or its local affiliated company, without any warranty. Improvements and changes to this User guide necessitated by typographical errors, inaccuracies of current information, or improvements to programs and/or equipment, may be made by Sony Mobile Communications Inc. at any time and without notice.
Declaration of Conformity We, Sony Mobile Communications AB of Nya Vattentornet SE-221 88 Lund, Sweden declare under our sole responsibility that our product Sony type RD-0170 and in combination with our accessories, to which this declaration relates is in conformity with the appropriate standards EN 300 328:V1.8.1, EN 301 489-3:V1.6.1, EN 301 489-7:V1.3.1, EN 301 489-17:V2.2.
