User Guide

above, you can adjust the focusing position for each lens used.
In MENU - 3 (Setup menu) - AF Micro Adj., change to On and make fine
adjustments from amount.
The focusing position shifts behind the subject the more you set to the "+" side and in
front of the subject the more you set to the "-" side.
Set the adjustment value while taking test photographs.
Note:
o If AF Micro Adj. is not set to On, the adjustment value cannot be registered.
o It is recommended that you adjust in the actual environment where you will
actually be photographing.
o If you attach a lens that has already been registered, the registered adjustment
value will be displayed.
o If the lens has not been registered, "±0" will be displayed.
o If "-" is displayed for the adjustment value, 30 types of lenses have already been
registered. To register a new lens, attach the lens to be deleted and set the
adjustment value to "±0", or clear the adjustment values to reset all registered
adjustment values.
o Making AF fine adjustments with lenses of other manufacturers may affect the
adjustment values of your Sony, Minolta, and Konica Minolta lenses. Do not use
the function with lenses of other manufacturers.
o If using lenses of the same specifications and Sony, Minolta, and Konica Minolta
lenses, AF fine adjustments cannot be set individually.
The SteadyShot indicator blinks and an
ERROR icon that looks like a hand appears.
If an error occurs with the SteadyShot feature, the SteadyShot indicator may blink and the LCD
screen or viewfinder will display the following icon:
Follow the steps below to resolve this issue.
1. Turn off the camera
2. Remove the battery.
3. Allow the camera to remain without power for 1 minute.
4. Reinsert the battery.