Operating Instructions
47
GB
Other Operations
SHAKE-X70D/SHAKE-X30D/SHAKE-X10D.GB.4-691-054-15(1)
To turn off the effect
••
Press DJ OFF.
••
Press the selected effect button
again (for FLANGER and ISOLATOR
only).
Note
••
The DJ Effect is automatically turned off
when you:
— turn off the system.
— change the function.
— activate or deactivate the PARTY
CHAIN function.
— change sound effect.
— use the Vocal Fader.
— change the key (Key Control).
••
If you activate the DJ Effect during
transferring, the sound effect will not be
transferred onto the USB device.
••
You cannot use VOLUME/DJ CONTROL
knob on the unit to adjust the volume
when the DJ Effect is activated.
Press +/– on the remote control to
adjust the volume.
Other Operations
Using the Control for
HDMI function
Connecting a TV compatible with
the Control for HDMI function* by
HDMI cable (High Speed HDMI Cable
with Ethernet, not supplied) enables
you to easily operate the device by a
TV remote control.
The following functions can be used
with the Control for HDMI function.
••
System Power Off function
••
System Audio Control function
••
Audio Return Channel
••
One-Touch Play function
••
Remote Easy Control
••
Language Follow
* Control for HDMI is a standard used
by CEC (Consumer Electronics Control)
for allowing HDMI (High-Definition
Multimedia Interface) devices to control
each other.
Note
These functions may work with devices
other than those manufactured by Sony,
but operation is not guaranteed.
Preparing to use the Control for
HDMI function
Press SETUP, then set [HDMI
SETUP]– [CONTROL FOR HDMI] on
the system to [ON] (page35). The
default setting is [ON].
Enable the Control for HDMI function
settings for the TV connected to the
system.