S O NY_ 2-584-079-,1/1/ DVD Player/ Video Cassette Recorder Operating For customers Instructions in the USA If you bye my questions d)out your Sony DVD-VCR, you m.y call Sony Information Services Company at 1-800-VHS-SONY 1847-7669). Customer For all other Sony product questions, please call Sony Customer Information Services Company at 1-800-222-SONY 17669). Or write to: Sony Customer Information Services Company 12451 Gatc_ay Boule'_ard Ft.
WARNING Welcome! To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet, Refer servicing to qualified personnel only. To prevent fire or shock hazard, de not place objects filled with liquids, such as vases, on the apparatus. CAUTION Tile use ol oplical instr/inlents wilh this producl will increase eye hazard. As tile laser beam used in this DVD player is hamllid to eye.;, do not aaell/pl to disassenlble tile cabinet.
ImportantSafety Instructions DVD Precautions On safety 1 2 3 4 5 6 7 Read these instructious. Keep these instructious. Heed all warnings. Follow all instructions. Do not use this apparatus near water. (;lea(( only with dry cloth. Do not block any ventilation openings. Install in accordance with tile manufacturer's instructions. 8 Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Table of contents 2 WARNING 2 Welcome! 2 General tS"ecautions 3 3 Important Safety Instructions DVD tS"ecautions 6 About this manual 6 8 This player call play the following discs Notes about discs Getting 9 Step 1 : Unpacking 10 Step 2 : Setting up the remote commander 13 Step 3 : Basic hookups 20 Step 4 : Selecting 22 Step 5 : Setting the clock 26 Step 6 : Presetting 30 Step 7 : Setting up the VCR Plus+ ® system (SLV-D560P only) Basic Operations Hookups 33 Playing discs 62 A
DVD Additional the DVD's Operations 77 Using 79 Zooming into a scene 80 Changing the angles 81 Displaying 82 Various (Program For use menu play, functions Shuffle play, Repeat play) 87 Changing Virtual 90 Playing surround all MP3 95 Playing JPEG 99 Playing VIDEO OFF" Functions track files CDs with VCR Additional 101 Quick 102 Recording Timer "PBC ON/ Operations Recording stereo and/or program For use of the DVD setting audio image television transmission nmy r
About this manual Check your model name Tile instructions in this manual are for the 2 models: SLV-D560P and SLV-D360P. Check your model name by looking at the rear panel of your DVD-VCR. SLV-D560P is the model used for illustration purposes. Any difference in operation is clearly indicated in the text, for example, "SLV-D560Ponly". Thisplayercan playthe followingdiscs Format of discs DVD VIDEO vmDEo ovo-.w,-.
Region code Your player has a region code primed on the back of tile unil and only will plat, DVD VIDEO discs (playback only/labeled wilh idenlical region codes. Tiffs system is used to protecl cupyrights. Exampleof discs that the player cannot play The player cannol play lhe following discs: • CD-ROMs/CD-Rs/CD-RWs olher than daose recorded in the formals listed on lhe previous DVDs labeled _ will also play on tiffs player. ]f you try to play any other DVD VIDEO.
Note on playback operations of DVDsand VIDEOCDs Notesaboutdiscs Stone pl,yback operalions of DVDs mM VIDE() CDs may be intentionally set by soflware producers. Since this player plays DVDs and VIDEO CDs according to the disc contents tile soflware producers designed, some playback features may not be available. Also, relier to tile instructions supplied witl_ the DVDs or VIDEO CDs. • To keep the disc clem'_, laandle Ihe disc hy its edge. Do nol touch the surfuce.
Getting Started Step Check 1 : Unpacking that you have received • Remote commander the following items with the DVD-VCR: • 75-ohm coaxial connectors cable with F-type • Size AA (R6) batteries Note • The supplied remole commander is for Ilaeexclusive use of tiffs DVDWCR.
Step 2 : Setting up the remote commander Inserting the batteries Insert two size AA (R6) batteries by matching the + and -on the batteries to the diagram compartment. Insert inside the negative the battery (-) end first, then push in and down until the positive (+) end clicks into position. Remote sensor Using the remote commander Yon can use this relnote conlnlander to operate this DVD-VCR and a Sony TV.
Controlling The remote other TVs with the remote commander commander listed in the t_llowing is preprogrmnmed to control table, set the appropriate Set TV / DVD.VIDEO at the top of the remote Hold down I/(,D, and enter Then release I/(D. your TV's non-Sony manufi_cturer's commander code number TVs. If your TV is code nmnber. to T V. using the number buttons. Now you can use the I/(.D,VOL +1-, CH +1-, MUTING*, TV/VIDEO and ENTER* buttons to control your TV.
Notes • If you enter a new code numbel: the code nun/ber previously entered will be erased. • If the TV uses a different remote control system from tile one programmed DVD-VCR, you camlot control your TV with the remote commander. to work with the • When you replace the batteries of the rmnote commander, the code number may change. Set the appropriate code number eve U time you replace the batteries.
Step 3 : Basic hookups Before you get started • Be sure to disconnect • Turn offthe power • Do not connect the AC power cord of each component the AC power cords until all of the connections you connect the AC power cord before the connections be able to use the Plug and Play function. • Be sure you make connections distortion. firmly. connecting. the best hookup are completed. are completed, Loose connections • If your TV does not match any of the examples dealer or qualified technician.
Audio/video (A/V) hookup If your TV has audio/video (A/V) input jacks, you will get better picture and sonnd if you hook up your DVD-VCR using these connections. If your TV does not have A/V inputs, see the following pages for antenna or cable hookups. Note that "Advanced Hookups" (page 62) explains additional hookup methods that will optimize the picture and sound for a tree "hometheater" experience.
Hookup 1 (Plug and Play) Antenna hookup Make the following TV). [] connections Use this hookup it" you are using an antenna if you are using: • VHF/UHF antenna (you get channels 2-13 • UHF-only antenna (you get channels 14 and higher) • Separate VHF (if you do not have cable and channels 14 and higher) and UHF antennas Rear of TV VHF/UHF Match the type of connector on your TV: A, B, or C.
Hookup 1 : DVD-VCR setup Plug the DVD-VCR into an AC outlet. The DVD-VCR automatically presets the DVD-VCR's when the DVD-VCR is plugged into the AC outlet. to AC outlet <_=_ clock and TV channels ..................... AC power cord The DVD-VCR starts clock and channels. presetting the k_kkk_ When Auto preset is completed, the current time appears in the display window. "UU You have now completed DVD-VCR setup.
Hookup 2 (Plug and Play) You have no cable box, or a cable box with only a few scrambled channels Recommended use Use this hookup if you do not have a cable box. system scrambles only a few channels. Also use this hookup if your cable What you can do with this hookup • Record any unscrambled What you cannot do • Record channels scrambled channel by selecting that require tile channel on tile VCR a cable box DVD-VCR Rear of TV VHF/UHF ..........
Hookup 2 : DVD-VCR setup Plug the DVD-VCR into an AC outlet. Tile DVD-VCR automatically presets tile DVD-VCR's when the DVD-VCR is plugged into the AC outlet. clock and TV channels II AC power cord The DVD-VCR starts presetting clock and channels. the When the Auto preset current time appears window. is completed, kk£A£A_ in the display You have now completed DVD-VCR setup. To change the on-screen display language to French "Step 4 : Selecting a language" on page 20.
Hookup 3 Connecting a cable box with many scrambled Recommended Use this hookup channels use if your cable system scrambles all or most channels. What you can do with this hookup • Record any channel What you cannot by selecting the channel on the cable box do • Record with the cable box turned • Record one channel oft" while watching another channel Rear of TV VHF/UHF Match the type of connector on your TV: A, B, or C.
Step 4 : Selecting a language You can change the on-screen display language. o®oo Before you start... OOOO • Turn on the DVD-VCR and your TV. • To control the DVD-VCR, set TV / DVD.VIDEO to DVD.VIDEO on the remote (page 10). • Set the "RF Output Channel" to "3CH" or "4CH" in "OPTION SETUP" menu (page 110). If your TV is connected to the DVD-VCR using A/V connections, set the TV to video input. • If the DVD player is in play mode, you cannot display the setup menu. Stop the DVD playback.
sF up o Press SET UP to exit the menu.
Step 5 : Setting the clock Using the Auto Clock Set feature Some TV and cable channels signals with their broadcasts. transmit 0®00 time O00O Your DVD- VCR can pick up this time signal automatically set the clock. @@@@ to %0@@ @@® The Auto Clock Set feature works only if a channel in your area is broadcasting a time signal. If broadcasters in your area are not yet sending time signals, set the time manually Before -,--------,d%RETURN start... • Turn on the DVD-VCR When €/4/_/* ...........
Press i,/4 ENTER. 4 to select "Auto", then press Press 1,/4 to select the item you want, then press @/,_, to make the setting. • For "Clock data CH" Leave the setting to "Auto" to have the DVD-VCR autonlatically search for a channel that carries a time signal. Press _,/,*. to select a channel that carries a time signal. Use this option if you know of a channel that carries a time signal. Most PBS member stations broadcast a time signal. For the fastest response, select your local PBS station.
Notes • Tile clock calmut be set automatically if you du not receive a channel that carries a time signal in yuur area. If so, set tile clock manually (page 24). • If there are only a few chanuels in your area that carry time signals, setting tile cluck automalically may take up to about 20 minutes. If nothing happens even after you wait abuut 20 minutes, set the clock manually (page 24). • If you made Hookup 3, make sure you leave the cable box on.
Press 4,/1!, to select ENTER. 4 Press i./4 5 Press _,, to select 6 Set the month, minutes "Manual", then press to set the hour. the minutes by pressing and set the 1./1.. clay, and year in sequence by pressing ,_ to select the item to be set, and press 1./4 to select the digits, then press *. The clay of the week 7 is set automatically. Press ENTER to confinn the setting. SETUP © Press SET UP to exit the menu.
Step 6 : Presetting channels This DVD-VCR is capable of receiving VHF channels 2 to 13, UHF channels 14 to 69 and unscrambled CATV channels 1 to 125. First, we recommend that you preset the receivable channels in your area using antomatic presetting methods. Then, if there are any unwanted channels, disable them manually. If you have already decided which channels you wish to preset, set them directly using manual presetting methods (page 28). O®OO @@@@ oo®® @@<9 Before you start...
2 Press tl./!_ to select "Channel Setup", then press ENTER. The "CHANNEL SETUP" menu appears. 3 Press tl./4 to select "Ant/Cable." 4 • To preset cable TV channels: Press */,*. to select "Cable TV." • To preset VHF and UHF channels: Press */,*. to select "Antenna." 5 Press tl./!_ to select "Auto Channel Memory," then press ENTER. All receivable channels are preset in numerical sequence.
Presetting/disabling Before • Turn on the DVD-VCR When channels manually you start... using a cable and your TV. box, turn it on. (_) • To control the DVD-VCR, set TV / DVD.VIDEO to DVD.VIDEO on the remote (page _"""" CH +/- 10). • Set the "RF Output Channel" "4CH" in "OPTION SETUP" (page 110). to "3CH" menu If your TV is connected DVD-VCR using A/V connections, TV to video input.
4 • CH/ TRACKING To preset/disable 1 Press the channel •q).Q .Q _'Q'Q •Q .@ .@ a channel: CH +/- or number I,/* buttons to enter Channel to be preset number. 2 Press to select 3 or "DELETE" Press ENTER. "ADD" (in memory) (deleted). Channel to be disabled 5 @ Press o_ RETURN to confirm the setting. RETURN 6 SET UP Press SET UP to exit the menu. © Note • |f you have not preset channels automatically, you cannot preset/disable channels manually.
Step 7 : Setting up the VCR Plus+ ® system (SLV-D560P only) How the VCR Plus+ system Whenever you want to record works a TV program, Example of "PlusCode" all you need to do is look up the "PlusCode" number, a number assigned to each program PIusCode I published in the TV section of most newspapers, cable TV listings, and even TV GUIDE magazine.
O®O0 _ooo SET UP QOO0 _'3@ @ @ "oo®® @@® t/}/_/_ ENTER o'% RETURN SETup Press SET UP, then press tl./l!, to se ect (OPTION) and press ENTER. 2 Press tl./!_ to select "Channel Setup", then press ENTER. The "CHANNEL SETUP" menu appears. 3 Press tl./!_ to select "Guide Channel Setup," then press ENTER.
4 The upper row shows VCR Plus+ guide channels and the lower row shows TV channels or cable box out put channels. Press I,/* to select the channel number that does not match the guide channel. • If you made Hookup 1 (page 15) or 2 (page on your TV (and VCR), then press tl,/4. 17): Enter the actual • If you made Hookup 3 (page 19): Enter the cable box output (usually 2, 3, or 4), then press tl,/I_,.
Basic Operations Playing discs Depending on the disc, some operations may be different or restricted. Refer to the operating instructions supplied with your disc. Before you start ,,. • Turn on the DVD-VCR and your TV. • Switch the input selector on your TV so that the signal from the player appears on the TV screen. • Set T V/DVD.VIDEO to DVD.VIDEO, then press SELECT DVD to control the DVD player (page 10). OOO_ @©® Q®® o®oo OOOO OOOO ÷_/_÷ ........... 41 _I
2 PLAY Q Press 12:> PLAY. DVD The disc tray closes and the DVD player starts playback. The display window shows the Hour Minute playback time:. Depending on the disc, a menu may appear on the TV screen. For DVDs, see page 77. For VIDEO ..... Second CDs, see page 99. appears when no disc is loaded. Tip • To make a video timer reservation during DVD playback, we recommend perlk_rmiug the operations under "Quick Timer Recording" (page 101 ).
Press To or _ Locate a poim quickly on the remote/or hold down _ or on the mild Tile playback speed changes as lk_lluws each time you press the button on the remote (ur depending on how long you press the button on the unit): • DVD li_st forward: PLAY --+ x 1.4 ••jD,.-• :.2__+ 1 _ --+ fast reverse: PLAY --+ 1.,441 --+ 241.41 --+ 341.41 --+ 441.41 --+ 5 41.41 --+ 641.41 • CD. MP3 :rod VIDEO CD fast forward: PLAY -+ 1_ --+ 21tH_ --+ 31tH_ lhst reverse: PLAY --+ 141.41 --+ 241.41 --+ 341.
Notes • No sound is output except for: during normal play during playback quickly or slowly with sound • You canuot perform playback quickly or slowly with sound when a virtual surround effect is set. • The fast reverse operation may not be possible lk}rCD. MP3 and VIDEO CD depending on the recording method. • You may not be able to use the lnstant Replay or lnstaut Advance functiou with some scenes.
Notes on playing DTS* sound tracks on a CD • When playing DTS-encoded CDs, excessive noise will be heard from the analog stereo jacks. To a_oid possible damage to tile audio system, the consumer should take proper precautions when tile analog stereo jacks of the DVD player are connected to an amplification system. To r!!joy DTS Digital Surround 'jxlplayback, an external 5.l-channel decoder system must be connected to tile digital .jack of tile DVD player.
Guide to the on-screen display You can check disc information during ,,_.._Number buttons playback. The displayed contents differ according to the type of disc being played. 0000 OOOO "oo®® GQ® t/_/./. ENTER d'-'* RETURN DISPLAY Press DISPLAY during playback. current title/track, chapter, counter The following information appears; type of disc, position, voice language, subtitle language and Custom AV Mode setting. Refer to "DVD Audio/Subtitle the abbreviation of the language.
To playback the desired You can playback this menu. title/track the desired Press tl./'!" during title/track playback or chapter or chapter using to select the desired item. DVD PLAY 136 Press I,/* to change Press ENTER Press DISPLAY menu. the item. to start playback.
Notes • Tile display may nut change as operated depending oil the disc. • Tile display windo'_x cuntinue indicatiug tile playing time even when tile counter position informatiun on the on-screen display is being changed. To adjust the playback picture (Custom AV Mode) Yon can adjust the video signal of the DVD or VIDEO from the player to obtain the picture suits the program yon are watching. Press tl,/,1!, during Mode icon. Press _,/* playback to change quality CD (with yon want.
Locking the disc tray You can lock the disc tray so that the disc tray is not opened by mistake. To lock the disc tray (Child Lock) SELECT DVD II • When the DVD-VCR is turned on, press I, II and SELECT DVD on the unit at the same time. "LOCK" appears in the display window. The disc tray is locked. To unlock the disc tray Press I, |I and SELECT DVD on tile unit at tile same time. Tile disc tray is unlocked. o O Notes • If you lock the disc tray while open. the disc tray will be locked after closing.
Playing a tape Before you start ... • Turn on the DVD-VCR and your TV. ,,,,,,,,,, n/@ • Switch the input selector on your TV so that the signal from the player appears on the TV screen. • Set TV / DVD.VIDEO then press SELECT VCR (page '%.......... 000_ @©® to DVD.VIDEO, VIDEO to control .......... TRACKING .......... the 10). ®® _®00 CLEAR O00O OOOO eO 0 @@i _....................... ..........._/_ ..........l,ql_ / )).1)4 ..........II PAUSE • STOP ............. E_ PLAY _...........
Additional tasks To Press Stop play • STOP Pause play: II PAUSE Resume play after pause II PAUSE ur [2> PLAY Fastqk)rward tile tape during stop Rewind tile tape during stop l_ject the tape ; If you pause the VCR for more than 5 minutes, tile VCR will automatically resume play. To turn off the power while rewinding Press I/(,D while the tape is rewinding. rewinding until it reaches To play/search (Rewind Shut Off) The power will turn off but the tape will keep the end.
To resume normal playback Press 12> PLAY. To use the time counter Press (.'LEAR display at tile point window resets automatically, see oil the tape to "0:00:00." "To search for that you want To search the counter to find for the 0:00:00 714q 7 .71 V DEO U" U U" U U c×_ l later. counter point" Tile counter 0:00:00 on page in the point 104. J To display the counter on the TV screen, press DISPLAY during normal playback.
Recording TV programs NN Before you start ... • Turn on the DVD-VCR and your TV. .......... n/_ • Switch the input selector on your TV so that the signal from the player appears on the TV screen. • Set T V/DVD.VIDEO then press SELECT VCR (page • To record -"""" C H +/- to DVD.VIDEO, VIDEO to control ............. Number buttons the 10). from a cable box, turn it on. • Make sure the tape is longer recording time. than the total JOOO®' JOOO® @@@@ -.......... TV/VIDEO _-----INPUT SELECT 00 ..
3 4 SP/EP Press SP/EP Q EP (Extended OREC Press • O "REC" (Standard to select the tape speed, Play) provides Play). SP or ER recording However, SP produces time three times as long as SP better picture and audio quality. REC to start recording. appears in the display window. To stop recording Press • STOP. To check the remaining tape length Press DISPLAY to display the time counter. With the display on, press DISPLAY again to check the remaining time.
To watch another TV program while recording Press TV/VIDEO to display "TV" in the display window. If your TV is connected to the VCR using A/V connections, TV's antenna input; if not, skip this step. Select another To watch channel a DVD while Press SELECT on the TV. recording DVD to control Press "& and place set the TV to the the DVD player. the disc on the disc tray. Press 12:> PLAY. The disc tray closes and the DVD player starts playback. automatically change to the DVD playback screen.
Recording TV programs using the timer You can preset up to eight programs time. Before you start... ............ •4L • Check that the DVD-VCR the correct time. • Turn on the DVD-VCR • Switch at a the input selector clock is set to on your TV so that the signal from the player appears the TV screen. • Set TV / DVD.VIDEO then press SELECT VCR (page 10). ooo @®® and your TV. ®®® on ,,,...................................... SET UP 0 O @ ............. :TV/VIDEO TIMER to DVD.
2 Set the channel number, date, and tape speed: 1 Press * to select each item in turn. 2 Press i./tf, to set each item. To correct a setting, setting and reset. INPUT SELECT © start and stop times, • To record press _. to return to that from a source connected to the LINE IN 1 or LINE-2 IN jacks, press INPUT "LI " or '%2" in the "CH" position. • To record the same program tf, while the date is flashing. SELECT or i.
To use the Auto Tape Speed function When you are recording a program in the Auto mode and the remaining tape becomes shorter than the recording time, the tape speed is automatically changed to EP mode. Note that some noise will appear on the picture when the tape speed you want to keep the tape speed, select SR To operate this function, Length" in "VIDEO FUNCTION SETUP" menu correctly (page is changed. set "Tape If 106).
Recording TV programs using the Dial Timer (SLV-D560P only) The Dial Timer timer recordings function allows you to make of programs without turning I/_ POWER CHANNEL +/- on your TV. Set the recording timer to record up to eight programs that will be broadcast within a month using the DIAL TIMER. The recording start time and recording stop time can be set at one minute intervals. DIAL Before you TIMER II start... • Turn on the DVD-VCR. • When nsing a cable box, turn it on.
DIAL TIMER Press DIAL TIMER to set the start time. "START" and the next quarter hour increment appear alternately in the display window. I I__ o, jmq J, J u 4 DIALTIMERTurn DIAL TIMER to set the recording start time. f_% You can set the recording start time in 15 minute intervals or adjust the time "____ in one minute intervals by pressing the CHANNEL +/- buttons on the unit. 0.A..EL (3 Q DIAL TIMER iq FHI q 3-3 m VIDEO] cream J Press DIAL TIMER to set the stop time.
6 DIALTIMER Turn DIAL TIMER to set the recording f_--_ You can set the recording "¢ _._ in one minute 0 7 stop tilne in 15 lninute by pressing or adjust +/- buttons the time on the unit. _J--i" i Fi ® @ interYals the CHANNEL O.A..EL DIAL TIMER 8 intervals stop time. VIDEO] C×> 1 jL_ mu-_D Press DIAL TIMER. Current channel DIAL TIMER Turn DIAL flashes TIMER in the display window. to set the channel number. _m. (_ /_ To record froma "_ _.
To return to the previous step To return to tile previous step, press tile CHANNEL same time during any of the Dial Timer settings. + and buttons on tile unit at tile To set the clock down DIAL TIMER so that MONTH indicator appears in the display 1 Hokt window. However, if the clock has already been set, the current setting appears. 2 Turn DIAL TIMER to set the month. DIAL TIMER. 3 Press DAY indicator appears in the display window. and press DIAL TIMER to set the clay and then the year.
About the Demonstration Mode Tile Dial Timer fmlction has it Delnonstratioi_l Mode that allows tile user, SIlL'tlits a salesperson, to enter more than eight examples of timer settings when demonstrating the use of the Dial Timer. It cancels the FULL notice which appears if eight programs have already been set. Do not use the Demonstration Mode for making timer recordings. Doing so may cause the settings to be inaccurate.
Recording TV programs using the VCR Plus+ ® system (SLV-D560P only) NIN Just enter the PlusCode TV program guide. number listed in the The date, time and channel number of that program are set automatically. You can preset up to eight programs together and manual Before • Check you timer settings at one time. start... that the DVD-VCR the correct the input selector and your TV. on your TV so that the signal from the player appears the TV screen. • Set TV / DVD.
3 •Q) _) .(_) •(_) _) ,(_) 'Q Press the nmnber buttons to enter the PlusCode To correct _) setting a setting, press _, to return 5 Press I./* to select the recording pattern: Enler code To record Select Only once Once PLUS+ Everyday Monday to Friday Mc>Fr Every Monday to Saturday Mo~Sa Everyday Daily Once a week Weekly o Press tl./!_ to select "Speed." 7 Press I./* to select the tape speed, Auto, SR or ER then press ENTER.
To stop recording To stop the VCR while recording, press • STOP. To use the DVD-VCR To use the DVD-VCR after setting before a timer the timer recording begins, just press I/(D. The timer indicator disappears from the display window and the DVD-VCR switches on. Remember to press I/(.D to reset the VCR to the timer recording standby mode after using the VCR. You can also do the following • Reset the counter • Display • Check (page 44).
Checking/changing/canceling settings Before you start... • Check that the DVD-VCR the correct time. • Turn on the DVD-VCR Q®O0 clock is set to o o o 0 _ -C_9 q9 q9 and your TV. • Switch the input selector on your TV so that the signal from the player appears on the TV screen. • Set T V/DVD.VIDEO then press SELECT VCR (page to control SET UP ......... TIMER the 10). • When using a decoder, • Insert Make a tape with its safety tab in place.
3 @ Press _ RETURN to confirm Press o_ RETURN again to exit the menu. the setting. RETURN When the timer settings overlap The program that starts frst has priority and the second program starts recording after the first program has finished. If the programs start at the same time, the program listed first in the menu has priority.
Locking the DVD-VCR (Child Lock) After you have set the timer, you can lock all of the buttons oil the DVD-VCR so that the settings are not canceled I/@ POWER by mistake. +__ _rr _o To lock the Ooeo DVD-VCR When the DVD-VCR appears remains _ is turned on, hold clown I/(_) POWER on the unit until "LOCK" in the display window. The DVD-VCR turns offand the @ indicator lit if there is a timer setting. The DVD-VCR will not work except tUr timer recordings.
Advanced Hookups A/V Receiver hookup [] Use this hookup if your A/V receiver Logic) decoder and 3 to 6 speakers You can enjoy the Dolby or multi-channel Surround audio (Dolby effects Digital) has a Dolby* only when playing Surround Dolby (Pro Surround audio discs. * Manul?_ctured under license from Dolby Laboratories. "Dolby", "Pre Logic", and tile double-D symbol are trademarks of Dolby Laboratories.
[] Use this hookup decoder, a digital if your A/V receiver has a Dolby Digital or DTS* input jack and 6 speakers This connection will allow you to use tlle Dolby Digital or DTS decoder fuuction of your AV amplifier (receiver). You are not able to enjoy the surround sound effects of this player. You must make connections using I[_ and I'_11. :: "DTS" and "DTS Digital Out" are trademarks of Digital Theater Systems, Inc. DVD-VCR Stereo audio to DIGITAL AUDIO OUT (COAXIAL or OPTICAL) 1=, < o Q.
S-Video/Component Make audio connections (OPTICAL Component using the LINE or COAXIAL)jacks Video hookup. [] an S-VIDEO OUT AUDIO L/R jacks or DIGITAL on the right side of the DVD-VCR Use this hookup Connect Video hookup if your TV has an S-VIDEO cord (not supplied). AUDIO OUT when you use S-VIDEO/ input jack Yon will enjoy high quality images. DVD-VCR TV : Signal flow (DVD only) ( i_ ¸ S=VIDEO or Audio cord .......... (not supplied) Coaxial .........
[] Use this hookup if your TV has component video input jacks Connect your TV via the COMPONENT VIDEO OUT jacks using a component video cord (not supplied) or three video cords (not supplied) of the same kind and length. You will enjoy accurate color reproduction and high quality images. See page 62 for audio connections. DVD-VCR (green) TV Component video cord ............ (not supplied) O. < -I o D.
DVD Settings and Adjustments Audio Setup _ "Audio Setup" allows you to set the sound according to the playback and connection conditions. o®oo ,........... SET UP _OOO OOOO @0@@ 'oo®® @@® t/_,/*/. ............. ENTER SETUP Press SET UP when the DVD player is in stop mode, thenENTER. press 1./1. to select _ then press DVD SETUP (DVD), Screen Parental 2 Press i./4 ENTER.
Press _,/* SETUP an item. Press SET UP to exit the menu. o Menu to select choices • Dolby Digital Selects the type of Dolby The default setting Digital is indicated signal. in hold print. D-PCM Select this when the player is connected to an audio cumpuuent lacking a built-in Dulby Digital decoder. Dolby Digital Select this when the player is cunuected to an audio component with a built-in Dolby Digital decoder. • DTS Selects whether or not to output DTS signals.
Screen Setup "Screen according conditions. Setup" allows you to set the screen to the playback O®OO and connection ............ SET UP O000 @@@@ 'oo®® @@® ........ t/_/./. ENTER .............. o_RETURN SETup Press SET UP when the DVD player is in stop mode, then ENTER. press i'/4 then press to select _ DVD SETUP (DVD), Screen Parental INN __ 2 Press tl./4 to select "Screen Setup," then press ENTER. 3 Press t1.
Press _,/_,, to select SETUP o an item. Press SET UP to exit the menu. Menu choices • TV Type Selects the aspect ratio of the connected TV (4:3 standard The default setting is indicated in bold print. or wide). 4:3 Letter Box Select this when you connect a 4:3 screen TV. Displays a wide picture with bands nn the upper and lower portions of tile screen. 4:3 Pan Scan Select this when you connect a 4:3 screen TV.
To set the "Progressive" If your TV accepts reproduction setting progressive and high quality (480p) format signals, you will enjoy accurate color image. Follow step 1 and 2 on page 68, then press tl./,!, to select "Progressive." Press I,/* 3 Follow to select "On," then press ENTER. the instructions appearing SCREEN on the screen.
Tip • The "Progressive" setting can be canceled by pressing II on the unit continuously for 5 seconds or more. or selecting "Ofl-' in step 2. Note • If you select progressive signal when you connect the DVD player to :, TV that cannot accept the signal in progressive format, the image quality will deteriorate. In this case. set "Progressive" to "O1"1 _'. O -I -I o,.
Setting the display or sound track language You can set various languages menu, sound track or subtitle. for the disc's o®oo 5000 ,-----------SET UP OOOO @0@@ bo®® @@® -t/4/*/* ENTER SETUP Press SET UP when the DVD player is in stop mode,ENTER. then press t/_ press DVD SETUP lo selecl _* 7' (DVD) and Screen Setup Parental Setup: INN __ 2 Press tl,/4 to select The "LANGUAGE 72 "Language Setup," then press ENTER. SET UP" menu appears.
3 Press tl,/,I, to select the language setup item from the displayed "DVD Menu," "Audio," or "Subtitle." list: Then press ENTER. 4 Press tl,/,I, to select • DVD MENU the desired You can select the desired disc's menu. • AUDIO language, then press ENTER. LANGUAGE language for the LANGUAGE AUDIO Switches the language of the sound track. When you select "Original," the language given priority in the disc is selected.
Parental Control (limiting playback by children) Playback of some DVD VIDEOs can be limited according to a predetermined level (_) such as the age of the users. The "Parental Control" fimction allows you to set a playback limitation []_ ooo_ level. l® ® ® o®oo 9,o00 Number buttons SET UP OOOO @0@@ ........_> PLAY ENTER SETUP Press SET UP when the DVD player is in stop mode, then press 'i./4 press ENTER. to select _ (DVD) DVD SETUP and Scroen Parental 2 74 Press tl.
3 •q)_ @ Q '@ '(b G _b (b _b Press * to set the parental control. • If you have not entered a password CREATEPASSWORD The display for registering a new password appears. Enter a 4-digit password using the number buttons. Enter PasswoKl @4% The display lk_r conlinning appears. Re-enter tile password. the password CREATEPASSWORD Re-enter Passwom @4@ • When you have already registered a PASSWORDCHECK password EnterPassword The display lk)r entering the password appears.
6 SET UP Press SET UP to exit the menu. (3 To change the password Select "Change Password" in step 4 on page 75. The display for entering a new password appears. Enter a new 4-digit password using the number buttons. The display for confirming the password appears. Re-enter To turn the new password. off the Parental Set "Use Password" Control function to "No" in step 3 on page 75. To play a disc for which Parental Control Insert tile disc, then press 11:> PLAY.
DVD Additional Operations Using the DVD's menu A DVD is divided into long sections of a picture or a music feature called "titles." When you play a DVD VIDEO which contains several titles, yon can select the title you want using the TOP MENU button. When you play DVD VIDEOs that allow you to select items such as the language for the subtitles and the language for the sound, select these items rising the MENU button. _,,_,_,,,,,, Number buttons oooo oooo o O@@ ................ • STOP @q3@ ........ ....
2 Press t_/4/I-/,_, ENTER. to select the item you want to play or change, You can also use the mnnber buttons to select then press the item. 'G'Q_ Q@_ Q@_ @ Note • 78 Usingthe Depending on the DVD VIDEO, a point by setting tile lime.
Zooming into a scene You can zoom into a scene during playback or still mode. To zoom into a JPEG image, see "Playing JPEG image files" ZOOM 0 ® 0 (_D, .............. OOOO OOOO on page 95. @@@@ bo®® @ @ _..) ........ I/I/_/. ENTER O < O MUTING/ Press ZOOM. + i ZOOM i i " o "appears. O 2 Press l./!l,/_,/* 3 Press ENTER to move "_" repeatedly to the position to change Each time you press the button, 2× -_ 4× -_ 2× -_ normal magnification when where you want to zoom in.
Changing the angles If various angles are recorded (nmlti-angles) for a scene on the DVD VIDEO, o®oo_ "_" appears in the display window. This means that you can change the viewing angle. o OOO0 ........... ANGLE @@@@ _o®÷i @QQ ............. (=/) ANGLE Press ANGLE during playback. The angle number appears on the display. The number after the slash indicates the total number 2 of angles. Press @/* repeatedly The scene changes to select the angle number. to the selected angle.
Displaying the subtitle _ If subtitles are recorded on the disc, you can o®oo change the subtitles or turn them on and off whenever you want while playing a DVD. OOOO le-÷ ®-® ................ SUBTITLE Loo ®-® @@® SUBTITLE/ TIMER Press SUBTITLE during playback. Ni_ EN_ NNC_f NN © O < O 1> Q. o 2 O Press @/* repeatedly to select the language. Depending on the DVD, the choice of language varies. Refer to "DVD Audio/Subtitle Language" on page 126 for the abbreviation of the language.
Various play mode functions (Programplay, Shuffle play, Repeat play) You can set the following • Program play modes: play (page 82), Program • Shuffle play (page 84), Shuffle • Repeat play (page 85) play MP3 audio tracks play MP3 audio tracks (page 92) (page 93) Note • The pla_ mode is canceled _hen: you open tile disc tray the player enters standby mode by pressing I/(_.
2 Press I,/* ENTER. to select "PROGRAM", then press PROGRAM Tlack Program 02 03 04 05 o6 07 08 O9 lO 11 13 14 15 17 18 19 Clear last 12 16 2o_ track IN[i1NEI N 3 Press tl./,l!,/l-/,_ to select the track number you want to program, then press ENTER.
Playing in random order (Shuffle You can shuffle the playback Subsequent "shuffling" different playing order. To shuffle may produce MP3 audio tracks, play) order of tracks. a OOOO see page 93. @0@@ bo®® @@® ENTER REPEAT/ SEARCH © 2 Press REPEAT mode. Press */* ENTER. To return SHUFFLE to select to normal Press CLEAR when the DVD player is in stop "SHUFFLE", then press play until "Off" appears at the upper left top of the TV screen during play.
Playing repeatedly (Repeat play) _ _ _ _ _ You can play all of the titles or tracks oil a disc or a single title, chapter, repeatedly. or track © © OOOO ............ CLEAR ............ REPEAT ,8@@@ 'oo®® @ (!) (i) ................. _,,/,,_ REPEAT/ SEARCH Press REPEAT during playback. _J@giii! © O < O _> Q. o REPEAT/ SEARCH Press REPEAT or I,/,_, repeatedly to select the item to be repeated. O When playing a DVD O • Chapter: repeats the current chapter.
To return Select "Oft" to normal play in step 2 or press CLEAR during repeat play. Tip • When you press • STOP during repeat play, repeat play is canceled. Notes • You cannot repeat play with DVD-RW in VR mode. • You cannot repeat play VIDEO CDs with PBC function on. See "Playing VIDEO CDs with "PBC ON/OFF" Functions" on page 99. • You cannot repeat play while in program play.
Changing the sound When playing a DVD recorded in multiple audio formats (PCM, Dolby Digital, or DTS), you can change the audio format. 0®o0 O00O If the DVD is recorded with multilingual tracks, you can also select the language. ....... AUDIO With CDs or VIDEO CDs, you can select the sound from the right or left channel and listen to the sound of the selected channel @@® through both the right and left speakers.
Virtual surround setting _ When you connect a stere(> TV or 2 front speakers, SURROUND lets you enjoy surround sound effects by using sound imaging to create virtual rear speakers fi'om the sound of the lixmt speakers without using actual rear speakers. _ _ w 0®00 OOOO oo®o -------SURROUND _oo®® @@® ............... (=/. SURROUND O 2 Press SURROUND Press @/* Surround repeatedly to select effect increases Surround1 "S < during playback. "Surround as shown l," "Surround2," below.
To cancel the setting Select "Off' in step 2. Notes • When tile phlying signnl will be difficult to hear. • When you t_ctivate amplifier (receiver). • Make sure spe_kers, does tile surround that your listening and that the speakers not contain effect, position :1signal lkn" tile rear speakers, turn off the surround is between are located setting and at an equal in similar the surround of the connected distance effects TV or from your surroundings.
Playing an MP3 audio track _ You can play back DATA CDs (CD-ROMs/ CD-Rs/CD-RWs) or DATA DVDs (DVDROMs/DVD+RWs/DVD+Rs/DVD-RWs/ DVD-Rs) recorded in MP3 (MPEGI Layer 3) l\_rmat. Audio @®® ®®® o®oo oo_,2 ............. REPEAT OOOO @0@@ [_> PLAY .............. • STOP ®@® .... t/_/_/_ ENTER 8%RETURN _-. Press A and place a DATA CD or DATA DVD on the disc tray, then press A to close the tray.
2 Press i./4 ENTER. to select "MP3", then press The first track starts playing. necessary. 3 @ RETURN 4 Pressdesired d% RETURN, the directory Repeat mode Press • STOP if then 1./4 to then select in the press left cohmm, press ENTER. Press 1./1. to select right column, the desired track in the MP3 track starts When a track or album 007 I is being played, the title track number FII R 014 rnp3 tack 1 81_UFf2 rnp3t ack2 rnp3 t]ack 3 r_ tlack 4 N_u[f _ _ playing.
Notes • Only the letters in the alphabet and numbers can be used for album or track names. Anything else is displayed as an asterisk. • Upto 12 alphanumeric characters can be displayed fl_r album or track names. • ID3 tags cannot be displayed. To program MP3 audio tracks Press • STOP twice, then press REPEAT. Press _,/,_, to select "PROGRAM," then press ENTER. _RO_RAM;; SHUFFLE _ PROGRAIVl J IDlaEC_OR¥007 L_/_ OaDER'm0 album 1 _buIrl _ album3 album4 album5 album6 album 7 Press i.
To return to normal play Press CLEAR during program play. Tip • You calmot repeat play while in program play. To shuffle MP3 audio tracks Press REPEAT Press <./* when tile MP3 is ill stop mode. to select "SHUFFLE," then press ENTER. To return to normal play Press CLEAR during shuffle play. Tips • Shuffle play will stop when all tile tracks are played back. • You calmol repeal play while in shuffle play.
The Playback The playback as follows. • Structure Tree1 order of MP3 audio order of albmns of disc contents Tree2 Tree3 tracks and tracks Tree4 recorded on a DATA CD or DATA DVD is Tree5 [_ When tracks track you insert a DATA CD or DATA DVD and press 12> PLAY, the numbered are played sequentially, from @ through @. Any sub-albums/tracks contained within a currently selected album does not take priority over the next album in the same tree. (Example: _ contains _ but (_) is played before @.
Playing JPEG image files You can play JPEG image files on DATA CDs (CD-ROMs/CD-Rs/CD-RWs) or DATA DVDs (DVD-ROMs/DVD+RWs/DV[)+Rs/DV[)RWs/[)VD-Rs). 000_ q)®® ©®® 0®0o OOOO OOOO @@@@ _00 _;_III_II .................. D> PLAY _,,,,,,,,,,,,, • STOP ,,,' ENTER ,,,,,,,,,,,,_MENU ..... TOP MENU _DISPLAY C_ < C_ _> o.
2 Press t1_/'I" to select "JPEG", then press ENTER. The "Album" display will appears. If you do not press ENTER after selecting a media type, the selected media will he automatically played. 3 Press _/1_1_1 I./,_, to select to select the next/previous an image in the "Album" To display the selected album page, then press tl,/,I,/ display.
To zoom in an image Press tl,/4/I-/* to select an image in tire "Album" display, then press ENTER. Press I,/* to select " :_ ", then press ENTER. " _:! " appears. Press tl./I_/I-/* to move " ;Q " to the position where you want to zoom in. Press ENTER repeatedly to change the magnification. Each time you press ENTER, the magnification changes as shown below. 2x -_ normal magnification Note • You cannot use ZOOM on the remote in JPEG image files on DATACD/DATADVD. To enjoy the Slide show Press tl.
About JPEG image files You can play back DATA CDs (CD-ROMs/CD-Rs/CD-RWs) ROMs/DVD+RWs/DVD+Rs/DVD-RWs/DVD-Rs) However, the discs must be recorded according or DATA DVDs (DVD- recorded in JPEG format. to ISO9660 Level l/Level 2 or Joliet fornlat and DATA DVDs of Universal Disk Format (UDF) for the player to recognize the tracks (or files).
Playing VIDEO CDs with "PBC ON/OFF" Functions NN The PBC (Playback control) function allows you to search and perl\>rm other operations imeractively. PBC playback lk41ows a selection menu displayed oll your TV screen. .............. Number buttons oooo oooo b®®® @@® ENTER d'-'* RETURN MENU O < O 1> Q. o O MENU Press MENU to select "PBC ON." The menu t_r your selection appears. o u_ 2 Press i./!, to select the item number You call also use the number buttons you want.
Press ENTER. 4 Follow the instructions in the menu tUr interactive operations. Refer to the instructions supplied with the disc, as the operating procedure may differ depending on the VIDEO CD. To return to the menu Press _ RETURN. To play using "PBC OFF" Press MENU to select "PBC OFF." When "PB(! OFF" is selected, tile DVD player starts contiuuous play. Yuu cannot play still pictures such as a menu. Tu return to "PBC ON." press MENU to select "PB(! ON." Note • Depeuding on the VIDEO CD.
VCR Additional Operations Quick Timer Recording NN After you have started recording, you can have the VCR stop recording autonmtically after a specified @@@@1 s® duration. @@@ While recording, press • REC. VIDEO U-D U Press • REC repeatedly Each press advances to set the duration e) time. < O 30 1> the time as follows. --_4:00-=_ The tape counter recording.
Recording stereo and bilingual programs Recording stereo programs When you receive a program broadcast in stereo, press AUDIO the TV screen. You can also select "Left," "Right," or "Mono." stereo program, select "Mono." The sound will be recorded fi and normal audio tracks) but with less noise. Recording bilingual to display "Hi-Fi" on If there is noise in the in monaural (on both hi- programs Press AUDIO to display "SAP" on tile TV screen.
Searching using various functions The VCR automatically marks the tape with an index signal at the point where each recording begins. You can easily find a specific point using various search functions. -------------SEARCH o @0@@ OO@O b®®® ------_ PLAY .............. €/€/<./. To search using the index function (Scan and Play) The VCR automatically marks tile tape with an index signal at tile point where each recording begins. Use these signals as references to find a specific recording.
To search for the counter 0:00:00 point To mark a point on tile tape that you want to find later, reset tile tape counter "0:00:00." The VCR automatically counter. Press SEARCH. Press tl.. fi_st-forwards The VCR starts searching the 0:00:00 or rewinds and autonmtically to the 0:00:00 to point on the tape stops at Goto[0:00:00] point. 0:01:30 To search for a blank portion The VCR automatically searches find a point you can start recording Press SEARCH. Press !1,.
Adjusting the picture (tracking) Although the VCR automatically when playing a tape, distortion recording is in poor condition. adjusts the tracking may occur if the In this case, manually ac[iust the tracking. Press TRACKING +/- to display the tracking meter. The distortion shouM disappear as you press one of the two tracking buttons. To resume automatic tape and reinsert it. tracking adjustment, Tracking meter eject the Note • The auto tracking adjustment mode on other VCRs.
Changing menu options You can change the tape length, auto play and auto repeat settings. Normally the def:tult settings are used. settings if necessary. Change _OOO OOOO these -_ SET UP @0@@ "oo®e _,,_,,.,..D>PLAY _Q(b ENTER SET UP 0 Press SET UP when the DVD player is in stop mode. Lan _ uage Cl/annel ETU_I OPTION :English S Setup Auto Power Channel Oil RF Output [[3CH] Ofl ] NN 2 Press tl./4 ENTER.
SET uP O Press I,/* to change the setting. Press SET UP the menu. to exit Menu choices Tile detkmlt Menu option Tape Length Auto Auto settings Phly Repeat are indicated in bold print. Set this option to • T-120 when • T- 160 when using a T- 160 length • T- 180 when using a T- 180 or longer • On to start playback automatically, its safety tab removed. • Off to turn off Auto play.
Editing with another VCR How to connect to record on this VCR TV This VCR (Recorder) J Oooo_ Other VCR (Player) Audio/video cord (not supplied) CZ_/J:::. : Signal flow Notes • Make sure you connect the plugs to jacks of the same color. • If the other V(!R is a monaural type and connected to this VCR's LINE-2 IN jacks, connect the audio plug to the AUDIO L (white)jack. The sound is recorded oil both right and left channels. If you connect to the AUDIO R (red).jack.
Operation Before (when recording on this VCR) you start editing • Turn on tile VCR and tile TV and set it to the video channel. 1/j the display window. i "LI" Press or"L2" INPUT in SELECT to display Press SP/EP to select the tape speed, _ -L===_ _ _ SP or EP. o II Insert a source tape with its safety tab removed into the other (playback) Search for the point to start playback and set it to playback pause. Insert a tape into this (recording) and press II. Press • VCR.
Additional Information General setup information 0®00 SET UP 0000 @@@@ bo®÷ @@® ......... t/_/_/. ENTER SET UP Press SET UP when the DVD player is in stop 0 mode, then press ,1,/4 to select (OPTION), then press ENTER. 2 Press ,1,/4 to select the option to change. 3 Press <./*to change the setting. OPTION SETUP When changing the "RF Output Channel," confirmation messages will appear. Press ENTER to confirm the messages.
SETUP © Menu Press SET UP to exit the menu. choices Tile default settings are indicated in bokt print. Menu option Set this option to A/lto Po'_er Off • "Off" to de_lctiv_lte tile A/lto Power Off t/lnction. • "lHr"/"2Hr" to turn tile DVD-VCR off automatically if no signal is received and you do not press any of tile buttons during this time. RF Output Channel Setting • "3CH" when using channel 3 to receive tile VCR signal.
Turn on your TV and set it to the channel The channel change you selected in step 4 appears in step on the TV screen. when you press CH +/ , you have made the correct Whenever Attaching you selected you use the DVD-VCR, the external antenna set the TV to the channel (3CH or 4CH). If the channels setting. selected connector When using a 300-ohm twin lead cable for a VHF/UHF antenna, use an antenna connector (not supplied) DVD-VCR.
Troubleshooting If you have any questions or problems dealer. (For customers in USA) General a. a_ O not covered below, please consult your nearest Sony Troubleshooting Symptom Remedy Tile I/Q) switch does not l'm/ction. • Counect tile AC po'_ er cord securely. Tile power is turned on but the DVDVCR does nol operate, • Moislure condensation has occurred. Turn the power rift. unplug Ihe AC power cord and leave tile DVD-VCR Io dry for over three hours.
DVD Troubleshooting Symptom There is no picture/picture appears. Remedy noise Q. Even though you set the aspect ratio in "TV T>pe" of the "SCREEN SETUP" menu the picture does not fill the screen. • The aspect ratio of the disc is fixed on your DVD. There is no picture from your VCR ccmnected to the LINE IN jacks. • The DVD player must be in standby mode to view pictures from your VCR. There is no sound. • Re-com_ect the comlecting cord securely. • The ccmnecting cord is dmnaged.
Symptom Remedy Tile disc does not play. • The disc is turned over. • Insert tile disc with the playback side facing down on the disc tray. • The disc is skewed. • The player cannot play certain discs (page 6). • The region code on the DVD does not match the player. • Moisture has condensed inside the player (page 3). • The player caunot play a recorded disc that is not correctly finalized (page 7). • Make sure the TV / DVD.VIDEO switch is set correctly.
Symptom Remedy The subtitle language cannot be changed or turned olf. • Try using the DVD's n;enu instead of the direct selecti(m button on the remule (page 77). • Multilingual subtitles are not recorded on the DVD being played. = o • The DVD prohibits the changing of the subtitles. The angles cannot be changed. o,. O • Try using Ihe DVD's menu inslead of the direcl seleclion button on Ihe remole (page 77). • Multi-angles are not recorded on the DVD being played.
Symptom Remedy The timer does not operate. • Check that tile clock is set. • Make sure a tape has been inserted. • Check that the safety tab has not been removed. • Make sure the tape is not at its end. • Make sure a program has been set lk_rtimer recording. o • Make sure your timer settings are past the current time. • Check that the cable box is turned on. .E • The clock stops if the DVD-VCR is disconnected from the wall outlet for more than one minute. Reset the clock and timer.
Glossary Chapter (page 38) DVD (page 6) Sections of a picture or a music feature that are smaller than titles. A title is composed of several chapters. Depending on the disc, no chapters may be recorded. A disc that contains up to 8 hours of moving pictures even though its diameter is the same as a CD. Dolby Digital (pages 62 and 67) Digital audio compression technology developed by Dolby Laboratories. This technology cont_rms to 5.1 -channel surround sound.
Interlace format Interlace format shows every other line of an image as a single "field" and is the standard method for displaying images on television. The even number field shows the even numbered numbered lines of an image, and the odd field shows the odd numbered lines of an image.
Specifications System COMPONENT Phono Lair Sell]iCol]dllclor VIDEO Y: 1,0 Vp-p/Pb. lair S-VIDEO OUT (Y, Pb, Pr) jack Pr: 0,7 Vp-p, 75 ohms OUT Formal 4-pin, VHS NTSC slandard nfini-DlN Y: 1.
Index to parts and controls Refer to the pages indicated in parentheses ( ) for details. Front panel SLV=D560P SLV-D360P [] I/(_) POWER (on/standby) switch (11 ) [] || (pause) button [] 12:> (play) button *1 (34) (42) [] DIAL TIMER .
Display window [] DVD indicator (34) [] Angle indicator [] MONTH [] DAY indicator* [] YEAR indicator* (54) [] DATE indicator* (51) [] Record indicator (46) [] VIDEO indicator (42) (80) indicator* (51 ) (54) [] Tape indicator [] Timer indicator [] STEREO [] Playing time/clock/current indicator (34) (42) status [] SURR (88) [] DTS indicator (67) [] Disc indicator (34) Index to parts and controls (49) indicator (surround) :_ SLV-D56t)P only 122 (42) (102)
Rear panel DVD player and VCR DVD player [] AC power cord (13) (16) [] LINE OUT AUDIO [] LINE IN l VIDEO/AUDIO (108) [] COMPONENT L/R jacks [] LINE OUT VIDEO/AUDIO L/R jacks (14) [] IN (FROM AN'E) connector (15) [] OUT (TO TV) connector (15) only L/R jacks VIDEO (64) OUT Pr/Pb/Y jacks (65) [] S-VIDEO OUT jack (64) [] DIGITAL AUDIO OUT/OPTICAL jack AUDIO OUT/COAXIAL jack (63) [] DIGITAL (63) D. o.
Remote commander for DVD ...............] [] CLEAR button (83) [] ANGLE button (80) [] SET UP button (20) [] SUBTITLE [] AUDIO [] o÷ SKIP button [] ,, REPLAY [] || [] [2::>PLAY button *j (34) [] _/4/_,/* buttons ENTER button .2 (20) ...............] ......... [] _ (open/close) button [] TV/DVD.
Remote commander for VIDEO F'-_ .... o TIMER button (48) [] AUDIO button *j (102) [] ** SKIP button [] ÷, REPLAY [] SP (Standard button (46) [] • REC (record) [] || PAUSE button [] _ (43) ......................... [] oQ :: [] Play)/EP (Extended button Play) (46) (43) tl./tf'/l,/* buttons ENTER button .2 (20) [] DISPLAY [] I/(_) (on/standby) @.......... (43) PLAY button *1 (42) ..............
DVD Audio/Subtitle 126 Abbreviation Language ARA Arabic BUL Bulgarian (!HI Chinese CRO Croatian CZE Czech DAN Danish DEU German ENG English ESP Spanish FIN Finish FRA French GRE (;reek HUN Hungarian IDN Indonesian IND Hindi ISL Icelandic ITA ltalian IWR Hebrew JPN Japanese KOR Korean MAL Malay NLD Dutch NOR Norwegian POL Polish POR Portuguese RUS Russian SVE Swedish THA Thai TUR Turkish VIE Vietnamese ZAF Afrikaans DVD Audio/Subtitle Languag
Index Numerics I 16:9 69 4:3 Letter Box 69 4:3 Pan Scan 69 Instant Advance 35 A d A{!justing picture 105 tracking 105 Angle 80 Antenna hookup 15 Audio track 102 JPEG 6, 95 Instant Replay 35, 43 Instant Skip 43 M Cable hookup 13 Chanuel line-up chart 30 Cleaniug tile video heads 116 (?lock setting 22 Counectiug (?able TV 19 couuector 112 VHF/UHF baud mixer 112 Counter 44 Custom AV Mode 40 D Monaural 102 Monitoring audio during playback 102 MP3 6, 90 N Normal audio track 102 P PBC (Phqback cont
http://www.