Manual
To watch another TV program while recording
Press TV/VIDEO to display "TV" in the display window.
If your TV is connected to the VCR using A/V connections, set the TV to the
TV's antenna input; if not, skip this step.
Select another channel on the TV.
To watch a DVD while recording
Press SELECT DVD to control the DVD player.
Press "& and place the disc on the disc tray.
Press 12:> PLAY.
The disc tray closes and the DVD player starts playback. The TV screen will
automatically change to the DVD playback screen.
To save a recording
To prevent accidental erasure, break
off'the safety tab as illustrated. To
record on the tape again, cover the tab
hole with adhesive tape.
Safety tab
Tips
• To select 11 chllnne], yo/1 can use tile n/lmber buttons on the renlote conlmander. Enter the
channel number, then press ENTER.
• You can select a vide() source from the LINE IN 1 or LINE-2 lN.jacks using the INPUT
SELECT button.
• The display appears on the TV screen indicating information about the tape, but the
information will not be recorded on the tape.
• If you do not want to watch TV while recording, you can turn off the TV. When using a cable
box, make sure to leax e it on.
Notes
• The remaining tape length may not be indicated accurately for short tapes such its T-20 or
%30, or tapes recorded it) LP mode.
• It may take up to one minute for the VCR to calculate and display the remaining tape length
after you press DISPLAY.
• You cannot record a DVD to a VCR tape.
• To watch a TV program during video recording, stop disc playback.
O
O
Recording TV programs 47