User guide
Table Of Contents
- Precautions
- 4
- 11
- 12
- 16
- 19
- 21
- 23
- 24
- 25 28
- 33
- 36
- 38
- 42
- 47
- 51
- 54
- 56
- 57
- 59
- 62
- 64
- 65
- 66
- Back Cover
- Front panel For SLV-SE820B
- For SLV-SE820B and SE720B
- For SLV-SE620B and SE220B
- For SLV-SE820B, SE720B and SE620B
- For SLV-SE220B
- TV control buttons
- Code numbers of controllable TVs
- To a stereo system (not available on SLV- SE620B and SE220B)
- To a satellite or digital tuner with Line Through
- For SLV-SE820B, SE720B and SE220B
- For SLV-SE620B
- To cancel the Auto Set Up function
- Before you starts
- o
- o
- o
- o
- o
- o
- o
- o
- o
- o
- o
- o
- o
- To stop recording
- Daily/weekly recording
- To use the Auto Tape Speed function*^
- Before you starts
- To resume normal playback
- To use the shuttle ring in jog mode
- Before you starts
- To extend the duration
- To cancel the duration
- To stop recording
- Before you starts
- When the timer settings overiap
- To select bilingual sound while recording
- To select the sound while recording
- To find a specific recording by scanning (Index scan)
- To search a specific recording (Index search)
- To stop searching
- To turn on the indicators in the dispiay window
- Menu choices
- RÉGLAGES UTILISATEUR
- FONCTIONS AVANCEES
- Before you start editing
- To stop editing
- Tip
- Before you start...
- To stop editing
- System
- Inputs and outputs
- General
- Supplied accessories
- Quick Start Guide
Press OK, then press M/^ to move
to the desired programme position.
LISTE STATIONS TV
ST CAN. NOM DEC SYS.
1 0 2 7 AAB - NON L / L'
2
3 0 3 0 CDE - NON L / L'
Mi iNO^MiL / Uk^
** 5 0 2 9 L MN- NON L / L' ►
AT MODIF. ST : OK
SORTIE : MENU
Press OK to confirm the setting.
6
7
o
To change the programme position of another station, repeat steps 3
through 5.
Press MENU to exit the menu.
Disabling unwanted programme positions
After presetting channels, you can disable unused programme positions. The disabled
positions will be skipped later when you press the CHAINE +/- buttons.
Before you starts
• Turn on the VCR and the TV.
• Set the TV to the video channel.
• Refer to “Index to parts and controls” for button locations.
1
o
Press MENU, then press M/f/</
, to highlight INSTALLATION,
and press OK.
[Si
INSTALLATION AUTO
INSTALLATION MANUELLE
SMARTLINK
SELECT. \ ^ REGLER : ►
FIN : OK SORTIE : MENU
continued m
Changing/disabling programme positions 29