User guide SmartWatch 2 SW2
Contents Getting started..............................................................................3 Introduction........................................................................................3 Overview............................................................................................3 Charging............................................................................................3 Turning on and off..............................................................................
Getting started Introduction With SmartWatch 2, you can keep track of what happens on your Android™ device without taking it out of your pocket or bag. When a call, message or other notification comes in, your SmartWatch 2 vibrates. When your SmartWatch 2 is not connected to your Android™ device, SmartWatch 2 works as a regular watch, and some applications on your SmartWatch 2 are still available. Overview 1. Light sensor 5. Back key 2. Power key 6. Touchscreen 3. Actions key 7.
To charge your SmartWatch 2 1 2 Plug one end of the USB cable into the charger or into the USB port of a computer. Plug the other end of the cable into the Micro USB port of your SmartWatch 2. A charger may not be included at purchase in all markets. Turning on and off • To turn on or off your SmartWatch 2 Press and hold down until the SmartWatch 2 vibrates. Setting up your SmartWatch 2 The quickest way to get started with your SmartWatch 2 is by connecting it to your Android™ device using NFC.
Setting up using NFC To set up using NFC To save data costs, make sure that your Android™ device is connected to a Wi-Fi® network. 1 2 3 4 5 6 Android™ device: Make sure that the NFC function is turned on and that the screen is active and unlocked. SmartWatch 2: To turn on your SmartWatch 2, press and hold down . Place the Android™ device over the back of your SmartWatch 2 so that the NFC detection area of each device touch each other.
Adding features to your SmartWatch 2 Install additional applications for your SmartWatch 2 to add more features. For example, you can use your SmartWatch 2 to control the music player in your Android™ device. 1 2 3 4 To install an application from your Android™ device Drag the status bar downwards, then tap SmartWatch 2. Select an application in the list. To search for an application which is not in the list, tap Search for applications, then follow the instructions that appear on the screen.
Learning the basics Using the touchscreen Tapping • • Open or select an item. Mark or unmark a checkbox or option. Touching and holding • Activate an item-specific menu. Swiping • • Swipe up or down a list. Swipe left or right, for example, between Home screen panes. 7 This is an Internet version of this publication. © Print only for private use.
Using the keys Power • Switch between the Home screen and the clock screen Back • Go back to the previous screen within the application or close the application. Home • Go to the Home screen. Actions • Open a list of options available in the current screen or application. Home screen The Home screen contains all the applications on your SmartWatch 2. You can arrange the application icons on the Home screen alphabetically or by most to least used. • To go to the Home screen Press .
There are several different watch faces to choose between. You can also create a watch face in your own style. • To go to the clock screen Briefly press . The clock screen backlight turns on if you press briefly. • To exit the clock screen Press twice. 1 2 3 To choose a watch face From the Home screen, find and tap . Tap Watchfaces, then swipe left or right to view the watch faces available. Tap the watch face you want to use.
Basic settings Basic settings View and change settings from the Settings menu on your SmartWatch 2 directly. • To open the settings menu From the Home screen, find and tap 1 2 3 To adjust the screen brightness From the Home screen, find and tap . Find and tap Display > Brightness. Drag the slider to adjust the brightness. . Set a lower brightness to save battery power. 1 2 3 To enable or disable the vibrate mode From the Home screen, find and tap . Find and tap Vibrate.
You can also force your SmartWatch 2 to shut down in situations where it hangs or won't restart normally. When you restart your SmartWatch 2 after forcing it to shut down, no settings or personal data is deleted. 1 2 3 To perform a factory data reset From the Home screen, find and tap Find and tap Reset SmartWatch. To confirm, tap . • To force your SmartWatch 2 to shut down Press and hold down until your SmartWatch 2 turns off. . 11 This is an Internet version of this publication.
Using your SmartWatch 2 Viewing event notifications Once you have installed them, many of your SmartWatch 2 apps send notifications that you can view on your SmartWatch 2. When a notification arrives, SmartWatch 2 vibrates and the application appears on the screen. If SmartWatch 2 is disconnected from your Android™ device, you can only view notifications which were received before disconnecting. See Adding features to your SmartWatch 2 on page 6.
• To mute your Android™ device when a call is coming in Tap . You can only mute the ringtone emitted by your Bluetooth® headset by tapping the mute button on your Android™ phone or tablet. 1 2 To reject a call with a predefined message When a call arrives, tap Reject with message. Select a message, then tap . Ongoing calls • To change the ear speaker volume during a call or .
1 2 To play a song From the Home screen on your SmartWatch 2, find and tap Tap . • To adjust the audio volume When music is playing, tap • To move between tracks Swipe left or right. or . . 14 This is an Internet version of this publication. © Print only for private use.
Support and maintenance Updating your SmartWatch 2 Update your SmartWatch 2 to the most recent software version to get optimal performance and the latest enhancements. 1 2 3 4 To update the Smart Connect application from your Android™ device From your Home screen, tap . Find and tap Smart Connect, then tap > App info. Tap > Check for updates. If an update is available, follow the instructions that appear on the screen.
Important information Protecting your SmartWatch 2 from water To maximise the water resistance of your SmartWatch 2, the cover for the micro USB port must be firmly closed. Avoid exposing your SmartWatch 2 to environments with excessive dust or moisture. Normal wear and tear along with damage to your SmartWatch 2 can reduce its ability to resist dust or moisture.
IP4X. Protected against solid objects > 1 mm in diameter IPX4. Protected against splashing water IP5X. Protected against dust; limited ingress (no harmful deposit) IPX5. Protected against water jet spray IP6X. Dust tight IPX6. Protected against heavy jet spray IPX7. Protected against the effects of immersion IPX8. Protected against submersion Legal information SonySW2 Prior to use, please read the Important information leaflet separately provided.
FCC Statement This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Any change or modification not expressly approved by Sony may void the user's authority to operate the equipment.