User Guide
Table Of Contents
- Table of Contents
- Overview
- Preparation
- Operating the Camera
- Administrator and User
- Logging in to the System
- Configuration of Main Viewer
- Main menu
- Control panel section
- Monitor image
- Plug-in free viewer
- Using SolidPTZ function
- Controlling via the control panel (Operation common to Area zoom mode and Vector dragging mode)
- Panning and tilting by clicking the monitor image (Area zoom mode only)
- Panning, tilting and zooming by specifying the area (Area zoom mode only)
- Panning and tilting by dragging the screen (Vector dragging mode only)
- Moving the camera to a preset position (Common operations in Area zoom and Vector dragging modes)
- Using pan/tilt/zoom operations with the displayed control bar (PTZ Control bar only)
- Controlling the Camera on a Full Image
- Using the Trigger Button
- Switching TCP/UDP Transmission Mode
- Using the System Utility
- Administrating the Camera
- Basic Operations of the Administrator Menu
- Configuring the System - System Menu
- Setting the Camera Image - Camera Menu
- Configuring the Network - Network Menu
- Setting the SSL function - SSL Menu
- Using the 802.1X Authentication Function - 802.1X Menu
- Setting the User - User Menu
- Setting the Security - Security Menu
- Saving the Camera Position and Action - Preset position Menu
- Sending an Image via E-mail - e-Mail (SMTP) Menu
- Sending Images to FTP Server - FTP Client Menu
- Setting the Operations from the Viewer - Trigger Menu
- Setting the Schedule - Schedule Menu
- Setting the Sensor input/Camera tampering detection/Motion detection - Event detection Menu
- Configuring the Viewer - Viewer Menu
- Others
- Using the SNC toolbox
- Starting SNC toolbox
- How to use SNC toolbox
- Registering in My device
- Changing the Device list display method
- Setting SNC toolbox options
- Using the Custom Homepage - Setting the customized homepage
- Using the Firmware Upgrade
- Using the Schedule Task
- Configuring the device setting
- Camera restart and initialization
- Assigning the IP Address to the Camera Using ARP Commands
- Using the SNMP
- Glossary
- Index
- Using the SNC toolbox
Administrating the Camera
Configuring the Viewer — Viewer Menu
78
Still image: JPEG still images are acquired from the
camera and displayed at start-up.
Specified image (URL): Specify a still image of your
choice by URL at start-up.
Auto play: Run to start playback.
Blank: No display at start-up.
Click to start streaming: By ticking this when Still
image or Specified image is selected, you can start
play by clicking on the image.
Tip
If the menu display is Off, Blank cannot be selected.
Initial sound
Set the initial volume for when streaming starts. Check
Muting for muting sound.
Note
This setting is valid only when SNC ActiveX viewer is
selected for Streaming method from Setting of the
Plug-in free viewer control bar. However, this unit is not
equipped with audio functions.
Show menu
Set whether to show or hide operation buttons at the
bottom of the camera image area.
Select On to display the menu, select Off to hide the
menu.
When On is selected, the items below can be set:
Streaming: Displays the setting options of Streaming,
if it is checked.
Image size: Displays the setting menu of Image size, if
it is checked.
Frame rate: Displays the setting menu of Frame rate,
if it is checked.
Preset position: Displays the setting menu of Preset
position, if it is checked.
Trigger: Displays the setting options of Trigger, if it is
checked.
PTZ operation: Displays the setting menu of PTZ
operation mode, if it is checked.
Sound: Displays the setting menu of Sound, if it is
checked.
Note
This unit is not equipped with audio functions.
Capture image: Displays the Capture image button, if
it is checked.
Image codec: Displays the setting menu of Image
codec, if it is checked.
OK/Cancel
See “Buttons common to every menu” on page 32.
HTML output tab
If the monitor is for personal use, this tab can be used to
output sample source for HTML and script.
For details on the setting, refer to “Monitor” of the
Layout tab.
Monitor
Displays a preview.
Preview: Displays a preview on the monitor based on
the current settings.
Default: Resets the setting to that set in Viewer - Layout
tab.
Note
The selected image size is not used for the preview
screen.
Embedded script
Displays the sample source for script.
HTML sample
Displays the sample source for HTML.