User Guide

Others
Using the SNC toolbox
88
Camera restart and initialization
You can restart and initialize (restore factory default) a
selected camera. Multiple devices can be selected
simultaneously for restart and initialization.
Restarting a camera
Click Tools, Initialize Device and Reboot in this order
on the menu bar to restart the camera.
Camera “Setting the Camera Image —
Camera Menu” on page 38
Picture “Picture Tab” on page 38
Day/Night “Day/Night Tab” on page 40
Video codec “Video codec Tab” on
page 40
Streaming “Streaming Tab” on page 43
Network “Configuring the Network
— Network Menu” on
page 44
Network “Network Tab” on page 44
QoS “QoS Tab” on page 45
IP address
notification
“Dynamic IP address
notification Tab —
Notifying the IP Address”
on page 47
SSL “Setting the SSL function
— SSL Menu” on page 49
Common “Common tab” on page 49
CA certificate “CA certificate tab —
Adding the CA certificate
for client authentication” on
page 51
802.1X “Using the 802.1X
Authentication Function —
802.1X Menu” on page 54
Common “Common Tab — Basic
setting of 802.1X
authentication function” on
page 54
Client certificate “Client certificate Tab” on
page 55
CA certificate “CA certificate Tab” on
page 56
User “Setting the User — User
Menu” on page 60
Security “Setting the Security —
Security Menu” on page 61
Preset position “Saving the Camera
Position and Action —
Preset position Menu” on
page 61
Position “Position Tab — Saving
pan/tilt/zoom position” on
page 61
Preset tour “Preset tour Tab — Setting a
position tour” on page 63
Setting items Pages to refer to in
“Administrating the
Camera”
e-Mail (SMTP) “Sending an Image via E-
mail — e-Mail (SMTP)
Menu” on page 64
Common “Common Tab — Setting
the e-Mail (SMTP)
Function” on page 64
Alarm sending “Alarm sending Tab —
Setting the e-mail sending
mode when detecting the
alarm” on page 66
Periodical sending “Periodical sending Tab —
Setting the periodical e-mail
sending mode” on page 67
FTP client “Sending Images to FTP
Server — FTP Client
Menu” on page 68
Common “Common Tab — Setting
the FTP client function” on
page 68
Alarm sending “Alarm sending Tab —
Setting the FTP client action
when detecting the alarm”
on page 68
Periodical sending “Periodical sending Tab —
Setting the periodical FTP
client activity” on page 69
Trigger “Setting the Operations
from the Viewer — Trigger
Menu” on page 71
Event detection “Setting the Sensor input/
Camera tampering
detection/Motion detection
— Event detection Menu”
on page 73
Sensor input “Sensor input tab — Set the
sensor input” on page 73
Camera tampering
detection
“Camera tampering
detection tab — Set the
camera tampering
detection” on page 73
Motion detection “Motion detection tab —
Set the motion detection” on
page 73
Setting items Pages to refer to in
“Administrating the
Camera”