User Guide
Table Of Contents
- Table of Contents
- Overview
- Operating the Camera
- Administrator and User
- Logging in to System
- Configuration of Main Viewer
- Main menu
- Control panel section
- Monitor image
- Plug-in free viewer
- Using Solid PTZ function
- Controlling via the control panel (Operation common to Area zoom mode and Vector dragging mode)
- Panning and tilting by clicking the monitor image (Area zoom mode only)
- Panning, tilting and zooming by specifying the area (Area zoom mode only)
- Panning and tilting by dragging the screen (Vector dragging mode only)
- Switching Transmission Mode
- Administrating the Camera
- Basic Operations of the Administrator Menu
- Configuring the System - System Menu
- Setting the Camera Image and Audio - Video / Audio Menu
- Configuring the Network - Network Menu
- Setting the Security - Security Menu
- Setting the PTZ control - PTZ control Menu
- Setting the Sensor input/Camera tampering detection/Motion detection - Action input Menu
- Event condition Tab
- Sensor input Tab - Set the sensor input 1/2
- Camera tampering detection Tab - Set the camera tampering detection
- Motion detection Tab - Set the motion/VMF detection
- What is VMF
- Setting items for motion detection
- VMF settings
- Network disconnection Tab - Monitoring the connection of a specified IP address
- Setting the Action output - Action output Menu
- Setting the Schedule - Schedule Menu
- Others
Operating the Camera
Logging in to System
8
Logging in to System
Logging in as a user
1
Start the Web browser on your computer and type
the IP address of the camera you want to monitor.
The viewer is displayed.
Display sample:
Two types of viewer are available: ActiveX viewer
and Plug-in free viewer.
Note
If the main viewer does not start correctly, the security
level of the Internet Explorer may be set to higher than
Medium. See “To display the viewer correctly” on
page 5 and check the security level.
About Viewers
You can use the following viewers.
ActiveX viewer
This viewer can monitor the camera image in any of the
JPEG and H.264 video codecs.
You must install this viewer when you access the main
viewer for the first time.
When you display the main viewer of the
camera for the first time
When you access the network camera using ActiveX
viewer for the first time, the Security Warning appears.
Click Ye s and install ActiveX Control. You can use all
the functions of the viewer with ActiveX Control.
Plug-in free viewer
This viewer enables a browser other than Internet
Explorer to display images.
Notes
• If Automatic configuration is enabled in the Local
Area Network (LAN) Settings of Internet Explorer,
the camera image may not be displayed. In that case,
disable Automatic configuration and set the proxy
server manually. For the setting of the proxy server,
consult your network administrator.
• When you install ActiveX Control, you should be
logged in to the computer as the Administrator.
Tip
Every page of this software is optimized for Internet
Explorer in Medium font.