3-299-319-11 (1) Bluetooth Audio System Bluetooth™ Audio System Operating Instructions GB Bedienungsanleitung DE Mode d’emploi FR Istruzioni per l’uso IT Gebruiksaanwijzing NL To cancel the demonstration (DEMO) display, see page 20. Zum Deaktivieren der Demo-Anzeige (DEMO) schlagen Sie bitte auf Seite 21 nach. Pour annuler la démonstration (DEMO), reportez-vous à la page 22. Per annullare la dimostrazione (DEMO), vedere pagina 21. Om de demonstratie (DEMO) te annuleren, zie pagina 22.
Be sure to install this unit in the dashboard of the car for safety. For installation and connections, see the supplied installation/ connections manual. This label is located on the bottom of the chassis. The nameplate indicating operating voltage, etc., is located on the bottom of the chassis.
The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Sony Corporation is under license. Other trademarks and trade names are those of their respective owners. Microsoft, Windows Media, and the Windows logo are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. Warning if your car’s ignition has no ACC position Be sure to set the Auto Off function (page 20).
Table of Contents Welcome ! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Bluetooth function Getting Started Bluetooth operations . . . . . . . . . . . . . . . . . . . . 15 Pairing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 About Bluetooth icons . . . . . . . . . . . . . . . . 16 Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 To switch the Bluetooth signal output of this unit to on . . . . . . . . . . . . . . . . . . . . . . . . . .
Caution Welcome ! Thank you for purchasing this Sony Bluetooth™ Audio System. You can enjoy your drive with the following functions. • CD playback You can play CD-DA (also containing CD TEXT) and CD-R/CD-RW (MP3/WMA/AAC files (page 23)).
Emergency calls This Bluetooth car handsfree and the electronic device connected to the handsfree operate using radio signals, cellular, and landline networks as well as user-programmed function, which cannot guarantee connection under all conditions. Therefore do not rely solely upon any electronic device for essential communications (such as medical emergencies).
Tip You can set the clock automatically with the RDS feature (page 14). Attaching the front panel Engage part A of the front panel with part B of the unit, as illustrated, and push the left side into position until it clicks. Adjusting the volume level of each device When connecting to a portable audio device via Bluetooth connection or AUX input jack, we recommend adjusting the volume level of the connected device, or adjusting the volume level for each connected device in the setup menu on this unit.
Location of controls and basic operations Main unit 1 23 4 5 6 7 8 OFF BROWSE PUSH SELECT / SOURCE SEEK SEEK BACK MODE BLUETOOTH BT ALBUM PTY AF / TA 1 2 REP SHUF MIC PAUSE SCRL 3 4 5 6 DSPL 9 q; qa qs qd qfqg ql qh qj AUX qk w; RESET This section contains instructions on the location of controls and basic operations. For details, see the respective pages. For USB device operation, see “USB devices” on page 14.
Radio: To tune in stations automatically (press); find a station manually (press and hold). Bluetooth audio device*1: To skip tracks (press). M MODE button page 12 To select the radio band (FM/MW/LW); select the play mode of ATRAC Audio Device. N BLUETOOTH button page 15 For Bluetooth signal on/off, pairing. O AF (Alternative Frequencies)/ TA (Traffic Announcement)/ PTY (Program Type) button page 13, 14 To set AF and TA (press); select PTY (press and hold) in RDS.
Card remote commander RM-X304 1 2 3 OFF SOURCE ATT SEL MODE 6 7 8 + – 4 5 SCRL DSPL 1 2 3 4 5 6 I M (+)/m (–) buttons To control CD/USB, the same as (1)/(2) (ALBUM –/+) on the unit. Setup, sound setting, etc., can be operated by M m. 9 J SCRL (scroll) button To scroll the display item. 0 K Number buttons To receive stored stations (press); store stations (press and hold).
Searching for a track — Quick-BrowZer You can search for a track in a CD or USB device (“Walkman”/Mass Storage Class) easily by category. (BROWSE): To enter/exit the Quick-BrowZer mode. OFF BROWSE PUSH SELECT / SOURCE SEEK SEEK BACK Control dial: To select the item (rotate); confirm the item (press). MODE BLUETOOTH BT (BACK): To return to the previous display. 1 Press (BROWSE). The unit enters the Quick-BrowZer mode, and the list of search categories appears.
CD Radio Storing and receiving stations Display items Caution When tuning in stations while driving, use Best Tuning Memory (BTM) to prevent an accident. A Source B Track number/Elapsed playing time, Disc/ artist name, Album number*, Album name, Track name, Text information, Clock Storing automatically — BTM 1 Press (SOURCE) repeatedly until “TUNER” appears. To change the band, press (MODE) repeatedly. You can select from FM1, FM2, FM3, MW or LW. 2 Press and hold the select button.
RDS Setting AF and TA 1 Overview FM stations with Radio Data System (RDS) service send inaudible digital information along with the regular radio program signal. Display items A TA/TP*1 B Radio band, Function, Frequency*2 (Program service name), Preset number, Clock, RDS data *1 “TA” flashes during traffic information. “TP” lights up while such a station is received. *2 While receiving the RDS station, “ *” is displayed on the left of the frequency indication. To change display items B, press (DSPL).
Local Link function (UK only) This function enables you to select other local stations in the area, even if they are not stored on your number buttons. 1 During FM reception, press a number button ((1) to (6)) on which a local station is stored. 2 Within 5 seconds, press again a number button of the local station. Repeat this procedure until the local station is received. USB devices USB device playback 1 Connect the USB device to the USB terminal.
Listening to music on a Mass Storage Class type audio device Bluetooth function Bluetooth operations Repeat and shuffle play 1 During playback, press (3) (REP) or (4) (SHUF) repeatedly until the desired setting appears. Select To play TRACK track repeatedly. ALBUM album repeatedly. SHUF ALBUM album in random order. SHUF DEVICE device in random order. To return to normal play mode, select “ or “SHUF OFF.
4 If Passcode* input is required on the display of the device to be connected, input “0000.” Connection If pairing has already been achieved, start operation from here. Input passcode. XXXX “0000” To switch the Bluetooth signal output of this unit to on To use the Bluetooth function, switch the Bluetooth signal output of this unit to on. This unit and the Bluetooth device memorize each other’s information, and when pairing is made, the unit is ready for connection to the device.
Connecting an audio device Making calls 1 Be sure that both this unit and the audio device are switched to Bluetooth signal on. In the case of making calls from this unit, redial is used. 2 Connect to this unit using the audio device. “ ” appears when the connection is made. 1 Press (SOURCE) repeatedly until “BT PHONE” appears. 2 Press and hold (handsfree) for 3 seconds or more. The phone call starts.
Notes • Check that unit and cellular phone are connected beforehand. • Store a voice tag on your cellular phone beforehand. • If you activate voice dialing with a cellular phone connected to this unit, this function may not always work in some cases. • Noises such as the engine running may interfere with sound recognition. In order to improve recognition, operate under conditions where noise is minimized.
Other functions Changing the sound settings Adjusting the sound characteristics 1 Press the select button repeatedly until the desired item appears. 2 Rotate the volume control dial to adjust the selected item. After 3 seconds, the setting is complete and the display returns to normal play/reception mode. Customizing the equalizer curve — EQ3 “CUSTOM” of EQ3 allows you to make your own equalizer settings. 1 Select a source, then press the select button repeatedly to select “EQ3.
The following items can be set (follow the page reference for details): “z” indicates the default settings. CLOCK-ADJ (Clock Adjust) (page 6) CT (Clock Time) To set “CT-ON” or “CT-OFF” (z) (page 13, 14). BEEP To set “BEEP-ON” (z) or “BEEP-OFF.” RM (Rotary Commander) To change the operative direction of the rotary commander controls. – “RM NORM” (z): to use the rotary commander in the factory-set position. – “RM REV”: when you mount the rotary commander on the right side of the steering column.
Adjust the volume level Be sure to adjust the volume for each connected audio device before playback. 1 Turn down the volume on the unit. 2 Press (SOURCE) repeatedly until “AUX” appears. “AUX FRONT IN” appears. 3 Start playback of the portable audio device at a moderate volume. 4 Set your usual listening volume on the unit. 5 Press the select button repeatedly until “AUX” appears, and rotate the control dial to adjust the input level (–8 dB to +18 dB).
Additional Information Precautions • If your car has been parked in direct sunlight, allow the unit to cool off before operating it. • Power antenna (aerial) will extend automatically while the unit is operating. Moisture condensation On a rainy day or in a very damp area, moisture condensation may occur inside the lenses and display of the unit. Should this occur, the unit will not operate properly. In such a case, remove the disc and wait for about an hour until the moisture has evaporated.
About USB devices About MP3 files • Mass Storage Class and ATRAC Audio Device type USB devices compliant with the USB standard can be used. However, this unit cannot recognize USB devices via a USB HUB. For details on the compatibility of your USB device, visit the Sony support website (page 27). • Corresponding codec is different according to device type. – Mass Storage Class: MP3/WMA/AAC – ATRAC Audio Device: ATRAC/MP3/WMA/ AAC • DRM (Digital Rights Management) files other than ATRAC cannot be played.
About ATRAC files ATRAC3plus format ATRAC3, which stands for Adaptive Transform Acoustic Coding3, is audio compression technology. It compresses audio CD data to approximately 1/10 of its original size. ATRAC3plus, which is an extended format of ATRAC3, compresses the audio CD data to approximately 1/20 of its original size. The unit accepts both ATRAC3 and ATRAC3plus format. The characters for text information written by SonicStage are displayed.
Cleaning the connectors Maintenance Replacing the lithium battery of the card remote commander Under normal conditions, the battery will last approximately 1 year. (The service life may be shorter, depending on the conditions of use.) When the battery becomes weak, the range of the card remote commander becomes shorter. Replace the battery with a new CR2025 lithium battery. Use of any other battery may present a risk of fire or explosion.
2 Remove the unit. Wireless Communication 1 Insert both release keys simultaneously until they click. Communication System: Bluetooth Standard version 2.0 Output: Bluetooth Standard Power Class 2 (Max. +4 dBm) Maximum communication range: Line of sight approx. 10 m (33 ft)*1 Frequency band: 2.4 GHz band (2.4000 – 2.4835 GHz) Modulation method: FHSS Compatible Bluetooth Profiles*2: A2DP (Advanced Audio Distribution Profile) AVRCP (Audio Video Remote Control Profile) HFP (Handsfree Profile) 1.
MPEG Layer-3 audio coding technology and patents licensed from Fraunhofer IIS and Thomson. This product is protected by certain intellectual property rights of Microsoft Corporation. Use or distribution of such technology outside of this product is prohibited without a license from Microsoft or an authorized Microsoft subsidiary.
The display disappears from/does not appear in the display window. • The dimmer is set “DIM-ON” (page 20). • The display disappears if you press and hold (OFF). t Press and hold (OFF) on the unit until the display appears. • The connectors are dirty (page 25). The Auto Off function does not operate. The unit is turned on. The Auto Off function activates after turning off the unit. t Turn off the unit. Card remote commander operation is not possible. Make sure the insulation film has been removed (page 6).
A beep sounds. During playback, the USB device has been disconnected. t Before disconnecting a USB device, make sure to stop playback first for data protection. The sound is intermittent. The sound may be intermittent at a high-bit-rate of more than 320 kbps. Bluetooth function The connecting device cannot detect this unit. • Before the pairing is made, set this unit to pairing standby mode. • While connected to a Bluetooth device, this unit cannot be detected from another device.
L. SEEK +/– The local seek mode is on during automatic tuning. NO AF There is no alternative frequency for the current station. t Press (SEEK) –/+ while the program service name is flashing. The unit starts searching for another frequency with the same PI (Program Identification) data (“PI SEEK” appears). NO INFO Text information is not written in the MP3/WMA/ AAC file. NO MUSIC The disc/USB device does not contain a music file. t Insert a music CD in this unit.
Wichtig! Bitte nehmen Sie sich etwas Zeit, um den Geräte-Pass vollständig auszufüllen. Dieser befindet sich auf der hinteren Umschlagseite dieser Bedienungsanleitung. Montieren Sie dieses Gerät aus Sicherheitsgründen im Armaturenbrett des Fahrzeugs. Zur Installation und zum Anschluss siehe die mitgelieferte Installations-/Anschlussanleitung. Dieses Etikett befindet sich an der Unterseite des Gehäuses. Das Typenschild mit Betriebsspannung usw. befindet sich an der Geräteunterseite.
Der Bluetooth-Schriftzug und die BluetoothLogos sind Eigentum von Bluetooth SIG, Inc., und ihre Verwendung durch die Sony Corporation erfolgt in Lizenz. Andere Markenzeichen und Produktnamen sind Eigentum der jeweiligen Rechteinhaber. Microsoft, Windows Media und das Windows-Logo sind Markenzeichen oder eingetragene Markenzeichen der Microsoft Corporation in den USA und/oder anderen Ländern.
Inhalt Willkommen!. . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Vorbereitungen Zurücksetzen des Geräts . . . . . . . . . . . . . . . . . . 6 Vorbereiten der Kartenfernbedienung . . . . . . . . 6 Einstellen der Uhr . . . . . . . . . . . . . . . . . . . . . . . 6 Einstellen der Lautstärke der einzelnen Geräte . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Abnehmen der Frontplatte . . . . . . . . . . . . . . . . . 7 Anbringen der Frontplatte. . . . . . . . . . . . . . .
Willkommen! Danke, dass Sie sich für diese Bluetooth™Audioanlage von Sony entschieden haben. Mit diesem Gerät stehen Ihnen im Auto die folgenden Funktionen zur Verfügung. • CD-Wiedergabe Wiedergabe von CD-DAs (auch solche mit CD TEXT) und CD-Rs/CD-RWs (MP3-/WMA-/ AAC-Dateien (Seite 25)). CD-Typ Beschriftung auf der CD CD-DA MP3 WMA AAC • Radioempfang – Für jeden Frequenzbereich (FM1 (UKW1), FM2 (UKW2), FM3 (UKW3), MW und LW) können Sie bis zu 6 Sender speichern.
Hochfrequenzstrahlung HF-Signale beeinträchtigen möglicherweise nicht ordnungsgemäß installierte oder unzureichend abgeschirmte elektronische Systeme in Kraftfahrzeugen, wie z. B. elektronische Kraftstoffeinspritzsysteme, elektronische Antiblockiersysteme, elektronische Geschwindigkeitsregelsysteme oder AirbagSysteme. Zur Installation oder Wartung dieses Geräts wenden Sie sich bitte an den Fahrzeughersteller oder einen Vertreter des Herstellers.
5 Drücken Sie die Auswahltaste. Der Einstellvorgang ist damit abgeschlossen und die Uhr beginnt zu laufen. Zum Einblenden der Uhrzeit drücken Sie (DSPL). Drücken Sie (DSPL) erneut, um zur vorherigen Anzeige zurückzuschalten. Tipp Mithilfe der RDS-Funktion können Sie die Uhr auch automatisch einstellen lassen (Seite 14).
Lage und Grundfunktionen der Teile und Bedienelemente Hauptgerät 1 23 4 5 6 7 8 OFF BROWSE PUSH SELECT / SOURCE SEEK SEEK BACK MODE BLUETOOTH BT ALBUM PTY AF / TA 1 9 q; qa qs qd qfqg ql 2 REP SHUF MIC PAUSE SCRL 3 4 5 6 DSPL qh qj AUX qk w; RESET In diesem Abschnitt werden Lage und Grundfunktionen der Teile und Bedienelemente beschrieben. Nähere Erläuterungen finden Sie auf den jeweiligen Seiten.
L Tasten SEEK –/+ CD/USB: Überspringen von Titeln (drücken), Überspringen mehrerer Titel hintereinander (drücken, dann innerhalb von 1 Sekunde erneut drücken und gedrückt halten) bzw. Rückwärts-/Vorwärtssuchen in einem Titel (gedrückt halten). Radio: Automatisches Einstellen von Sendern (drücken) bzw. manuelle Sendersuche (gedrückt halten). Bluetooth-Audiogerät*1: Überspringen von Titeln (drücken). M Taste MODE Seite 12 Auswählen des Radiofrequenzbereichs (FM (UKW)/MW/LW) bzw.
Kartenfernbedienung RM-X304 1 2 3 OFF SOURCE ATT SEL MODE 6 7 8 + 9 – 4 5 SCRL DSPL 1 2 3 4 5 6 0 qa + VOL – Die folgenden Tasten auf der Kartenfernbedienung unterscheiden sich außerdem hinsichtlich ihres Namens bzw. ihrer Funktion von denen am Gerät. Ziehen Sie vor dem Gebrauch die Isolierfolie heraus (Seite 6). A Taste OFF Ausschalten bzw. Stoppen der Tonquelle. B Taste SOURCE Einschalten bzw. Wechseln der Tonquelle (Radio/CD/USB/AUX/Bluetooth-Audio/ Bluetooth-Telefon). C Tasten < (.
Suchen nach einem Titel — Quick-BrowZer Sie können anhand der Kategorie mühelos nach einem Titel auf einer CD oder einem USB-Gerät („Walkman“/Massenspeicherklasse) suchen. (BROWSE): Aktivieren/Deaktivieren des Quick-BrowZer-Modus. OFF BROWSE PUSH SELECT / SOURCE SEEK SEEK BACK MODE Steuerregler: Auswählen einer Option (drehen) bzw. Bestätigen der Option (drücken). BLUETOOTH BT (BACK): Zurückschalten zur vorherigen Anzeige. 1 Drücken Sie (BROWSE).
CD Radio Informationen im Display Speichern und Empfangen von Sendern Achtung A Tonquelle B Titelnummer/Verstrichene Spieldauer, CD-/ Interpretenname, Albumnummer*, Albumname, Titelname, Textinformationen, Uhrzeit Wenn Sie während der Fahrt Sender einstellen, sollten Sie die BTM-Funktion (Speicherbelegungsautomatik) verwenden. Andernfalls besteht Unfallgefahr.
Automatisches Einstellen von Sendern 1 Wählen Sie den Frequenzbereich aus und starten Sie mit (SEEK) –/+ die Suche nach dem Sender. Der Suchlauf stoppt, wenn ein Sender empfangen wird. Wiederholen Sie diesen Vorgang, bis das Gerät den gewünschten Sender empfängt. Tipp Wenn Sie die Frequenz des gewünschten Senders kennen, halten Sie (SEEK) –/+ gedrückt, bis die Frequenz in etwa erreicht ist, und drücken Sie (SEEK) –/+ dann so oft, bis die gewünschte Frequenz genau eingestellt ist (manuelle Sendersuche).
Empfangen von Katastrophenwarnungen Wenn AF oder TA aktiviert ist, unterbrechen Katastrophenwarnungen automatisch die ausgewählte Tonquelle.* Auswählen des Programmtyps (PTY) 1 Halten Sie während des UKWEmpfangs (AF/TA) (PTY) gedrückt. * Nicht während eines Anrufs Tipp Wenn Sie die Lautstärke während einer Verkehrsdurchsage einstellen, wird der eingestellte Pegel für spätere Verkehrsdurchsagen gespeichert, und zwar unabhängig von der sonst eingestellten Lautstärke.
USB-Geräte Informationen im Display Wiedergabe mit einem USB-Gerät 1 Schließen Sie das USB-Gerät an den USB-Anschluss an. A ATRAC-Audiogerät: AAD Massenspeicherklasse: USB B Titel-/Album-/Interpreten-/Playlist-/ Genrenummer, Titel-/Album-/Interpreten-/ Playlist-/Genrename, verstrichene Spieldauer, Uhrzeit Zum Wechseln der angezeigten Informationen B drücken Sie (DSPL). Die Wiedergabe beginnt.
Wiedergeben von Musik auf einem „Walkman“ (ATRAC-Audiogerät) 1 Drücken Sie (MODE) während der Wiedergabe so oft, bis die gewünschte Einstellung angezeigt wird. Die Anzeige wechselt folgendermaßen: ALBUM t TRACK t GENRE t PLAYLIST t ARTIST Repeat und Shuffle Play 1 Drücken Sie während der Wiedergabe so oft (3) (REP) oder (4) (SHUF), bis die gewünschte Einstellung im Display angezeigt wird. Einstellung TRACK Wiederholtes Wiedergeben eines Titels. ALBUM Wiederholtes Wiedergeben eines Albums.
3 Starten Sie am Bluetooth-Gerät die Suche nach diesem Gerät. Die Liste der erkannten Geräte erscheint im Display des Geräts, zu dem eine Verbindung hergestellt werden soll. Dieses Gerät wird an dem Gerät, zu dem eine Verbindung hergestellt werden soll, als „XPLOD“ angezeigt. Die Bluetooth-Symbole Bei diesem Gerät werden die folgenden Symbole verwendet.
Herstellen einer Verbindung zu dem zuletzt verbundenen Mobiltelefon von diesem Gerät aus Herstellen einer Verbindung zu dem zuletzt verbundenen Audiogerät von diesem Gerät aus 1 Vergewissern Sie sich, dass das BluetoothSignal an diesem Gerät und am Mobiltelefon eingeschaltet ist. 2 Drücken Sie (SOURCE) so oft, bis „BT PHONE“ erscheint. 3 Drücken Sie (Freisprechen). „ “ blinkt, während die Verbindung hergestellt wird. „ “ leuchtet stetig, wenn die Verbindung hergestellt wurde.
Tätigen von Anrufen Beim Tätigen von Anrufen von diesem Gerät aus steht die Wahlwiederholung zur Verfügung. 1 Drücken Sie (SOURCE) so oft, bis „BT PHONE“ erscheint. 2 Halten Sie (Freisprechen) mindestens 3 Sekunden lang gedrückt. Das Telefongespräch beginnt. So beenden Sie einen Anruf Drücken Sie erneut (Freisprechen) oder drücken Sie (OFF). Zum Anwählen einer anderen Telefonnummer verwenden Sie zunächst Ihr Mobiltelefon und leiten den Anruf dann weiter.
Steuern eines Audiogeräts mit diesem Gerät Sie können die folgenden Funktionen an diesem Gerät ausführen, wenn das Audiogerät das Bluetooth-Profil AVRCP (Audio Video Remote Control Profile) unterstützt. Das Vorgehen hängt vom Audiogerät ab. Funktion Taste Wiedergabe (6) (PAUSE)* an diesem Gerät. Unterbrechen (6) (PAUSE)* an diesem der Wiedergabe Gerät. (Pause) Überspringen von Titeln SEEK –/+ (./>) [pro Titel einmal drücken] * Bei manchen Geräten muss die Taste zweimal gedrückt werden.
BTA*3 Zum Einstellen der Lautstärke der einzelnen verbundenen Bluetooth-Audiogeräte. Wenn Sie die Einstellung hier vornehmen, brauchen Sie die Lautstärke der einzelnen Tonquellen nicht mehr einzustellen (Seite 19). Einstellbereich: „+18 dB“ – „0 dB“ (z) – „–8 dB“ *1 Wenn EQ3 eingeschaltet ist. *2 Wenn die AUX-Tonquelle aktiviert ist. *3 Wenn die Bluetooth-Tonquelle aktiviert ist (Seite 19).
DIM (Dimmer) Zum Wechseln der Helligkeit im Display. – „DIM-ON“: Das Display wird dunkler. – „DIM-OFF“ (z): Der Dimmer wird deaktiviert. A.SCRL*2 (Automatischer Bildlauf) Zum Einstellen des automatischen Bildlaufs für lange Informationen beim Wechseln der CD, des Albums oder des Titels. – „A.SCRL-ON“ (z): Die Informationen laufen im Display durch. – „A.SCRL-OFF“: Die Informationen laufen im Display nicht durch. LOCAL (Lokaler Suchmodus) – „LOCAL-ON“: Nur Sender mit starken Signalen werden eingestellt.
Einstellen des Lautstärkepegels Bei folgenden Reglern auf dem Joystick müssen Sie anders als mit dem Gerät vorgehen. Stellen Sie unbedingt vor der Wiedergabe die Lautstärke der einzelnen angeschlossenen Audiogeräte ein. 1 Drehen Sie die Lautstärke an diesem Gerät herunter. 2 Drücken Sie (SOURCE) so oft, bis „AUX“ erscheint. „AUX FRONT IN“ erscheint. 3 Starten Sie die Wiedergabe am tragbaren Audiogerät mit gemäßigter Lautstärke. 4 Stellen Sie die gewohnte Hörlautstärke an diesem Gerät ein.
Weitere Informationen Sicherheitsmaßnahmen • Wenn das Fahrzeug längere Zeit in direktem Sonnenlicht geparkt war, lassen Sie das Gerät etwas abkühlen, bevor Sie es einschalten. • Motorantennen werden automatisch ausgefahren, wenn das Gerät eingeschaltet wird. Feuchtigkeitskondensation Bei Regen oder bei sehr hoher Luftfeuchtigkeit kann sich auf den Linsen im Inneren des Geräts und im Display Feuchtigkeit niederschlagen. In diesem Fall funktioniert das Gerät nicht mehr richtig.
Musik-CDs mit Urheberrechtsschutzcodierung Dieses Gerät ist auf die Wiedergabe von CDs ausgelegt, die dem Compact Disc-Standard (CD) entsprechen. Seit neuestem bringen einige Anbieter Musik-CDs mit Urheberrechtsschutzcodierung auf den Markt. Beachten Sie bitte, dass einige dieser CDs nicht dem CD-Standard entsprechen und mit diesem Produkt möglicherweise nicht wiedergegeben werden können.
AAC-Dateien • AAC steht für Advanced Audio Coding. Dabei handelt es sich um einen Formatstandard zum Komprimieren von Musikdateien. Hierbei werden Audio-CD-Daten auf etwa 1/11* ihrer ursprünglichen Größe komprimiert. • AAC-Tags bestehen aus 126 Zeichen. • Fügen Sie beim Benennen einer AAC-Datei unbedingt die Dateierweiterung „.m4a“ zum Dateinamen hinzu. • Bei der Wiedergabe bzw.
– Auch bei Geräten, die dem oben erwähnten Bluetooth-Standard entsprechen, kann es vorkommen, dass je nach Funktionen oder Spezifikationen der Geräte keine Verbindung hergestellt werden kann oder sie nicht einwandfrei funktionieren. – Wenn Sie freihändig telefonieren, kann je nach Gerät oder Kommunikationsumgebung Störrauschen zu hören sein. • Je nach dem Gerät, zu dem eine Verbindung hergestellt werden soll, kann es eine Weile dauern, bis die Kommunikation startet.
Reinigen der Anschlüsse Das Gerät funktioniert möglicherweise nicht ordnungsgemäß, wenn die Anschlüsse zwischen dem Gerät und der Frontplatte verschmutzt sind. Um dies zu vermeiden, nehmen Sie die Frontplatte ab (Seite 7) und reinigen Sie die Anschlüsse mit einem Wattestäbchen. Drücken Sie dabei nicht zu fest auf die Anschlüsse. Andernfalls können sie beschädigt werden.
USB-Player Schnittstelle: USB (Full-Speed) Maximale Stromstärke: 500 mA Drahtlose Kommunikation Kommunikationssystem: Bluetooth-Standard Version 2.0 Sendeleistung: Bluetooth-Standard Leistungsklasse 2 (max. +4 dBm) Maximale Kommunikationsreichweite: Sichtlinie ca. 10 m*1 Frequenzbereich: 2,4 GHz Frequenzbereich (2,4000 – 2,4835 GHz) Modulationsverfahren: FHSS Kompatible Bluetooth-Profile*2: A2DP (Advanced Audio Distribution Profile) AVRCP (Audio Video Remote Control Profile) HFP (Handsfree Profile) 1.
Störungsbehebung Anhand der folgenden Checkliste können Sie die meisten Probleme, die möglicherweise an Ihrem Gerät auftreten, selbst beheben. Bevor Sie die folgende Checkliste durchgehen, überprüfen Sie bitte zunächst, ob Sie das Gerät richtig angeschlossen und bedient haben. Wenn sich das Problem nicht beheben lässt, besuchen Sie folgende Support-Website.
Tonsprünge treten auf. • Das Gerät ist nicht richtig installiert. t Installieren Sie das Gerät in einem Winkel von unter 45° an einem stabilen Teil des Fahrzeugs. • Die CD ist beschädigt oder verschmutzt. Die Funktionstasten funktionieren nicht. Die CD lässt sich nicht auswerfen. Drücken Sie die Taste RESET (Seite 6). Radioempfang Sender lassen sich nicht empfangen. Der Ton ist stark gestört.
Bluetooth-Funktion Das zu verbindende Gerät kann dieses Gerät nicht erkennen. • Schalten Sie dieses Gerät in den Bereitschaftsmodus für das Pairing, bevor Sie das Pairing vornehmen. • Während eine Verbindung zu einem Bluetooth-Gerät besteht, kann dieses Gerät von einem anderen Gerät nicht erkannt werden. Trennen Sie die aktuelle Verbindung und lassen Sie dann vom anderen Gerät aus nach diesem Gerät suchen. • Schalten Sie die Bluetooth-Signalausgabe ein, wenn das Pairing bereits erfolgt ist (Seite 17).
Fehleranzeigen/Meldungen CHECKING Das Gerät überprüft die Verbindung mit einem USBGerät. t Warten Sie, bis das Überprüfen der Verbindung beendet ist. ERROR • Die CD ist verschmutzt oder wurde falsch herum eingelegt. t Reinigen Sie die CD bzw. legen Sie sie korrekt ein. • Eine leere CD wurde eingelegt. • Die CD kann aufgrund eines Problems nicht wiedergegeben werden. t Legen Sie eine andere CD ein. • Das USB-Gerät wurde nicht automatisch erkannt. t Schließen Sie das Gerät nochmals an.
Pour plus de sécurité, installez cet appareil dans le tableau de bord de votre véhicule. Pour de plus amples informations sur l’installation et les raccordements, reportez-vous au manuel d’installation et de raccordements fourni. Cette étiquette est située sur la partie inférieure du châssis. La plaque signalétique indiquant la tension de fonctionnement, etc., se trouve sous le boîtier de l’appareil.
La marque Bluetooth et les logos appartiennent à Bluetooth SIG, Inc. et sont utilisés sous licence uniquement par Sony Corporation. Les autres marques commerciales et noms commerciaux appartiennent à leurs propriétaires respectifs. Microsoft, Windows Media et le logo Windows sont des marques de commerce ou des marques déposées de Microsoft Corporation aux Etats-Unis et/ou dans d’autres pays.
Table des matières Félicitations ! . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Préparation Réinitialisation de l’appareil . . . . . . . . . . . . . . . 6 Préparation de la mini-télécommande . . . . . . . . 6 Réglage de l’horloge . . . . . . . . . . . . . . . . . . . . . 7 Réglage du volume de chaque appareil . . . . . . . 7 Retrait de la façade . . . . . . . . . . . . . . . . . . . . . . 7 Installation de la façade . . . . . . . . . . . . . . . .
Félicitations ! Nous vous remercions d’avoir fait l’acquisition de ce système audio Bluetooth™ Sony. Vous pouvez profiter de votre trajet grâce aux fonctions ci-dessous. • Lecture de CD Vous pouvez lire des CD-DA (y compris ceux qui contiennent des informations CD TEXT) et des CD-R/CD-RW (fichiers MP3/WMA/AAC (page 25)).
Exposition aux fréquences radio Les signaux RF peuvent perturber des systèmes électroniques automobiles mal installés ou insuffisamment protégés, tels que les systèmes d’injection électronique, les dispositifs d’antiblocage de frein électronique (ABS), les systèmes de contrôle de vitesse électroniques ou les systèmes airbag. Veuillez confier l’installation ou l’entretien de cet appareil au constructeur ou au concessionnaire de votre véhicule.
Réglage de l’horloge L’horloge numérique fonctionne suivant un cycle de 24 heures. 1 Appuyez sur la touche de sélection et maintenez-la enfoncée. L’écran de configuration apparaît. 2 Appuyez plusieurs fois sur la touche de sélection jusqu’à ce que « CLOCKADJ » apparaisse. 3 Appuyez sur (SEEK) +. L’indication des heures clignote. 4 Tournez la molette de réglage pour régler l’heure et les minutes. Pour déplacer l’indication numérique, appuyez sur (SEEK) –/+. 5 Appuyez sur la touche de sélection.
Emplacement des commandes et opérations de base Appareil principal 1 23 4 5 6 7 8 OFF BROWSE PUSH SELECT / SOURCE SEEK SEEK BACK MODE BLUETOOTH BT ALBUM PTY AF / TA 1 9 q; qa qs qd qfqg ql 2 REP SHUF MIC PAUSE SCRL 3 4 5 6 DSPL qh AUX qj qk w; RESET Cette section contient les instructions relatives à l’emplacement des commandes et aux opérations de base. Pour plus de détails, reportez-vous aux numéros de pages correspondants.
L Touches SEEK –/+ CD/USB : Permettent de sauter des plages (appuyez) ; de sauter des plages en continu (appuyez une première fois, puis une seconde fois dans un délai d’environ 1 seconde et maintenez la touche enfoncée) ; d’avancer/de reculer rapidement dans une plage (appuyez sur la touche et maintenez-la enfoncée). Radio : Permettent de régler des stations automatiquement (appuyez) ; de rechercher une station manuellement (appuyez sur la touche et maintenez-la enfoncée).
Mini-télécommande RM-X304 1 2 3 OFF SOURCE ATT SEL MODE 6 7 8 + 9 – 4 5 SCRL DSPL 1 2 3 4 5 6 0 qa + VOL – Les touches suivantes de la mini-télécommande ont également des touches ou des fonctions différentes de celles de l’appareil. Retirez la feuille isolante avant l’utilisation (page 6). A Touche OFF Permet de mettre l’appareil hors tension ; d’arrêter la source.
Recherche d’une plage — Quick-BrowZer Vous pouvez facilement rechercher une plage sur un CD ou un périphérique USB (« Walkman »/ périphérique de stockage de masse) par catégorie. (BROWSE) : Pour activer/désactiver le mode Quick-BrowZer. OFF BROWSE PUSH SELECT / SOURCE SEEK SEEK BACK MODE Molette de réglage : Pour sélectionner un élément (tournez) ; valider la sélection (appuyez). BLUETOOTH BT (BACK) : Pour revenir à l’écran précédent. 1 Appuyez sur (BROWSE).
CD Radio Rubriques d’affichage Mémorisation et réception des stations Attention A Source B Numéro de plage/temps de lecture écoulé, nom du disque/nom de l’artiste, numéro d’album*, nom d’album, nom de la plage, informations textuelles, horloge Pour syntoniser des stations pendant que vous conduisez, utilisez la fonction de mémorisation des meilleurs accords (BTM) afin d’éviter les accidents.
Recherche automatique des fréquences 1 Sélectionnez la bande, puis appuyez sur (SEEK) –/+ pour rechercher la station. Le balayage s’interrompt lorsque l’appareil capte une station. Répétez cette procédure jusqu’à ce que vous captiez la station souhaitée.
Réception de messages d’urgence Lorsque la fonction AF ou TA est activée, les messages d’urgence interrompent automatiquement la source sélectionnée en cours de diffusion.* Sélection de PTY 1 Appuyez sur la touche (AF/TA) (PTY) en cours de réception FM. * sauf en cours d’appel Conseil Si vous réglez le niveau de volume pendant la diffusion d’un message de radioguidage, ce niveau sera enregistré dans la mémoire pour les messages de radioguidage suivants, indépendamment du niveau de volume normal.
Périphériques USB Rubriques d’affichage Lecture de périphériques USB 1 Raccordez le périphérique USB à la borne USB. A Périphérique audio ATRAC : AAD Périphérique de stockage de masse : USB B Numéro de plage/d’album/d’artiste/de liste de lecture/de genre, nom de la plage/de l’album/ de l’artiste/de la liste de lecture/du genre, temps de lecture écoulé, horloge Pour modifier les rubriques d’affichage B, appuyez sur (DSPL). La lecture commence.
Ecoute de musique sur un « Walkman » (périphérique audio ATRAC) 1 En cours de lecture, appuyez plusieurs fois sur (MODE) jusqu’à ce que le réglage souhaité apparaisse. Le paramètre change comme suit : ALBUM t TRACK t GENRE t PLAYLIST t ARTIST Lecture répétée et aléatoire 1 En cours de lecture, appuyez plusieurs fois sur (3) (REP) ou (4) (SHUF) jusqu’à ce que le réglage souhaité apparaisse. Sélectionnez Pour lire TRACK une plage en boucle. ALBUM un album en boucle. ARTIST un artiste en boucle.
3 Réglez le périphérique Bluetooth afin qu’il recherche cet appareil. Une liste des périphériques détectés apparaît dans l’affichage du périphérique à connecter. Cet appareil est désigné par « XPLOD » sur le périphérique à connecter. A propos des icônes Bluetooth Cet appareil utilise les icônes suivantes.
Connexion du dernier téléphone mobile connecté à partir de cet appareil 1 Veillez à ce que le signal Bluetooth soit activé sur cet appareil et sur le téléphone mobile. 2 Appuyez plusieurs fois sur (SOURCE) jusqu’à ce l’indication « BT PHONE » apparaisse. 3 Appuyez sur (mains libres). « » clignote en cours de connexion. « » reste ensuite allumé une fois la connexion établie.
Transfert d’appel Pour activer/désactiver le périphérique adéquat (cet appareil/le téléphone mobile) effectuez les vérifications suivantes. 1 Appuyez sur (mains libres) et maintenez la touche enfoncée ou utilisez votre téléphone mobile. Pour plus de détails sur le fonctionnement du téléphone mobile, reportez-vous au mode d’emploi de ce dernier. Remarque Selon votre téléphone mobile, la connexion mains libres peut être interrompue lorsque vous essayez d’effectuer un transfert d’appel.
Pour Appuyez sur lire (6) (PAUSE)* sur cet appareil. interrompre la (6) (PAUSE)* sur cet appareil. lecture sauter des plages SEEK –/+ (./>) [une fois pour chaque plage] * En fonction du périphérique, il peut être nécessaire d’appuyer deux fois sur la touche. Les opérations autres que celles citées ci-dessus doivent être effectuées à partir du périphérique audio.
BTA*3 Pour régler le niveau de volume de chaque appareil audio Bluetooth connecté. Ce réglage évite de régler le niveau de volume entre les sources (page 19). Niveau pouvant être réglé : « +18 dB » – « 0 dB » (z) – « –8 dB » *1 Lorsque EQ3 est activé. *2 Lorsque la source AUX est activée. *3 Lorsque la source audio Bluetooth est activée (page 19). Personnalisation de la courbe de l’égaliseur — EQ3 Le paramètre « CUSTOM » de EQ3 vous permet d’effectuer vos propres réglages de l’égaliseur.
DEMO (Démonstration) Pour régler « DEMO-ON » (z) ou « DEMOOFF ». DIM (Régulateur de luminosité) Pour modifier la luminosité de l’affichage. – « DIM-ON » : pour réduire la luminosité de l’affichage. – « DIM-OFF » (z) : pour désactiver le régulateur de luminosité. A.SCRL*2 (Défilement automatique) Pour faire défiler automatiquement les rubriques d’affichage longues lorsque le disque, l’album ou la plage est modifié(e). – « A.SCRL-ON » (z) : pour faire défiler les rubriques. – « A.
Satellite de commande RM-X4S Modification du sens de fonctionnement Fixation de l’étiquette Le sens de fonctionnement des commandes est réglé par défaut comme indiqué sur l’illustration ci-dessous. Apposez l’étiquette comportant les indications en fonction de la position de montage du satellite de commande. Pour augmenter Pour diminuer SEL MODE DSPL DSPL MODE SEL Si vous devez monter le satellite de commande du côté droit de la colonne de direction, vous pouvez inverser le sens de fonctionnement.
Informations complémentaires Précautions • Si votre véhicule est resté garé en plein soleil, laissez l’appareil refroidir avant de l’utiliser. • L’antenne électrique se déploie automatiquement lorsque l’appareil est en fonctionnement. Condensation Par temps de pluie ou dans des régions très humides, de l’humidité peut se condenser à l’intérieur des lentilles et dans la fenêtre d’affichage de l’appareil. Si cela se produit, l’appareil ne fonctionne pas correctement.
Disques de musique encodés à l’aide d’une technologie de protection des droits d’auteur Cet appareil est conçu pour la lecture des disques conformes à la norme Compact Disc (CD). Dernièrement, certaines maisons de disques ont lancé sur le marché divers types de disques de musique encodés selon des technologies de protection des droits d’auteur. Notez que, parmi ces types de disques, certains ne sont pas conformes à la norme CD. La lecture de ces disques avec cet appareil peut être impossible.
A propos des fichiers WMA • WMA, qui signifie Windows Media Audio, est une norme de format de compression des fichiers audio. Il comprime les données de CD audio à environ un 1/22e* de leur taille initiale. • L’étiquette WMA compte 63 caractères. • Lors de l’identification d’un fichier WMA, veillez à ajouter l’extension « .wma » au nom de chaque fichier.
• Les émissions d’hyperfréquences d’un périphérique Bluetooth peuvent perturber le fonctionnement des appareils médicaux électroniques. Mettez cet appareil ainsi que les autres périphériques Bluetooth situés dans les endroits suivants hors tension afin d’éviter tout accident : – endroits où du gaz inflammable est présent, dans un hôpital, un train, un avion ou une station service. – à proximité de portes automatiques ou d’alarmes incendie.
Nettoyage des connecteurs L’appareil peut ne pas fonctionner correctement si les connecteurs entre l’appareil et la façade sont souillés. Pour éviter cette situation, enlevez la façade (page 7) et nettoyez les connecteurs à l’aide d’un coton-tige. N’exercez pas une pression excessive, sinon les connecteurs peuvent être endommagés. Appareil principal Arrière de la façade 2 Retirez l’appareil. 1 Insérez simultanément les deux clés de déblocage jusqu’à ce qu’elles émettent un déclic.
Lecteur USB Interface : USB (haute vitesse) Courant maximal : 500 mA Communication sans fil Système de communication : Norme Bluetooth version 2.0 Sortie : Norme Bluetooth Power Class 2 (Max. + 4 dBm) Portée de communication maximale : En ligne directe : environ 10 m*1 Bande de fréquences : Bande de 2,4 GHz (2,4000 à 2,4835 GHz) Méthode de modulation : FHSS Profils Bluetooth compatibles*2 : A2DP (Advanced Audio Distribution Profile) AVRCP (Audio Video Remote Control Profile) HFP (Handsfree Profile) 1.
Dépannage La liste de contrôles suivante vous aidera à remédier aux problèmes que vous pourriez rencontrer avec cet appareil. Avant de passer en revue la liste de contrôles cidessous, vérifiez les procédures de raccordement et d’utilisation. Si le problème persiste, consultez le site d’assistance suivant. Site d’assistance Si vous avez des questions ou si vous souhaitez consulter les toutes dernières informations techniques sur ce produit, rendez-vous sur le site Web suivant : http://support.sony-europe.
Les rubriques d’affichage ne défilent pas. • Pour les disques contenant un grand nombre de caractères, le défilement peut être inopérant. • « A.SCRL » est réglé sur « OFF ». t Réglez « A.SCRL-ON » (page 22). t Appuyez sur la touche (DSPL) (SCRL) et maintenez-la enfoncée. Le son saute. • L’installation est incorrecte. t Installez l’appareil suivant un angle de moins de 45° dans un endroit stable de la voiture. • Le disque est défectueux ou sale. Les touches de commande sont inopérantes.
Impossible d’établir la connexion. • Connectez cet appareil à partir d’un périphérique Bluetooth ou vice versa. La connexion est contrôlée d’un côté (cet appareil ou le périphérique Bluetooth), mais pas des deux. • Vérifiez les procédures de pairage et de connexion en vous reportant au manuel de l’autre périphérique, etc., puis effectuez à nouveau cette opération. Le volume de la voix du correspondant est faible. Réglez le niveau de volume. Un interlocuteur trouve le volume trop faible ou trop élevé.
Affichage des erreurs et messages CHECKING L’appareil confirme le raccordement d’un périphérique USB. t Attendez que la confirmation du raccordement soit terminée. ERROR • Le disque est sale ou inséré à l’envers. t Nettoyez le disque ou insérez-le correctement. • Un disque vierge a été inséré. • Le disque ne peut pas être lu en raison d’un problème. t Insérez-en un autre. • Le périphérique USB n’a pas été automatiquement reconnu. t Rebranchez-le à nouveau. • Appuyez sur Z pour retirer le disque.
Si dichiara che l’apparecchio è stato fabbricato in conformità all’art.2, Comma l del D.M.28.08.1995 n.548. Per motivi di sicurezza, assicurarsi di installare il presente apparecchio sul cruscotto dell’auto. Per l’installazione e i collegamenti, consultare il manuale per l’installazione e i collegamenti in dotazione. Questa etichetta è posta nella parte inferiore esterna. La targhetta indicante la tensione operativa e informazioni simili è situata nella parte inferiore del rivestimento.
Bluetooth e i relativi loghi sono di proprietà di Bluetooth SIG, Inc. L’uso di tali marchi è concesso in licenza a Sony Corporation. Tutti gli altri marchi di fabbrica o nomi commerciali sono di proprietà delle rispettive aziende. Microsoft, Windows Media e il loro Windows sono marchi di fabbrica o marchi registrati di Microsoft Corporation negli Stati Uniti e/o in altri paesi.
Indice Congratulazioni! . . . . . . . . . . . . . . . . . . . . . . . . 5 Operazioni preliminari Azzeramento dell’apparecchio . . . . . . . . . . . . . 6 Preparazione del telecomando a scheda . . . . . . 6 Impostazione dell’orologio . . . . . . . . . . . . . . . . 7 Regolazione del livello di volume di ciascun dispositivo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Rimozione del pannello anteriore . . . . . . . . . . . 7 Installazione del pannello anteriore . . . . . . .
Congratulazioni! Complimenti per l’acquisto del presente sistema audio Bluetooth™ Sony. Durante la guida, è possibile utilizzare le funzioni riportate di seguito. • Riproduzione di CD È possibile riprodurre CD-DA (contenenti inoltre CD TEXT), CD-R/CD-RW (file MP3/ WMA/AAC (pagina 25)). Tipo di disco Etichetta sul disco CD-DA MP3 WMA AAC • Ricezione radiofonica – È possibile memorizzare fino a 6 stazioni per banda (FM1, FM2, FM3, MW e LW).
Esposizione alle radiofrequenze I segnali RF possono influire su sistemi elettronici in automobili installati in modo errato o schermati in modo non adeguato, quali ad esempio sistemi a iniezione diretta elettronici, sistemi ABS antisbandamento (antiblocco) elettronici, sistemi di controllo della velocità elettronici o sistemi con airbag. Per informazioni sull’installazione o l’assistenza del presente dispositivo, consultare il produttore o i rappresentanti dell’automobile in questione.
Impostazione dell’orologio L’orologio mostra l’indicazione digitale dell’ora in base al sistema delle 24 ore. 1 Tenere premuto il tasto di selezione. Viene visualizzato il display di impostazione. 2 Premere più volte il tasto di selezione fino a visualizzare “CLOCK-ADJ”. 3 Premere (SEEK) +. L’indicazione dell’ora lampeggia. 4 Ruotare la manopola di controllo per impostare l’ora e i minuti. Per passare da una cifra all’altra dell’indicazione digitale, premere (SEEK) –/+.
Posizione dei comandi e operazioni di base Unità principale 1 23 4 5 6 7 8 OFF BROWSE PUSH SELECT / SOURCE SEEK SEEK BACK MODE BLUETOOTH BT ALBUM PTY AF / TA 1 9 q; qa qs qd qfqg ql 2 REP SHUF MIC PAUSE SCRL 3 4 5 6 DSPL qh qj AUX qk w; RESET La presente sezione contiene le istruzioni riguardanti la posizione dei comandi e le operazioni di base. Per ulteriori informazioni, vedere le pagine corrispondenti.
L Tasti SEEK –/+ CD/USB: Per saltare i brani (premere); per saltare i brani in modo continuo (premere, quindi premere di nuovo entro 1 secondo e tenere premuto); per fare retrocedere o fare avanzare rapidamente un brano (tenere premuto). Radio: Per sintonizzare le stazioni in modo automatico (premere); per ricercare una stazione manualmente (tenere premuto). Dispositivo audio Bluetooth*1: Per saltare i brani (premere).
Telecomando a scheda RM-X304 1 2 3 OFF SOURCE ATT SEL MODE 6 7 8 + 9 – 4 5 SCRL DSPL 1 2 3 4 5 6 0 qa + VOL – I tasti del telecomando a scheda riportati di seguito corrispondono a tasti/funzioni differenti dell’apparecchio. Prima dell’uso, rimuovere la protezione (pagina 6). A Tasto OFF Per disattivare l’alimentazione; per arrestare la riproduzione della sorgente.
Ricerca di un brano — Quick-BrowZer È possibile effettuare in modo semplice la ricerca di un brano in un CD o in dispositivo USB (“Walkman”/memorizzazione di massa) in base alla categoria. (BROWSE): Per impostare/annullare il modo Quick-BrowZer. OFF BROWSE PUSH SELECT / SOURCE SEEK SEEK BACK MODE Manopola di controllo: Per selezionare una voce (ruotare); per confermare una voce (premere). BLUETOOTH BT (BACK): Per tornare al display precedente. 1 Premere (BROWSE).
CD Radio Memorizzazione e ricezione delle stazioni Voci del display Attenzione A Sorgente B Numero del brano/Tempo di riproduzione trascorso, Nome del disco/Nome dell’artista, Numero dell’album*, Nome dell’album, Titolo del brano, Informazioni di testo, Orologio Per la sintonizzazione delle stazioni durante la guida, utilizzare la funzione BTM (memorizzazione automatica delle emittenti con sintonia migliore) per evitare incidenti.
Sintonizzazione automatica 1 Selezionare la banda, quindi premere (SEEK) –/+ per ricercare la stazione. La ricerca si arresta non appena l’apparecchio riceve una stazione. Ripetere questa procedura fino alla ricezione della stazione desiderata.
Ricezione dei notiziari di emergenza Se è attivato il modo AF o TA, gli annunci di emergenza interrompono automaticamente la riproduzione della sorgente selezionata.* Selezione del modo PTY 1 Tenere premuto (AF/TA) (PTY) durante la ricezione FM. * Eccetto durante una chiamata Suggerimento Se si regola il livello del volume durante un notiziario sul traffico, tale livello viene memorizzato per i successivi notiziari sul traffico, indipendentemente dal normale livello del volume.
Dispositivi USB Voci del display Riproduzione mediante un dispositivo USB 1 Collegare il dispositivo USB al terminale USB. A Dispositivo audio ATRAC: AAD Classe di memorizzazione di massa: USB B Numero del brano/dell’album/dell’artista/ della playlist/del genere, Titolo del brano/ Nome dell’album/dell’artista/della playlist/ del genere, Tempo di riproduzione trascorso, Orologio Per modificare le voci del display B, press (DSPL). Viene avviata la riproduzione.
Ascolto di musica tramite un “Walkman” (dispositivo audio ATRAC) 1 Durante la riproduzione, premere più volte (MODE) fino a visualizzare l’impostazione desiderata. La voce cambia come riportato di seguito: ALBUM t TRACK t GENRE t PLAYLIST t ARTIST Riproduzione ripetuta e in ordine casuale 1 Durante la riproduzione, premere più volte (3) (REP) o (4) (SHUF) fino a visualizzare l’impostazione desiderata. Selezionare Per riprodurre TRACK un brano in modo ripetuto. ALBUM un album in modo ripetuto.
3 Impostare il dispositivo Bluetooth affinché ricerchi il presente apparecchio. Nel display del dispositivo di connessione viene visualizzato un elenco dei dispositivi rilevati. Il presente apparecchio viene denominato “XPLOD” nel display del dispositivo di connessione. Icone Bluetooth Sul presente apparecchio vengono utilizzate le seguenti icone.
Connessione all’ultimo telefono cellulare connesso a partire dall’apparecchio 1 Accertarsi che l’apparecchio e il telefono cellulare siano impostati per la ricezione del segnale Bluetooth. 2 Premere più volte (SOURCE) fino a visualizzare “BT PHONE”. 3 Premere (vivavoce). “ ” lampeggia nel corso del tentativo di connessione. Quindi, “ ” rimane acceso quando la connessione è stabilita.
Trasferimento di chiamata Per attivare o disattivare il dispositivo appropriato (apparecchio/telefono cellulare), attenersi a quanto riportato di seguito. 1 Tenere premuto (vivavoce) oppure utilizzare il telefono cellulare. Per ulteriori informazioni sul funzionamento del telefono cellulare, consultare il relativo manuale. Nota A seconda del telefono cellulare in uso, è possibile che la connessione vivavoce venga interrotta durante il tentativo di trasferimento di chiamata.
Uso di un dispositivo audio tramite il presente apparecchio Altre funzioni Se il dispositivo audio supporta il profilo AVRCP (Audio Video Remote Control Profile) della tecnologia Bluetooth, è possibile eseguire le operazioni riportate di seguito sul presente apparecchio (il funzionamento varia in base al dispositivo audio). Modifica delle impostazioni audio Per Premere Riprodurre (6) (PAUSE)* sul presente apparecchio. Effettuare una pausa (6) (PAUSE)* sul presente apparecchio.
BTA*3 Per regolare il livello del volume di ciascun dispositivo audio Bluetooth connesso. Questa impostazione elimina la necessità di regolare il livello del volume tra sorgenti diverse (pagina 19). Livello regolabile: “+18 dB” – “0 dB” (z) – “–8 dB” *1 Se la funzione EQ3 è attivata. *2 Se è attivata la sorgente AUX. *3 Se è attivata la sorgente audio Bluetooth (pagina 19).
DIM (attenuatore di luminosità) Consente di modificare la luminosità del display. – “DIM-ON”: per attenuare la luminosità del display. – “DIM-OFF” (z): per disattivare l’attenuatore di luminosità. A.SCRL*2 (scorrimento automatico) Consente di fare scorrere automaticamente le voci visualizzate composte da molti caratteri quando si cambia disco/album/brano. – “A.SCRL-ON” (z): per attivare lo scorrimento. – “A.SCRL-OFF”: per disattivare lo scorrimento.
Telecomando a rotazione RM-X4S Applicazione dell’etichetta Applicare l’etichetta delle indicazioni in base al modo in cui si desidera montare il telecomando a rotazione. Modifica della direzione operativa La direzione operativa dei comandi è impostata in fabbrica come illustrato di seguito. Per aumentare Per diminuire SEL MODE DSPL Se si desidera montare il telecomando a rotazione sul lato destro del piantone di guida, è possibile invertire la direzione operativa dei comandi.
Informazioni aggiuntive Precauzioni • Se l’auto è stata parcheggiata in un luogo esposto a luce solare diretta, attendere che l’apparecchio si raffreddi prima di utilizzarlo. • L’antenna elettrica si estende automaticamente durante il funzionamento dell’apparecchio. Formazione di condensa Nei giorni di pioggia o in zone estremamente umide, è possibile che all’interno delle lenti e del display dell’apparecchio si formi della condensa. Di conseguenza, l’apparecchio potrebbe non funzionare correttamente.
Dischi audio codificati mediante tecnologie di protezione dei diritti d’autore Questo prodotto è stato progettato per la riproduzione di dischi conformi allo standard CD (Compact Disc). Recentemente, alcune case discografiche hanno lanciato sul mercato vari dischi audio codificati mediante tecnologie di protezione dei diritti d’autore. Si noti che alcuni di questi dischi non sono conformi allo standard CD e pertanto non è possibile riprodurli utilizzando il presente prodotto.
Informazioni sui file AAC • AAC, l’acronimo di Advanced Audio Coding, è un formato standard di compressione dei file musicali che consente di comprimere i dati audio di un CD fino a circa 1/11* delle dimensioni originali. • Il tag AAC è composto da 126 caratteri. • Durante l’assegnazione di un nome a un file AAC, assicurarsi di aggiungere al nome del file l’estensione “.m4a”.
• Non è possibile garantire la connessione con tutti i dispositivi Bluetooth. – Per la conformità con lo standard Bluetooth specificato da Bluetooth SIG e per l’autenticazione, occorre disporre di un dispositivo dotato della funzione Bluetooth. – Anche se il dispositivo connesso è conforme con lo standard Bluetooth di cui sopra, potrebbe non essere possibile connettere alcuni dispositivi oppure alcuni di essi potrebbero non funzionare correttamente in base alle relative funzioni o specifiche.
2 Pulizia dei connettori Se i connettori tra l’apparecchio e il pannello anteriore sono sporchi, l’apparecchio potrebbe non funzionare correttamente. Per evitare questo problema, aprire il pannello anteriore, rimuoverlo (pagina 7), quindi pulire i connettori con un batuffolo di cotone. Non esercitare forza eccessiva. Diversamente, i connettori potrebbero venire danneggiati. Rimuovere l’apparecchio. 1 Inserire contemporaneamente entrambe le chiavi di rilascio fino a farle scattare in posizione.
* di cui al par. 3 dell’Allegato A al D.M. 25/06/85 e al par. 3 dell’Allegato 1 al D.M. 27/08/87 Lettore USB Interfaccia: USB (velocità massima) Alimentazione massima: 500 mA Comunicazione senza fili Sistema di comunicazione: Bluetooth Standard versione 2.0 Uscite: Bluetooth Standard Power Class 2 (max.
Guida alla soluzione dei problemi Fare riferimento al seguente elenco di verifica per risolvere la maggior parte dei problemi che si potrebbero verificare durante l’uso di questo apparecchio. Prima di esaminare l’elenco che segue, verificare le procedure di collegamento e d’uso dell’apparecchio. Se il problema persiste, visitare il sito di supporto riportato di seguito.
Ricezione radiofonica Non è possibile ricevere le stazioni. L’audio è disturbato. • Collegare il cavo di controllo dell’antenna elettrica (blu) o il cavo di alimentazione accessoria (rosso) al cavo di alimentazione di un amplificatore di potenza dell’antenna per auto (solo se l’auto dispone di antenna FM/MW/LW incorporata sul vetro posteriore/laterale). • Verificare il collegamento dell’antenna dell’auto. • L’antenna dell’auto non si estende.
32 Durante le conversazioni telefoniche si verifica il fenomeno dell’eco o un disturbo. • Abbassare il volume. • Se il rumore ambientale risulta elevato durante la chiamata telefonica, tentare di ridurlo. Esempio: se una finestra è aperta e il rumore proveniente dalla strada è eccessivamente alto, chiudere la finestra. Se il rumore proveniente dal condizionatore dell’aria è elevato, ridurre il livello del condizionatore. Il telefono non è connesso.
OVERLOAD Il dispositivo USB è sovraccaricato. t Scollegare il dispositivo USB, quindi cambiare sorgente premendo (SOURCE). t Indica che il dispositivo USB presenta problemi di funzionamento oppure che è stato collegato un dispositivo non supportato. READ È in corso la lettura di tutte le informazioni relative a tutti i brani e agli album del disco/dispositivo USB. t Una volta terminata l’operazione, la riproduzione viene avviata automaticamente.
Uit veiligheidsoverwegingen moet u dit apparaat in het dashboard van de auto installeren. Raadpleeg de bijgeleverde handleiding voor installatie/aansluitingen voor meer informatie over de installatie en aansluitingen. Dit label bevindt zich aan de onderkant van het apparaat. Het naamplaatje met de bedrijfsspanning, enzovoort bevindt zich aan de onderkant van de behuizing.
Het woordmerk Bluetooth en de logo's van Bluetooth zijn eigendom van Bluetooth SIG, Inc. en Sony Corporation gebruikt deze items onder licentie. Overige handelsmerken en merknamen zijn eigendom van de respectieve eigenaars. Microsoft, Windows Media en het Windows-logo zijn geregistreerde handelsmerken van Microsoft Corporation in de VS en/of andere landen. Waarschuwing als het contactslot van de auto geen ACC-positie heeft Zorg ervoor dat u de functie voor automatisch uitschakelen instelt (pagina 22).
Inhoudsopgave Welkom! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Bluetooth-functie Aan de slag Bluetooth-bewerkingen. . . . . . . . . . . . . . . . . . Koppelen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Informatie over Bluetooth-pictogrammen . . . . . . . . . . . . . . Verbinding . . . . . . . . . . . . . . . . . . . . . . . . . . . De uitvoer van het Bluetooth-signaal van dit apparaat overschakelen naar ingeschakeld . . . . . . . . . . . . . . . . . . . . . . . .
Welkom! Dank u voor de aankoop van dit Sony Bluetooth™-audiosysteem. U kunt tijdens het rijden genieten van de volgende functies. • CD's afspelen U kunt CD-DA's (ook met CD TEXT) en CD-R's/CD-RW's (MP3-/WMA-/AACbestanden (pagina 25)) afspelen. Soorten discs Label op de disc CD-DA MP3 WMA AAC • Radio-ontvangst – U kunt maximaal 6 zenders per band opslaan (FM1, FM2, FM3, MW en LW). – BTM (geheugen voor beste afstemming): Met het apparaat worden zenders met sterke signalen geselecteerd en opgeslagen.
Blootstelling aan radiofrequenties RF-signalen beïnvloeden wellicht onjuist geïnstalleerde of onvoldoende afgeschermde elektronische systemen in auto's, zoals elektronische brandstofinjectiesystemen, elektronische antiblokkeersystemen (anti-slip), elektronische snelheidsbeperkingssystemen of airbagsystemen. Voor installatie van of onderhoud aan dit apparaat kunt u het beste contact opnemen met de fabrikant van uw auto of een vertegenwoordiger van de fabrikant.
De klok instellen De digitale klok werkt met het 24-uurs systeem. 1 Houd de selectietoets ingedrukt. Het installatievenster wordt weergegeven. 2 Druk herhaaldelijk op de selectietoets tot "CLOCK-ADJ" wordt weergegeven. 3 Druk op (SEEK) +. De aanduiding voor het uur begint te knipperen. 4 Draai de regelknop om het uur en de minuten in te stellen. Als u de digitale aanduiding wilt verplaatsen, drukt u op (SEEK) –/+. 5 Druk op de selectietoets. Het instellen is voltooid en de klok begint te lopen.
Bedieningselementen en algemene handelingen Hoofdeenheid 1 23 4 5 6 7 8 OFF BROWSE PUSH SELECT / SOURCE SEEK SEEK BACK MODE BLUETOOTH BT ALBUM PTY AF / TA 1 2 REP SHUF MIC PAUSE SCRL 3 4 5 6 DSPL 9 q; qa qs qd qfqg ql qh qj AUX qk w; RESET In dit gedeelte vindt u informatie over de locatie van bedieningselementen en instructies voor algemene handelingen. Bekijk de betreffende pagina's voor meer informatie.
Radio: Automatisch afstemmen op zenders (indrukken); handmatig zoeken naar zenders (ingedrukt houden). Bluetooth-audioapparaat*1: Tracks overslaan (indrukken). M MODE toets pagina 12 De radioband selecteren (FM/MW/LW); de afspeelmodus op het ATRAC AD-apparaat selecteren. N BLUETOOTH toets pagina 16 Bluetooth-signaal in-/uitschakelen, koppelen.
Kaartafstandsbediening RM-X304 1 2 3 OFF SOURCE ATT SEL MODE 6 7 8 + 9 – 4 5 SCRL DSPL 1 2 3 4 5 6 0 qa + VOL – De volgende toetsen op de kaartafstandsbediening verschillen van de toetsen op het apparaat of hebben andere functies dan de toetsen op het apparaat. Verwijder het beschermende laagje vóór gebruik (pagina 6). A OFF toets Uitschakelen; de bron stoppen. B SOURCE toets Inschakelen; de bron wijzigen (radio/CD/ USB/AUX/Bluetooth-audio/Bluetoothtelefoon). C < (.
Zoeken naar een track — Quick-BrowZer U kunt gemakkelijk op categorie zoeken naar een track op een CD of USB-apparaat ("Walkman"/ apparaat voor massaopslag). (BROWSE): De Quick-BrowZer-stand openen/sluiten. OFF BROWSE PUSH SELECT / SOURCE SEEK SEEK BACK MODE Regelknop: Het item selecteren (draaien); het item bevestigen (indrukken). BLUETOOTH BT (BACK): Terugkeren naar het vorige scherm. 1 Druk op (BROWSE).
CD Radio Zenders opslaan en ontvangen Schermitems Let op Als u afstemt op zenders tijdens het rijden, moet u de BTM-functie (geheugen voor beste afstemming) gebruiken om ongelukken te vermijden. A Bron B Tracknummer/verstreken speelduur, disc-/ artiestennaam, albumnummer*, albumnaam, tracknaam, tekstinformatie, klok Automatisch opslaan — BTM 1 Druk herhaaldelijk op (SOURCE) tot "TUNER" wordt weergegeven. Druk herhaaldelijk op (MODE) om de band te wijzigen. U kunt FM1, FM2, FM3, MW of LW selecteren.
Automatisch afstemmen 1 Selecteer de band en druk op (SEEK) –/+ om de zender te zoeken. Het zoeken stopt zodra een zender wordt ontvangen. Herhaal deze procedure tot de gewenste zender wordt ontvangen. Tip Als u de frequentie kent van de zender die u wilt beluisteren, houdt u (SEEK) –/+ ingedrukt tot de frequentie ongeveer is bereikt en drukt u vervolgens herhaaldelijk op (SEEK) –/+ om nauwkeurig af te stemmen op de gewenste frequentie (handmatig afstemmen).
Noodberichten ontvangen Als AF of TA is ingeschakeld, wordt de geselecteerde bron automatisch onderbroken door de noodberichten.* PTY selecteren 1 Houd (AF/TA) (PTY) ingedrukt tijdens FM-ontvangst. * behalve tijdens een gesprek Tip Als u het volume aanpast tijdens een verkeersbericht, wordt dat volume opgeslagen in het geheugen voor volgende verkeersberichten, onafhankelijk van het normale volume.
USB-apparaten Schermitems USB-apparaat afspelen 1 Sluit het USB-apparaat aan op de USBaansluiting. A ATRAC AD-apparaat: AAD Apparaat voor massaopslag: USB B Track-/album-/artiesten-/afspeellijst-/ genrenummer, track-/album-/artiesten-/ afspeellijst-/genrenaam, verstreken speelduur, klok Als u de schermitems B wilt wijzigen, drukt u op (DSPL). Het afspelen wordt gestart.
Luisteren naar muziek op een "Walkman" (ATRAC AD-apparaat) 1 Druk tijdens het afspelen herhaaldelijk op (MODE) tot de gewenste instelling wordt weergegeven. Het item wordt als volgt gewijzigd: ALBUM t TRACK t GENRE t PLAYLIST t ARTIST Herhaaldelijk en willekeurig afspelen 1 Druk tijdens het afspelen herhaaldelijk op (3) (REP) of (4) (SHUF) tot de gewenste instelling wordt weergegeven. Selecteer Actie TRACK Track herhaaldelijk afspelen. ALBUM Album herhaaldelijk afspelen.
3 Stel het Bluetooth-apparaat in om te zoeken naar dit apparaat. Een lijst met gevonden apparaten wordt op het scherm van het aangesloten apparaat weergegeven. Dit apparaat wordt weergegeven als "XPLOD" op het aangesloten apparaat. Informatie over Bluetoothpictogrammen De volgende pictogrammen worden gebruikt door dit apparaat. brandt: knippert: uit: DR-BT30Q XPLOD XXXXXXX 4 Als er naar een toegangscode* wordt gevraagd op het scherm van een aangesloten apparaat, voert u "0000" in.
Een mobiele telefoon aansluiten Een audioapparaat aansluiten 1 Zorg dat dit apparaat en de mobiele telefoon zijn overgeschakeld naar Bluetooth-signaal ingeschakeld. 1 Zorg dat dit apparaat en het audioapparaat zijn overgeschakeld naar Bluetooth-signaal ingeschakeld. 2 Maak verbinding met dit apparaat met de mobiele telefoon. " " wordt weergegeven wanneer de verbinding is gemaakt. 2 Maak verbinding vanaf dit apparaat met het audioapparaat. " " wordt weergegeven wanneer de verbinding is gemaakt.
Microfoonsterkte aanpassen U kunt schakelen tussen twee volumeniveaus ("LOW" of "HI") om een geschikt niveau voor de andere persoon tijdens een gesprek in te stellen. 1 Druk op (5) tijdens een gesprek. Het item wordt als volgt gewijzigd: MIC-LOW y MIC-HI Opmerking De microfoon van dit apparaat bevindt zich aan de achterkant van het voorpaneel (pagina 9). Dek de microfoon niet af met tape, enzovoort. Bellen Als u belt vanaf dit apparaat, wordt alleen opnieuw bellen gebruikt.
Muziek streamen Muziek van een audioapparaat beluisteren U kunt op dit apparaat luisteren naar muziek van een audioapparaat als het audioapparaat het Bluetooth-profiel A2DP (Advanced Audio Distribution Profile) ondersteunt. 1 2 Verlaag het volume op dit apparaat. 3 Start het afspelen op het audioapparaat. 4 Pas het volume aan op dit apparaat. Druk herhaaldelijk op (SOURCE) tot "BT AUDIO" wordt weergegeven.
Overige functies De geluidsinstellingen wijzigen De geluidskenmerken wijzigen 1 2 Druk herhaaldelijk op de selectietoets tot het gewenste item wordt weergegeven. Draai de volumeknop om het geselecteerde item aan te passen. Na 3 seconden is het instellen voltooid en keert het scherm terug naar de normale weergave-/ontvangststand. De equalizercurve aanpassen — EQ3 Met "CUSTOM" bij EQ3 kunt u zelf equalizerinstellingen opgeven.
De volgende items kunnen worden ingesteld (volg de paginaverwijzing voor meer informatie): "z" geeft de standaardinstellingen aan. CLOCK-ADJ (klok aanpassen) (pagina 7) CT (kloktijd) "CT-ON" of "CT-OFF" (z) (pagina 13, 14) instellen. BEEP "BEEP-ON" (z) of "BEEP-OFF" instellen. RM (bedieningssatelliet) De werkingsrichting van de toetsen op de bedieningssatelliet wijzigen. – "RM NORM" (z): de bedieningssatelliet in de standaardpositie gebruiken.
Het volume aanpassen Pas het volume voor elk aangesloten audioapparaat aan voordat u het afspelen start. 1 Verlaag het volume op het apparaat. 2 Druk herhaaldelijk op (SOURCE) tot "AUX" wordt weergegeven. "AUX FRONT IN" wordt weergegeven. 3 Start het afspelen op het draagbare audioapparaat met een normaal volume. 4 Stel uw gebruikelijke luistervolume in op het apparaat.
Aanvullende informatie Voorzorgsmaatregelen • Wanneer uw auto in de volle zon heeft gestaan, moet u eerst het apparaat laten afkoelen voordat u het gebruikt. • Een elektrisch bediende antenne schuift automatisch uit wanneer het apparaat wordt ingeschakeld. Condensvorming Op een regenachtige dag of in een zeer vochtige omgeving kan vocht condenseren op de lenzen en het scherm van het apparaat. In dit geval kan de werking van het apparaat worden verstoord.
Informatie over USB-apparaten Informatie over MP3-bestanden • USB-apparaten voor massaopslag en ATRAC ADapparaten die in overeenstemming zijn met de USB-norm, kunnen worden gebruikt. Dit apparaat herkent echter geen USB-apparaten via een USB HUB. Voor meer informatie over de compatibiliteit van uw USB-apparaat gaat u naar de ondersteuningssite van Sony (pagina 30). • De bijbehorende codec is afhankelijk van het apparaattype.
Informatie over ATRAC-bestanden ATRAC3plus-indeling ATRAC3 (Adaptive Transform Acoustic Coding3) is een compressietechnologie voor audio. AudioCD-gegevens worden gecomprimeerd tot ongeveer 1/10 van de oorspronkelijke grootte. Met ATRAC3plus, een uitgebreide indeling van ATRAC3, worden audio CD-gegevens tot ongeveer 1/20 van de oorspronkelijke grootte gecomprimeerd. Het apparaat accepteert zowel de ATRAC3- als ATRAC3plus-indeling. De tekens voor tekstinformatie van SonicStage worden weergegeven.
Overige Zekeringen vervangen • De Bluetooth-functie van een mobiele telefoon functioneert mogelijk niet correct, afhankelijk van radiogolven en de locatie waar het apparaat wordt gebruikt. • Als u ongemakken ondervindt na het gebruik van een Bluetooth-apparaat, moet u meteen stoppen met het gebruik van het Bluetooth-apparaat. Als het probleem daarmee niet is verholpen, raadpleegt u de dichtstbijzijnde Sony-handelaar. Vervang een zekering altijd door een identiek exemplaar.
Het apparaat verwijderen 1 Technische gegevens Verwijder de beschermende rand. CD-speler 1 Maak het voorpaneel los (pagina 7). Signaal/ruis-afstand: 120 dB Frequentiebereik: 10 – 20.000 Hz Snelheidsfluctuaties: Minder dan meetbare waarden 2 Bevestig de ontgrendelingssleutels op de beschermende rand. Tuner FM Plaats de ontgrendelingssleutels zoals aangegeven. 3 Trek de ontgrendelingssleutels naar u toe om de beschermende rand te verwijderen.
Versterker Uitgang: Luidsprekeruitgangen (sure seal) Luidsprekerimpedantie: 4 – 8 ohm Maximaal uitgangsvermogen: 52 W × 4 (bij 4 ohm) Algemeen Uitgangen: Aansluiting voor audio-uitvoer (voor/achter) Aansluiting voor subwooferuitvoer (mono) Relaisaansluiting elektrische antenne Aansluiting versterker Ingangen: Telephone ATT-bedieningsaansluiting Afstandsbedieningsingang Antenne-ingang AUX-ingang (stereo mini-aansluiting) Toonregelingen: Laag: ±10 dB bij 60 Hz (XPLOD) Midden: ±10 dB bij 1 kHz (XPLOD) Hoog: ±
Problemen oplossen De onderstaande controlelijst kan u helpen bij het oplossen van problemen die zich met het apparaat kunnen voordoen. Voordat u de onderstaande controlelijst doorneemt, moet u eerst de aanwijzingen voor aansluiting en gebruik controleren. Als het probleem blijft optreden, gaat u naar de volgende ondersteuningssite. Ondersteuningssite Als u vragen hebt of de laatste ondersteuningsinformatie over dit product wilt hebben, gaat u naar de onderstaande website: http://support.sony-europe.
Radio-ontvangst De zenders kunnen niet worden ontvangen. Het geluid is gestoord. • Sluit de bedieningskabel van de elektrische antenne (blauw) of voedingskabel voor accessoires (rood) aan op de voedingskabel van de auto-antenneversterker (alleen als uw auto is uitgerust met een FM/MW/LWantenne in de achter- of zijruit). • Controleer de aansluiting van de auto-antenne. • De automatische antenne schuift niet uit. t Controleer de aansluiting van de antennebedieningskabel. • Controleer de frequentie.
Er treedt echo of ruis op in de telefoongesprekken. • Zet het volume zachter. • Als ander omgevingsgeluid dan het geluid van het telefoongesprek te hard is, probeert u dit geluid te beperken. Bijvoorbeeld: als er een raam open staat en het verkeer veel lawaai maakt, sluit u het raam. Als de airconditioning veel lawaai maakt, zet u de airconditioning zachter. De telefoon is niet aangesloten. Wanneer Bluetooth-audio wordt afgespeeld, is de telefoon niet verbonden, ook al drukt u op (handsfree).
Foutmeldingen/berichten CHECKING Het apparaat controleert de aansluiting van een USBapparaat. t Wacht tot de controle van de aansluiting is voltooid. ERROR • De disc is vuil of is omgekeerd geplaatst. t Reinig de disc of plaats deze op de juiste manier. • Er is een lege disc in het apparaat geplaatst. • De disc kan niet worden afgespeeld wegens een probleem. t Plaats een andere disc. • Het USB-apparaat is niet automatisch herkend. t Sluit het apparaat opnieuw aan. • Druk op Z om de disc te verwijderen.
Support site / Support-Website / Site d’assistance / Supporto / Ondersteuningssite http://support.sony-europe.com/ Tragen Sie die Seriennummer (SERIAL NO.) in dem reservierten Feld ein. Sie finden diese auf einem Aufkleber, der auf dem Gerätegehäuse angebracht ist. Nehmen Sie den ausgefüllten Geräte-Pass anschließend unbedingt aus der Bedienungsanleitung heraus, falls Sie diese im Fahrzeug aufbewahren möchten. Bitte bewahren Sie den Geräte-Pass an einem sicheren Ort auf.