Operation Manual

90
Viewing images
Deleting/editing an image
The F value and shutter
speed flash when you
press and hold the shutter
button halfway down.
• The exposure is incorrect. p Correct the exposure (page 46).
Symptom Cause Solution
The image cannot be
played back.
• The mode selector is not set to .
• You cannot play back the image on the camera,
if it is modified on a computer or its folder/file
name is changed.
• The camera is in USB mode.
p Set the mode selector to (page 32).
—
p Cancel USB communication (page 79).
The image is coarse right
after being played back.
— p This is not a malfunction.
The images cannot be
played back on a TV.
• The [Video Out] setting for the camera in SET
UP is incorrect.
• The connection is not correct.
p Set [Video Out] to [NTSC] or [PAL] (page 103).
p Check the connection (page 34).
The images cannot be
played back on a
computer.
— p See page 91.
Unknown beeps are heard
from the camera while
viewing a movie.
• These beeps are heard when the auto focus is
working.
p This is not a malfunction. Shoot in focus preset mode (page 45).
Symptom Cause Solution
Your camera cannot
delete an image.
• The image is protected.
• The write-protect switch on the “Memory Stick”
is set to the LOCK position.
p Cancel the protection (page 63).
p Set it to the recording position (page 105).
You have deleted the
image by mistake.
• Once you have deleted an image, you cannot
restore it.
p Protecting the image can prevent accidental erasure (page 63).
p The write-protect switch on the “Memory Stick” will prevent
you from deleting images by mistake (page 105).
Symptom Cause Solution