User's Manual

430
Resizer
Chapter 4 Keys
2 Set the parameters.
This operation is the same as the DME mosaic setting. For more details,
see “Mosaic Settings” in Chapter 11 (Volume 2).
3 In the < Mosaic/Defocus Mode > group, select the signal to which to apply
the mosaic effect.
Video/Key: Video signal and key signal
Video: Video signal only
Note
If mosaic is enabled, and in the <Mosaic/Defocus Mode> group you select
Video/Key, then the crop and mask are disabled.
4 Set the parameters.
To make the mosaic like a relief pattern
1 With [Mosaic] on, press [Relief], turning it on.
2 In addition to the mosaic parameters, set the following parameters.
Defocusing
1 In the M/E-1 >Key1 >Processed Key >Enhanced Effect menu, press
[Defocus], turning it on.
2 Set the parameters.
This operation is the same as the defocusing setting when using the DME
with the DME dedicated interface. However, <Mosaic/Defocus Mode>
appears in place of <Defocus Mode>. For more details, see “Defocus
Settings” in Chapter 11 (Volume 2).
Knob Parameter Adjustment Setting values
1 H Horizontal defocusing 0.00 to 100.00
2 V Vertical defocusing 0.00 to 100.00
3 All Horizontal and vertical defocusing H value shown
Knob Parameter Adjustment Setting values
3 Gain Relief depth of mosaic cells 0.00 to 100.00
4 Angle Light source direction –8.00 to +8.00