HVT RTH] Receiving calls with the cordless handset 1 ‘Whi you hear the phones ting: + Press (TALK): or. + Pick up the cordless handset from the charger when the cordless handset is placed on the charger. (When Quick talk i set t0. "ON see page 40). “TALK” appears on the display and the display also shows the talk time ini hours, minutes and seconds. “HANDSET 1 IN USE” J appears on the display of the @ i I base phone when the cordless handset with the station number = "1s in use.
Receiving calls (continued) Additional tasks To Do this Adjust the cordless handset: Sef the VOL switch Fa H (high), M middies} or 1. volume ow). Pita call oi hold Press COLEY, HOLD appears on the display, Press gain or pick up the cordless ‘handset from: the charger (When Quick flak is Set 80 “ON; sce below) to resume the. conversation. Switch to another call Pros (CALL WILDCATTING. (“call waiting” service) Tress again to Tatum to the first caviler.
| ETT Receiving calls with the base phone Wii ist beat 156 prioritize kip fhe Kano of press on the base phone. “TALK” or “SPEAKERPHONE appears on the display and the display also shows the talk time in hours, minutes and seconds: Wren you're done talking, replace the handset in the cradle or press again. To obtain the best speakerphone performance, see page 36.
Receiving calls (continued) Note Even when, you $et the ringer volume on the base phone to off, the cordless handset will ring when the ringer volume on the cordless handset anisette to high of Bw. Tips » Information you of as incoming call, the display shows “6 RINGING #47 ‘even when you set the rigger volumetric or the base euphoria to off; » You.
| Telephone Features Phone Directory You can dial a number by scrolling through the Phone Directory. Both the base phone and the cordless handset can each store up 16 50 separate numbers, Storing phone numbers and names Example: to store "BONY “123° 45672, 1 Press (PEND: {If you're al the base phone, press (FROGMAN) {BO TACKY PHONE DIRECTORY MEMORY: MANGE wt 2 If "PHONE DIRECTORY"is 3 not selected, turn Jog Dial to 2 select it. 2 Ed Press Jog Dial. § “ENTER NAME appears on 3 the display.
Phone Directory (continued) Each press of Jog Dial after choosing “4” or “switches the characters from upper case letters ~» lower case letters ~» numbers and Symbols, Enter successive characters in the sear way. To enter a “space”; turn Jog Dial tu choose (space), ard then press Jog Dial: A press wm (or GERTRUDE. “ENTER NUMBER" appears on the display. 5 Enter the phone number by pressing the dialing keys, ‘You can enter up to 20 digits, including a tone and a pause, each of which is counted as one digit.
Notes # AE you fry fo save a Best phone imbiber, you will hear. five short error beeps. ad “TIE MEMORY 15 FULLY will le dogeared, You cannot store the phone number. To store another phone nid! phone numbers (see page 47): Names cannot be entered using the dialing keys. * Dio not allow more Han 60 seconds th elapse during the operation procedure 7, Erase one of the stored Tips. When you select “(GON BACK)E, you can return £0 the previous set display by pressing Jug Dial.
Phone Directory (continued) Changing a stored name and/or phone number 1 Display the name you want to change by doing. steps pages 48 to 49. OUTBOUND JOHN PONY SMITH JOHN 2 Press Jog Dial. 3 Tum Jog Dial to choose “EDIT”, and then press Jog Dial. 30 COEFFICIENT The cursor is at the right of the name. GRETZKY Zu «+ A Tum Jog Dial to choose then press Jog Dial + or press to erase the characters, and enter the new name, If you want to change only the number, skip this step. 5 Press (PGW.
Erasing a memory location To erase the phone number one by one 1 Display the name you want to erase by doing BROWN JOHN steps-1 to 3-on page 48: SONY SMITH JOHN 2 Press Jog Dial. 3 Turn Jog Dial to choose “ERASE DIRECTORY”, EEE and then press Jog Dial. wee BACK) YES Tum Jog Dial to choose. “YES”, and then press 3 * T Jog Dial. pd You hear a long confirmation beep and the 8 memory location is erased. continued Telephone Features DIUSOBYEL-U2 p68 #7, 1.
Phone Directory (continued) To erase the entire memory at once 1 Press (PEED) (If you're at the base prioritize; pros 2 Tum Jog Dial to choose "MEMORY MANAGE", and then press Jog Dial, 3 Turn Jog Dial to choose ERASE ALL DIR”, and then press Jog Dial. {80 BACK) ERASE DIRECTORY 4 Tun Jog Dial to chaos “ERASE DIRECTORY”, and then press Jog Dial. + “You hear a long confirmation beep and the . entire memory is erased. Making calls from the Phone Directory 1 Press Jog Dial “PHONE: DIRECTORY” appears the display.
2 Tum Jog Dial to select an alphabet group (ABC, which includes the initial character of the name you want to search for, and then press jog Dial: If a numbers or a symbol is the initial character, select the “fetch” group. 3 Select the name you want to call by turning Jog aL JR JOHN SMITH JOHN 4 pees Jog Dial. 5 Turn Jog Dial to choose “DIAL, and then press Jog Dial. + The phone number will be dialed.
|| EST] Phone Directory (continued) Transferring the Phone Directory memory “The Phone Directory memory can be transferred one by one or all at one (with a maximum of 50 numbers} from a cordless handset tithe ‘base phone oF 16 an additional cordless handsets, of from 4 base phone to ote of the careless handsets.
To transfer all phone numbers from the Phone Directory The Euphoria Directory receiving the transfer will Be totally enteritis. 1 press (GRAB. (Lf you're at the base phone; press (PROGRAM) § 2.Turn Jog Dial to choose "MEMORY. (50 BACK) MANAGE", and then press Jog Dial. REC. CAPACITY SEND ALL DIR 3 Turn Jog Dial to choose “SEND ALL DIR”, and then press Jog Dial. 4 When the system has one cordless handset {Cordless handset) + Press Jog Dial.
Switching the phones during a call You can easily switch between the cordless handset and. the base phone without disconnecting the call, To switch from the base phone to the cordless handset 1 Press. on the base: phone. ‘The call is on hold and “HOLD” appears on the display. 2 Pick up the cordless handset groin thi charger (When Ticktock talk is set ta “ON”; see page 40) or press (TALK) or (HOLD) on the cordless handset, You can continue talking to the caller through the cordless handset.
Switching from the cordless handset to another cordless handset (When the system has an additional cordless handset.) 1 Press on the cordless handset. The call is on hold and "HOLD appears on the display. 2 Pickup the cordless handset from the charger (When Quick talk is set to “ON; see page 40). of press (TALK) or (HOLD). on the cordless handset. You can continue talking to the caller throughout the cordless handset: *® semiyearly auoydaja) + Telephone features HST U2 g65 5 320.
54% Intercom Operation Talking between the phones (Intercom) You can make an intercom call between the cordless handset and base phone, or between the cordless handsets, You can start the intercom from any phone: To talk from the cordless handset to the base phone Example: Making intercom call from the cordless handset whose station number is 1 to the base phone: 1 Press (INTERCOM). 2 Turn Jog Dial to choose “TO BASELESS, and then press Jog Dial.
To talk between the cordless handsets (When the system has an additional cordless handset.) Example: Making intercom call from Note If there is no additional cordless handset, pressing instep 1 pages the base phone. Tip one answers the phone Press (INTERCOM) again. station number is Ito station number is 2. Press (INTERCOM). Turn Jog Dial to choose “TO HANDSET 2”, and then press Jog Dial: : Both cordless handsets ring and “Hk INTERCOM.
56% 444989 BBB SEES EEE EEE SEES ESE SEES EEE ESE BE SL Se BSL SSE reset eee steer. i] Talking between the phones (Intercom) (continued) To talk from the base phone to the cordless handset Example: Making intercom call from the base phone tithe cordless handset whose station number ig 1. 1 press rem. LW 2 Turn Jog Dial to choose “TO HANDSET 1”, and then press Jog Dial.
Transferring a call You can transfer a call between the cordless handset and base phone, or between the cordless handsets without disconnecting the call: To transfer from the cordless handset to the base phone Example: Transferring a call from the cordless handset whose station number is 1 to the base phone. 1 press overcome. The call is put on hold. 2 Turn Jog Dial to choose “TO BASE”, and then press Jog Dial.
58% HEE Transferring a call (continued) To transfer between the cordless handsets (When the system has an additional cordless handset.) Example: Transferring a call from station number is 1 to station number is 2. Press (INTERCOM). The call is put on hold: i) 2 Turn Jog Dial to choose “TO HANDSET 27; and then press Jog Dial. Both cordless handsets ring and INTERCOM 2 '¥X” appears QFE.
To transfer from the base phone to the cordless handset Example: Transferring a call from the base phone tithe cordless handset whose station number is 1: 1 Press (INTERCOM): The call is put on hold. 2 Turn Jog Dial to choose “TO HANDSET 17, and then press Jog Dial. ; The base phone and cordless handset ring and “x INTERCOM 1 %” appears on the display of the base phone and “¥k INTERCOM 0 XX” appears on the display of the cordless handset.
* Answering Machine Features Preparing the answering machine Recording the greeting This answering machine has prerecorded greetings (see page 81% However, you can record yous own greeting. The greeting mist be between two seconds and one minute long. You can record only one greeting, and it is used regardless of the.