Operating Instructions - (Multilingual)

16
Work Flow / Mount the Unit
The steps that are required before starting to use
the SR-R4 are listed below.
When mounting the unit on the SR-R4
When mounting the unit on the F65
Tip
A Phillips (cross head) screwdriver is required for
mounting the unit.
Notes
• The outside bracket cannot be attached to devices other
than the F65.
• The CP bracket can only be attached to the SR-R1, the
SR-R4, or the outside bracket.
• The length of the supplied connection cable is
optimized for the SR-R1 and SR-R4.
Attach the CP bracket supplied with the unit to
the SR-R4, and connect the SR-R4 and the unit
with the control panel cable.
1 Attach the CP bracket supplied with the
unit to the right side of the SR-R4.
2 Slide the unit into the CP bracket.
Work Flow
Mount the unit on SR-R4 (page 16)
Connect SR-R4 and F65
Turn power on
Insert SRMemory card
Connect SR-R4 and F65
Mount the unit on the F65
Turn power on
Insert SRMemory card
Mount the Unit
Mount the Unit on the SR-R4