4-567-503-24(1) Personal Audio System Operating Instructions Getting started About SongPal Listening to music through a BLUETOOTH connection Listening to music via a WiFi network Listening to music with connected components Additional information Refer to the Wi-Fi Startup Guide (separate document) for how to listen to music stored in your PC or other device over your Wi-Fi network.
Before operating the system, please read this guide thoroughly and retain it for future reference. To reduce the risk of fire, do not cover the ventilation opening of the appliance with newspapers, tablecloths, curtains, etc. Do not expose the appliance to naked flame sources (for example, lighted candles). To reduce the risk of fire or electric shock, do not expose this apparatus to dripping or splashing, and do not place objects filled with liquids, such as vases, on the apparatus.
Precautions On safety The nameplate indicating the Sony trademark, model number and electrical rating is located on the bottom exterior of this unit. The MAC address is located on the bottom exterior of this unit. MAC1: MAC address of wired network MAC2: MAC address of Wi-Fi network Before operating the unit, be sure that the operating voltage of the unit is identical with that of your local power supply. On placement Do not set the unit in an inclined position.
The BLUETOOTH® word mark and logos On copyrights Windows, the Windows logo, and 4GB Windows Media are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. This product is protected by certain intellectual property rights of Microsoft Corporation. Use or distribution of such technology outside of this product is prohibited without a license from Microsoft or an authorized Microsoft subsidiary.
Notes on the License This product contains software that Sony uses under a licensing agreement with the owner of its copyright. We are obligated to announce the contents of the agreement to customers under requirement by the owner of copyright for the software. Please access the following URL and read the contents of the license. http://rd1.sony.
Table of Contents Precautions ......................................3 Documents provided .......................3 On copyrights.................................. 4 Getting started Location and function of controls....7 About SongPal Listening to music with connected components Listening to music on a USB flash drive, etc. (USB-A) .................................19 Listening to music on a highresolution supported Walkman® and Xperia™ (USB-B) .................
Getting started Location and function of controls This manual mainly explains operations using the buttons on the unit, but the same operations can also be performed using the remote control having the same or similar names. Getting started Unit Without turning off the power of the unit, place your hand over the center of the top panel (page 8). The backlight lights up and the function buttons are displayed.
UPDATE button Indicates the status of the unit’s software update. LINK indicator Indicates the status of the network connection of the unit. VOL (volume) –/+ buttons Tap to adjust the volume. The / (on/standby) indicator and reaction indicator flash according to the volume adjustment when tapped. / (on/standby) button/indicator Tap to turn the power of the unit on and off. Wi-Fi antenna (aerial) Set upright during Wi-Fi connection as below.
To enjoy more dynamic sound Remove the speaker grille on the front of the unit with the speaker grille detach tool (supplied).*1 LINK indicator Unit status Lights up (orange) The unit is connected to a Wi-Fi network. Lights up (pink) The unit is connected to a wired network. Flashes (orange) The unit is in the process of connecting to a Wi-Fi network. Flashes (pink) The unit is in the process of connecting to a wired network. Flashes (red) The network connection failed.
UPDATE button Indicator status (color) Unit status Lights up (orange) The button lights up in orange when the unit detects the latest software while connected to the Internet. When you tap and hold the lit button, the update of the unit’s software is started. Flashes (orange) • The unit is updating the software. During the update, you cannot operate the unit.
To insert the batteries Insert the two supplied R03 (size AAA) batteries, side first, matching the polarities shown below. Getting started Note Do not attempt to charge the batteries. If battery leakage occurs, remove any leaked fluid in the battery compartment, and replace the batteries with new ones. Strong light, such as lighting equipment or direct sunlight, may affect remote control operation. The remote control may not work. The batteries should be replaced within every 6 months.
About SongPal What you can do with SongPal SongPal is an application for controlling Sony audio devices which are compatible with SongPal using your smartphone/ iPhone. differ. A separate registration is required for certain services. An update of the device may be required. The services provided by third parties may change, stop or be terminated without notice. Sony does not assume any responsibility for such situations. What you can control with SongPal varies depending on the connected device.
Listening to music through a BLUETOOTH connection Pairing the unit with a BLUETOOTH device and listening to music 3 The (BLUETOOTH) indicator begins to flash quickly in white, and the unit enters pairing mode. 4 When a list of detected devices appears on the display of the BLUETOOTH device, select “SRS-X99”. If passkey entry is required on the display of the BLUETOOTH device, enter “0000”. Note When pairing the unit with a BLUETOOTH device, place the BLUETOOTH device within one meter of the unit.
7 Start playback on the BLUETOOTH device. Tip You can perform a pairing operation or attempt to make a BLUETOOTH connection with another BLUETOOTH device while the BLUETOOTH connection is established with one BLUETOOTH device. The currently established BLUETOOTH connection is canceled when BLUETOOTH connection with another device is successfully established. SongPal does not have a music playback function via the BLUETOOTH connection.
Listening to music by one-touch action (NFC) disconnected and the unit is connected with the smartphone. NFC is a technology for short-range wireless communication between various devices such as a mobile phone and IC tag. Just touch your smartphone on the unit. The unit is turned on automatically, and pairing and BLUETOOTH connection are established. Beforehand, turn the NFC settings to on and unlock the screen of the smartphone. Touch your smartphone on the N-Mark on the unit.
Listening to music via a Wi-Fi network Selecting the method of network connection If you connect this unit to a network, you can enjoy this unit in various ways. Depending on your network environment, setting up methods are different. Select the appropriate connecting method for your network environment from below. Tip For setting the fixed IP address, use the screen in step 6 of “Connecting with a PC” (page 16).
3 Turn on the unit. Wait until the LINK indicator stops flashing and stays lit in pink. It takes about 1 minute. 6 Select the SSID of your wireless router and enter the password. Note When you connect the unit to a PC for the first time, it takes about 4 or 5 minutes until the LINK indicator stops flashing and stays lit. 4 Launch a browser. Enter the following URL in the address bar. Select [Network Settings] from the menu. See the recorded password in step 1 (page 16). 7 Select [Apply].
Listening to the same music from the multiple speakers (SongPal Link function) Enjoy music in any room via Wi-Fi. You can listen to your favorite music stored in your PCs or mobile phones and furthermore, music from streaming services, in different rooms with ultimate sound quality. 1 Install the free application SongPal on your smartphone/ iPhone. 2 Connect the unit and smartphone/iPhone to your WiFi network.
Listening to an Internet music service (Spotify) “Spotify” gives you instant access to millions of songs. The “Spotify Connect” feature lets you select music on the Spotify App and stream it on the unit. To use “Spotify Connect” feature, you need a Premium account. For details, visit www.spotify.com/connect 1 Connect the unit and smartphone/iPhone to your WiFi network. Note Depending on the country and region, music services and their periods of availability may differ.
Listening to music on a high-resolution supported Walkman® and Xperia™ (USB-B) Listening to music on an external device (AUDIO IN) High-resolution supported Walkman or Xperia USB cable (not supplied) * Optional High-Resolution Audio USB Adaptor WM-PORT Cable can be ordered from your nearest Sony Service Center. To connect Xperia, use a commercially available cable. 1 Connect the device to the AUDIO IN jack with an audio cable (not supplied).
Additional information Unable to connect the unit to a BLUETOOTH device with one-touch connection (NFC) Keep the smartphone close to the unit until Troubleshooting If a problem occurs while operating the unit, check the following to resolve the problem before consulting your nearest Sony dealer. Check to see if the problem is listed in this “Troubleshooting” section. Check in Help Guide. Refer to “How to use” and “Troubleshooting” in Help Guide for details. http://rd1.sony.
If a LAN cable is connected to the unit, disconnect it and restart the unit. When a LAN cable is connected to the unit, the unit automatically tries to connect to the home network over a wired network and a wireless network cannot be used. Check that your wireless router is turned on. Bring the unit and wireless router closer together. Devices that use the 2.4 GHz frequency band, such as a microwave oven, BLUETOOTH or digital cordless device, etc., may interrupt Wi-Fi communication.
network connection is disconnected as well. If so, set this function again. When the multi-room function turns on, it supports TDLS (Tunneled Direct Link Setup) and works as a wireless router that improves the data communication quality (Version 1.60 or later). To initialize the unit Initialize the unit if these measures do not resolve the problem or if the settings fail.
If the system is used within 10 m of a What is BLUETOOTH wireless technology? BLUETOOTH wireless technology is a shortrange wireless technology that enables wireless data communication between digital devices, such as a computer and digital camera. BLUETOOTH wireless technology operates within a range of about 10 m. Connecting two devices as necessary is common, but some devices can be connected to multiple devices at the same time.
Supported codec*3 SBC*4 / AAC*5 / LDAC*6 Specifications Transmission bandwidth (A2DP) 20 Hz – 20,000 Hz (with 44.1 kHz sampling) Section for Speaker Speakers Super tweeter (Top): Approx. 19 mm diameter × 2 Super tweeter (Front): Approx. 19 mm diameter × 2 Midrange: Approx. 50 mm diameter × 2 Subwoofer: Approx.
ALAC: 32/44.1/48/88.2/96/176.4/192 kHz (16/24 bit) DSD (DSF/DSDIFF): 2.8 MHz (1 bit) Transfer speed High-speed Supported USB device Mass Storage Class (MSC) Maximum output current 2.1 A MAX USB B port ( B) You can connect a compatible device such as a PC, etc., to this unit using a USB cable (not supplied). Supported format*1 PCM: 44.1/48/88.2/96/176.4/192 kHz (16/ 24/32bit) DSD (DSF/DSDIFF): 2.
Compatible iPhone/iPad/iPod models SongPal, as of January 2015, does not support the display optimized for iPad screen.
©2015 Sony Corporation Printed in China