User's Manual

ManualsBrandsSony ManualsAudio systemsPersonal Audio System

SRS-BTS50

4-466-340-11(1)

English Personal Audio System

Before operating the system, please read this guide thoroughly and retain it for future

reference.

Owner’s Record

The serial number is located on the bottom.

Record the serial number in the space provided below. Refer to them whenever you

call upon your Sony dealer regarding this product.

Model No. SRS-BTS50

Serial No.

For customers in the USA

Please register this product on line at http://www.sony.com/productregistration

Proper registration will enable us to send you periodic updates about new products,

services and other important announcements. Registering your product will also

allow us to contact you in the unlikely event that the product needs adjustment or

modification. Thank you.

WARNING

To reduce the risk of fire or electric shock, do not expose this apparatus to rain or

moisture.

To reduce the risk of fire, do not cover the ventilation opening of the apparatus with

newspapers, tablecloths, curtains, etc. Do not place the naked flame sources such as

lighted candles on the apparatus.

To reduce the risk of fire or electric shock, do not expose this apparatus to dripping or

splashing, and do not place objects filled with liquids, such as vases, on the apparatus.

Do not install the appliance in a confined space, such as a bookcase or built-in cabinet.

Do not expose batteries or apparatus with battery installed to an excessive heat such

as sunshine, fire or the like.

As the main plug of the AC adaptor is used to disconnect the AC adaptor from the

mains, connect the system to an easily accessible AC outlet. Should you notice an

abnormality in the system, disconnect the main plug from AC outlet immediately.

The system is not disconnected from the mains as long as it is connected to the AC

outlet, even if the system itself has been turned off.

CAUTION

You are cautioned that any changes or modifications not expressly approved in this

manual could void your authority to operate this equipment.

The following FCC/IC statement applies only to the version of this model manufactured

for sale in the USA and Canada. Other versions may not comply with FCC/IC technical

regulations.

NOTE:

This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on,

the user is encouraged to try to correct the interference by one or more of the

following measures:



Reorient or relocate the receiving antenna.



Increase the separation between the equipment and receiver.



Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.



Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC/IC radiation exposure limits set forth for an

uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines

in Supplement C to OET65 and RSS-102 of the IC radio frequency (RF) Exposure rules.

This equipment has very low levels of RF energy that it deemed to comply without

maximum permissive exposure evaluation (MPE). But it is desirable that it should be

installed and operated keeping the radiator at least 20cm or more away from person’s

body (excluding extremities: hands, wrists, feet and ankles).

This equipment must not be co-located or operated in conjunction with any other

antenna or transmitter.

This Class B digital device complies with Part 15 of the FCC Rules and Canadian

ICES-003. Operation is subject to the following two conditions: (1) this device may not

cause harmful interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

For customers in the USA and Canada

RECYCLING LITHIUM-ION BATTERIES

Lithium-Ion batteries are recyclable.

You can help preserve our environment by returning your used

rechargeable batteries to the collection and recycling location

nearest you.

For more information regarding recycling of rechargeable batteries,

call toll free 1-800-822-8837, or visit http://www.rbrc.org/

Caution: Do not handle damaged or leaking Lithium-Ion batteries.

For the state of California, USA only

Perchlorate Material - special handling may apply, See

www.dtsc.ca.gov/hazardouswaste/perchlorate

Perchlorate Material : Lithium battery contains perchlorate

For all other batteries, please view the section on how to remove the battery from the

product safely. Hand the battery over to the applicable collection point for the recycling

of waste batteries.

For more detailed information about recycling of this product or battery, please contact

your local Civic Office, your household waste disposal service or the shop where you

purchased the product.

For customers in Canada

This device complies with Industry Canada licence-exempt RSS standard(s). Operation

is subject to the following two conditions: (1) this device may not cause interference,

and (2) this device must accept any interference, including interference that may cause

undesired operation of the device.

This Class B digital apparatus complies with Canadian ICES-003.

This warranty is valid only in the United States./ Cette garantie ne s’applique qu’aux États-Unis./ Esta garantía sólo es válida en Estados Unidos.

Precautions

Note when using with a mobile phone



For details on operation of your mobile phone when receiving a telephone call while

transmitting the sound using the BLUETOOTH connection, refer to the operating

instructions supplied with the mobile phone.

On safety

The nameplate indicating Sony trademark, model number and electrical rating is

located on the bottom exterior of this system.



Before operating the system, be sure that the operating voltage of the system is

identical with that of your local power supply.

Where purchased Operating voltage

All countries/regions 100 V – 240 V AC, 50 Hz/60 Hz

Notes on the AC adaptor



When connecting or disconnecting the AC adaptor, turn off the system beforehand.

Otherwise, it may cause malfunction.



Use only the supplied AC adaptor. To avoid damaging the system, do not use any

other AC adaptor.

Polarity of the plug



Plug the AC adaptor into a nearby wall outlet (mains). In the case of a problem,

unplug it from the wall outlet (mains) immediately.



Do not install the AC adaptor in a confined space, such as a bookcase or built-in

cabinet.



To reduce the risk of fire or electric shock, do not expose the AC adaptor to dripping

or splashing, and do not place objects filled with liquids, such as vases, on the AC

adaptor.

On placement



Do not set the speaker in an inclined position.



Do not leave the system in a location near heat sources, or in a place subject to direct

sunlight, excessive dust, moisture, rain or mechanical shock.

On operation



Do not insert any small objects, etc., into the jacks or ventilation hole on the rear of

the system. The system may short out or malfunction.

On cleaning



Do not use alcohol, benzine, or thinner to clean the cabinet.

Others



If you have any questions or problems concerning this system that are not covered in

this manual, please consult your nearest Sony dealer.

On Copyrights



The BLUETOOTH

word mark and logos are owned by the Bluetooth SIG, Inc. and

any use of such marks by Sony Corporation is under license.



The N Mark is a trademark or registered trademark of NFC Forum, Inc. in the United

States and in other countries.



MPEG Layer-3 audio coding technology and patents licensed from Fraunhofer IIS and

Thomson.



Other trademarks and trade names are those of their respective owners.

What is BLUETOOTH wireless technology?

BLUETOOTH wireless technology is a short-range wireless technology that enables

wireless data communication between digital devices, such as a computer and digital

camera. BLUETOOTH wireless technology operates within a range of about 10m (about

30ft).

Connecting two devices as necessary is common, but some devices can be connected

to multiple devices at the same time.

You do not need to use a cable for connection, nor is it necessary for the devices to

face one another, such is the case with infrared technology. For example, you can use

such a device in a bag or pocket.

BLUETOOTH standard is an international standard supported by thousands of

companies all over the world, and employed by various companies worldwide.

Maximum communication range

Maximum communication range may shorten under the following conditions.



There is an obstacle such as a person, metal, or wall between the system and

BLUETOOTH device.



A wireless LAN device is in use near the system.



A microwave oven is in use near the system.



A device that generates electromagnetic radiation is in use near the system.

Interference from other devices

Because BLUETOOTH devices and wireless LAN (IEEE802.11b/g) use the same

frequency, microwave interference may occur and resulting in communication speed

deterioration, noise, or invalid connection if the system is used near a wireless LAN

device. In such a case, perform the following.



Use the system at least 10 m (about 30 ft) away from the wireless LAN device.



If the system is used within 10 m (about 30 ft) of a wireless LAN device, turn off the

wireless LAN device.

Interference to other devices

Microwaves emitting from a BLUETOOTH device may affect the operation of electronic

medical devices. Turn off the system and other BLUETOOTH devices in the following

locations, as it may cause an accident.



where inflammable gas is present, in a hospital, train, airplane, or a gas station



near automatic doors or a fire alarm

Notes



To be able to use the BLUETOOTH function, the BLUETOOTH device to be connected

requires the same profile as the system’s.

Note also that even if the same profile exists, devices may vary in function depending

on their specifications.



Due to the characteristic of BLUETOOTH wireless technology, the sound played on

the system is slightly delayed from the sound played on the BLUETOOTH device

during talking on the telephone or listening to the music.



This system supports security capabilities that comply with the BLUETOOTH standard

to provide a secure connection when the BLUETOOTH wireless technology is used,

but security may not be enough depending on the setting. Be careful when

communicating using BLUETOOTH wireless technology.



We do not take any responsibility for the leakage of information during BLUETOOTH

communication.



A device featuring the BLUETOOTH function is required to conform to the

BLUETOOTH standard specified by Bluetooth SIG, and be authenticated. Even if the

connected device conforms to the above mentioned BLUETOOTH standard, some

devices may not be connected or work correctly, depending on the features or

specifications of the device.



Noise or sound skips may occur depending on the BLUETOOTH device connected

with the system, the communication environment or the usage environment.

Specifications

Speaker section

Speaker system: 39 mm (1 9/16 in) Full range / Enclosure type: Built-in passive radiator

Amplifier section

Reference output power: 2.5 W + 2.5 W (10% T.H.D., 1 kHz, 3.2 Ω) /

Input: Stereo mini jack × 1

Output: Stereo mini jack × 1

BLUETOOTH

Communication System: BLUETOOTH Specification version 3.0 /

Output: BLUETOOTH Specification Power Class 2 / Maximum communication range:

Line of sight approx. 10 m (30 ft)*

/ Frequency band: 2.4 GHz band (2.4000 GHz -

2.4835 GHz) / Modulation method: FHSS /

Compatible BLUETOOTH Profiles*

: A2DP (Advanced Audio Distribution Profile), AVRCP

(Audio Video Remote Control Profile), HFP (Hands-free Profile), HSP (Headset Profile) /

Supported Codec*

: SBC*

, AAC*

/ Transmission range (A2DP): 20Hz - 20,000Hz

(Sampling frequancy 44.1kHz)

The actual range will vary depending on factors such as obstacles between devices,

magnetic fields around a microwave oven, static electricity, reception sensitivity,

antenna’s performance, operating system, software application, etc.

BLUETOOTH standard profiles indicate the purpose of BLUETOOTH communication

between devices.

Codec: Audio signal compression and conversion format

Subband Codec

Advanced Audio Coding

Microphone

Type: Electret condenser/ Directional characteristic: Omni directional

General

Power: Built-in lithium-ion battery, DC 5.2V (when using the supplied AC adaptor

connected to AC 100V - 240V power supply) / Rated power consumption: 3.3W

(when using the supplied AC adaptor), Approx. 0.4W (in standby mode when using

the supplied AC adaptor)/ Battery life: Approx. 10hours*

(when using the BLUETOOTH

connection) / Charging time: Approx. 3 hours*

/ Operating temperature: 5 °C to 35 °C

(41 °F to 95 °F) / Dimensions: Approx. 175 mm × 70 mm × 65 mm (7 in. × 2 7/8 in. × 2

5/8 in.) (w/h/d) / Mass: Approx. 400 g (14 oz.) including the rechargeable battery /

Supplied accessories: AC adaptor AC-E5212 (1), Quick Start Guide (1), Reference Guide

(this document) (1)

Time may vary, depending on the temperature or conditions of use.

Design and specifications are subject to change without notice.

Personal

Audio System

Reference Guide US

Guide de référence FR

Guía de referencia ES

SRS-BTS50

http://www.sony.net/

4-466-340-11(1)

This equipment complies with FCC/IC radiation exposure limits set forth for an

uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines

in Supplement C to OET65 and RSS-102 of the IC radio frequency (RF) Exposure rules.

This equipment has very low levels of RF energy that are deemed to comply without

testing of specific absorption ratio (SAR).