User Manual

ManualsBrandsSony ManualsElectronicsXB10 Portable Wireless Speaker with Bluetooth, Blue, med

Listening to music wirelessly with two speakers

(Speaker Add function)

By connecting two SRS-XB10 speakers via BLUETOOTH, you can select audio

reproduction between stereo mode (stereo sound) and double mode (monaural sound).

To use this function, two SRS-XB10 speakers are required.

Select from the following two playback methods.

Double mode

Both speakers play the same sound. Double mode is the initial setting.

Stereo mode

One speaker plays the sound on the right channel (right side), while the other speaker

plays the sound on the left channel (left side) for stereo playback between the speakers.

Note

 Turn off both speakers before setting up the Speaker Add function.

1. Set up the first speaker.

1. Press the (power) PAIRING button on one of the speakers to turn it on.

The (BLUETOOTH) indicator begins to flash in white.

2. Press and hold the ADD button for about 3 seconds until a beep is heard.

The (BLUETOOTH) indicator keeps flashing.

Summary of content (4 pages)

PAGE 1
Listening to music wirelessly with two speakers (Speaker Add function) By connecting two SRS-XB10 speakers via BLUETOOTH, you can select audio reproduction between stereo mode (stereo sound) and double mode (monaural sound). To use this function, two SRS-XB10 speakers are required. Select from the following two playback methods. Double mode Both speakers play the same sound. Double mode is the initial setting.
PAGE 2
. Set up the second speaker. 1. Press the The (power) PAIRING button on the second speaker to turn it on. (BLUETOOTH) indicator of the speaker begins to flash in white. 2. Press and hold the ADD button for about 3 seconds until a beep is heard. When the BLUETOOTH connection is established, the (BLUETOOTH) indicators of the 2 speakers flash in white. The L/R indicators then light up.
PAGE 3
 If the 2 speakers quickly make a BLUETOOTH connection, both the and the L/R indicators may light up.  Set up the second speaker within 1 minute. If you do not set it up within 1 minute, the setting of the first speaker will be canceled. (BLUETOOTH) indicator 3. Make a BLUETOOTH connection with a BLUETOOTH device. When the (BLUETOOTH) indicator of the speaker stops flashing and lights up, the BLUETOOTH connection is established. 4.
PAGE 4
Note  If you reset or initialize one of the two speakers while using the Speaker Add function, make sure to turn off the other speaker. If you do not turn off the other speaker before restarting the Speaker Add function, there may be problems in making a BLUETOOTH connection and outputting sound.